Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 13
  • Item type:Ítem,
    Análisis de las propiedades físico-mecánicas y resistencia de los suelos con la incorporación de la ceniza de hoja de bambú
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03)
    Santamaria Chávez Franklin Alexis
    ;
    Ortiz Montero Santiago Andrés
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    The present research aimed to evaluate the physical-mechanical properties and the strength of two types of soil through the incorporation of bamboo leaf ash (BLA) in proportions of 4 %, 5 %, and 6 %. Two soils of different origin were analyzed: one extracted from the city of Ambato, classified as clayey sand (SC), and another from Santa Clara, classified as silt of medium-low plasticity (ML). The study was carried out in three phases: the characterization of the soils in their natural state, the incorporation of ash in the three indicated proportions, and the technical comparison of the results to determine the optimum proportion of addition. Tests of moisture content, particle-size analysis, Atterberg limits, standard Proctor, and CBR were performed. With the ash, the CBR of both soils increased. That of Ambato rose from 7.90 % to 15.40 % with 5 % ash, and that of Santa Clara from 2.58 % to 5.40 % with 4 %. In the Ambato soil, the behavior became non-plastic upon adding 4 % ash, whereas in the Santa Clara soil the plasticity decreased as each proportion was added. It was concluded that the optimum percentage of ash depends on the type of soil.
  • Item type:Ítem,
    Evaluación superficial y de la estructura del pavimento de la vía Pelileo – Guayaquil abscisa 0+000 – 4+580, ubicada entre los cantones Quero y Pelileo de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Toaquiza Licta, Jonathan Freddy
    ;
    Moreira Cedeño, Fricson Lutgardo
    The Pelileo-Guayaquil highway connects the Quero and Pelileo cantons, and its analysis is truly crucial. So far, no previous study has been conducted on this road, leading to the proposal of a road maintenance plan. Both qualitative and quantitative research methods were employed due to the analysis of the physical components of the structure. The process began with a traffic count, obtaining the value of the Average Daily Traffic (ADT) and Projected Traffic. Samples were taken from the subgrade and granular part of test pits, with 1 cubic meter samples for every kilometer. These samples underwent tests such as gradation, Atterberg limits, Modified Proctor, and California Bearing Ratio (CBR). According to the MTOP-2002 classification, the road was identified as a medium-capacity C1-type highway. Subsequently, the pavement was analyzed using the PCI method, revealing that the road is in a "Good" condition. Pavement deflections were moderately good, and a fine sand A – 3 was obtained with an average CBR of 28.475 percent, indicating excellent suitability for the subgrade. Similar tests were conducted on the granular part, categorizing it as a Base Class 4 with an average CBR of 87.73 percent. The abrasion test resulted in an average value of 38.43 percent, indicating an "Excellent" rating for the base. Finally, a road maintenance plan was established, which can be executed with a budget of $208,533.13. This information will be valuable in understanding the physical components of the pavement structure.
  • Item type:Ítem,
    Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Pinguilí-Rosal-Yanahurco en el tramo de la ABSCISA K4+000 a K8+000 perteneciente al cantón Mocha, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09)
    Oleas Córdova, Iván Moisés
    ;
    Aldás Sánchez, Milton Rodrigo
    Seeing and understanding that the section of road studied is not in an optimal state, thus hindering access, communication, and connectivity in the area, with this technical project we seek to propose a conservation plan for the structure of the layer rolling. For this, first, a georeferenced survey was carried out, using RTK, with this we determined the dimensions of the road, in addition to highlighting key points, such as ditches, storm sewers and other sections. Subsequently, a manual count and typing of the vehicles was carried out, a process that was carried out for a week in a period from 06:00 to 18:00, for the subsequent calculation of the TPDA. As a next step, we proceeded with the taking of soil samples, making test pits, which were excavated two for each kilometer of track studied, the material obtained was transferred to the laboratory to be later tested. A visual inspection of the road was carried out, a process with which we identified and classified the different types of damage existing in the surface layer to determine PCI. After that, the respective test was carried out with the Benkelman beam whose main objective is to determine the deflections of the pavement. With all the processes carried out previously, we came to establish that the road needs routine maintenance that will help prolong its useful life, helping to maintain in optimal condition such a vital heritage for the interconnection of the parishes.
