Correlación entre el CBR, DCP, las propiedades índices y mecánicas en los suelos de la parroquia Río Negro del cantón Baños de Agua Santa, provincia de Tungurahua
No Thumbnail Available
Date
2021-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The purpose of this experimental work aims to determine the correlation between the
laboratory CBR and the index and mechanical properties of the soils of the Río Negro
parish of the Baños de Agua Santa canton, Tungurahua province.
To start with the technical part, the most representative roads of the parish were
identified for taking soil samples, where pits were made removing the layer of vegetal
soil. The field tests and the taking of samples of approximately 50 kg for each point
were carried out for the different tests to be carried out in the laboratory, in which the
AASHTO regulations were applied.
According to the results obtained in the field and laboratory tests, the simple and
multiple correlations were carried out, applying the regression analysis and the least
squares method respectively. Acceptable correlations were selected, according to the
determination coefficient that is greater than 50 percent.
Finally, 30 correlations were found where the coefficient of determination varies
between 52 percent and 92 percent, this means that the CBR of the correlations is close
to the laboratory CBR, therefore, they can be used for the design of pavements.
flexible.
Description
Este presente trabajo experimental tiene como objetivo determinar las correlaciones
entre el CBR y las propiedades índices y mecánicas de los suelos de la parroquia de
Río Negro del cantón Baños de Agua Santa, provincia de Tungurahua.
Para iniciar con la parte técnica, se identificó las vías de la parroquia más
representativas para la toma de muestras de suelo, donde se realizó calicatas retirando
la capa de suelo vegetal. Se realizó los ensayos de campo y la toma de muestras de
aproximadamente 50 kg por cada punto esto para los distintos ensayos a realizarse en
el laboratorio, en el cual se aplicó la normativa AASHTO.
De acuerdo a los resultados obtenidos en los ensayos de campo y laboratorio, se realizó
las correlaciones simples y múltiples, aplicando el análisis de regresión y el método de
mínimos cuadrados respectivamente. Se seleccionó las correlaciones aceptables, de
acuerdo al coeficiente de determinación que sea mayor al 50 por ciento.
Finalmente, se encontró 30 correlaciones donde el coeficiente de determinación varía
entre el 52 por ciento y el 92 por ciento, esto significa que el CBR de las correlaciones
se aproxima al CBR de laboratorio, por lo tanto, se pueden utilizar para el diseño de
pavimentos flexibles.
Keywords
DCP, CBR, PROPIEDADES ÍNDICE, PROPIEDADES MECÁNICAS