  • Item type:Ítem,
    Diseño de la vía Atipillahuazo, desde la vía fundadores del cantón hasta la calle Bolívar y la intersección de la vía Atipillahuazo hasta la intersección de la vía Cochaló del cantón Píllaro en la provincia de Tungurahua, con la finalidad de mejorar la conectividad vial de los sectores mencionados
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-07)
    Toscano Avila, Jean Pool
    ;
    Bayas Altamirano, Myriam Marisol
    Given that the road is in poor condition, this project is proposed trying to improve the quality of life of the inhabitants of the sectors, where the respective topographic survey was carried out with RTK equipment, the road traffic count, (TPDA), which was done for a week, from Monday to Sunday with an interval of 12 hours, where it was determined as a Type IV Road, a local road, as stipulated in the MTOP regulations. The respective soil study was also carried out, where pits were made every 500 m of the projected road, in order to carry out tests such as: Moisture Content, Granulometry, Atterberg, Proctor and CBR limits, of each one of them. they took 10 samples where the most critical value was taken for a detailed example, later the respective plans and referential budget were made. By having the design of the road, vehicular and pedestrian traffic will flow more quickly and safely, reflecting the benefit in the families of the sector, which will help in reducing the time for the displacement of the inhabitants, optimizing their social and economic condition. and progress will be achieved in the socioeconomic aspect of the sector, because the area is highly productive in milk and vegetables.
  • Item type:Ítem,
    Propuesta de un proceso de conservación para la estructura de la capa de rodadura de la vía Mocha-Pinguilí-Yanahurco, en el tramo de la abscisa k0+000 a k4+000 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-01)
    Lara Pérez, Lenin Alejandro
    ;
    Aldas Sánchez, Milton Rodrigo
    The section of the road under study at this moment is not in optimal condition, which makes mobility difficult because of the fact that it is the connection point between cantonal capitals such Mocha - Cevallos being a highly productive (populated) area, which causes there to be inefficient marketing of this products. For the development of this technical work, a georeferenced survey was initially carried out with the help of an RTK, this determines the length, width, ditches, water passages, and other sections of the road. A manual count of the types of vehicles that circulate on the road the Annual Average Daily Traffic (TPDA) was determined, this was done during a week with 12 daily hours taken into account from 6:00 a.m. to 6:00 p.m. Subsequently, soil test pits were extracted, two per kilometer, and altered soil samples were obtained to be tested in the laboratory and the granulometry, compaction, Atterberg limits and California Support Index (CBR) test were determined. The Pavement Condition Index (PCI) study was carried out, through which the degree of severity of the damages located in the surface layer was identified. Finally, the test was carried out with the Benkelman beam, which allowed determination of the deflections of the pavement. Once the results of the tests were obtained, graphs, tables, abacuses and plans were made, which allowed them to be clearly interpreted.
  • Item type:Ítem,
    Evaluación de la geomalla en base de fibra de coco para la estabilización de taludes
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-09)
    Ases Caizabanda, Mayra Elizabeth
    ;
    Bayas Altamirano, Myriam Marisol
    The present experimental work proposes to stabilize a slope using a coconut fiberbased geogrid. We proceeded to obtain four samples, one in each pit, located in four specific points of the Slope of the Curva Brava located in the Santa Rosa parish, Ambato canton, the coconut fiber was acquired from the Ambato canton, the collected samples turned out to be enough to perform the tests. Field and laboratory tests were carried out to determine physical and mechanical properties of each sample. To identify the type of soil, a granulometric analysis and the determination of the Atterberg Limits were carried out using the tables of the Unified Soil Classification System (SUCS). The meshes were made by detaching the fibers from the coconut and allowing the climate to dry to facilitate the handling of the fiber. The dimensions of the fibers were 1m x 1m, with a separation of 15cm, 4 meshes were assembled in different directions and 45m of coconut fiber were used for all meshes. For the evaluation, the characteristics and properties of the soils were analyzed, results that were not favorable, but with the implantation of coconut fiber, the vegetal layer of the soil improved and thus avoid the erosion that exists in the Slope. Coconut meshes are a future environmental alternative to stabilize slopes.
  • Item type:Ítem,
    Correlación entre el CBR, DCP, las propiedades índices y mecánicas en los suelos de la parroquia Río Negro del cantón Baños de Agua Santa, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-08)
    López Sánchez, José Luis
    ;
    López Arboleda, Alex Gustavo
    The purpose of this experimental work aims to determine the correlation between the laboratory CBR and the index and mechanical properties of the soils of the Río Negro parish of the Baños de Agua Santa canton, Tungurahua province. To start with the technical part, the most representative roads of the parish were identified for taking soil samples, where pits were made removing the layer of vegetal soil. The field tests and the taking of samples of approximately 50 kg for each point were carried out for the different tests to be carried out in the laboratory, in which the AASHTO regulations were applied. According to the results obtained in the field and laboratory tests, the simple and multiple correlations were carried out, applying the regression analysis and the least squares method respectively. Acceptable correlations were selected, according to the determination coefficient that is greater than 50 percent. Finally, 30 correlations were found where the coefficient of determination varies between 52 percent and 92 percent, this means that the CBR of the correlations is close to the laboratory CBR, therefore, they can be used for the design of pavements. flexible.
  • Item type:Ítem,
    Plan de conservación para la estructura del pavimento de la vía Panzaleo - Mulalillo (Chirinche Bajo) en el tramo de la abscisa 3+500 hasta 7+500 de la provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03)
    Tibán Mashapuncho, Edwin Patricio
    ;
    Moreira Cedeño, Fricson Lutgardo
    The purpose of this degree work is to propose a conservation plan for the pavement structure of the Panzaleo - Mulalillo road in the specified section, for which several activities described below were carried out. In the first instance, a topographic survey of the road was carried out, and to establish the condition of the current pavement, the Pavement Condition Index (PCI) method was used, which through visual inspections on the surface identifies types of deterioration, severity and quantity that allow to establish the possible causes of deterioration at the surface level. In addition, to fully and functionally evaluate the pavement structure of the road under study, the test was carried out with the Benkelman Beam, which does not demand many resources and is a non-destructive test, it does not alter the integrity of the system. This test allows to obtain an objective and realistic evaluation of the structural behavior of the pavement since in many pavements the problem lies in terms of its structure; in this way an effective maintenance decision can be made. Likewise, in order to carry out laboratory tests and soil studies, soil samples were collected along the road in the specified section, aware of the fundamental role in the general behavior of the road played by the characteristics and mechanical properties of the materials that make up the different layers of the pavement structure; also considering the effect of traffic and weather conditions to which the road is exposed. Based on the analysis and results obtained according to the established standards, it was concluded that the Panzaleo - Mulalillo road in the province of Cotopaxi is in very good conditions of service to its users and a routine maintenance is proposed.
  • Item type:Ítem,
    Diseño geométrico de la vía Pinllopata – El Corazón en el tramo 0 + 000 hasta 4 + 000 perteneciente al cantón Pangua de la provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03)
    Castellano Bonilla, Jonatan Raúl
    ;
    Moreira Cedeño, Fricson Lutgardo
    This present technical project was to carried out from the Pinllopata’s parish to El Corazón in order to carry out the traffic study, topographic survey of the area and the soil study, in which the different technical aspects are presented to detail the geometric design of the road, complying with the regulations imposed by the Ministry of Transport and Public Works. From Sunday 17 to Saturday 23 November 2019, the vehicle count was carried out, which was taken as a control point in the Empalme sector, the count was carried out manually for 12 uninterrupted hours with intervals of 15 minutes according to the geometric design regulations of the MTOP. The topographic study was accomplished from Wednesday, December 11 to Saturday, December 14, 2019 where the characteristics of the terrain were determined by placing reference points by means of stakes and targets in order to capture orthophotos with an amplitude of 100 m on each side from the axis of the track. The soil study was accomplished on Saturday, December 14, where soil samples were taken through pits, in order to know the characteristics and properties of the soil for the subsequent development of the pavement structure, under the AASHTO-93 regulations.
  • Item type:Ítem,
    Implementación del proceso de conservación de la estructura de la capa de rodadura de la vía Montalvo Totoras en el tramo 0+000 hasta 4+000 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-01)
    Pico Vaca, Gabriela Estefanía
    ;
    Guevara Robalino, Jorge Javier
    The present technical work aims to implement a conservation process in the asphalt layer of the Montalvo-Totoras road, methods were applied with data obtained in the field and in the laboratory, which provided a clearer vision of the current physical characteristics of the road. This project began with the georeferenced survey using the Garmin GPSMAP 64s, obtaining a total of 600 points that were taken every 20 meters, which determined the 4000 meters length of a single section road with two lanes in different directions, the existence of signage and rainwater drainage ditches was found. The 12-hour vehicle count in 15-minute intervals for 7 consecutive days served to calculate the future ADT of 1122 vehicles / day, being within the range of 1000 to 3000 vehicles / day (Class II collector), it indicates that the road is not It will require some expansion within 20 years since the number of lanes currently on the road will be sufficient for the expected traffic. By means of the PCI method based on field visualization, a record of failures was made and with the non-destructive test of the Benkelman Beam the deflections in the track were calculated. It was also verified that the subgrade is in a fair to good state by the CBR test for the wearing course.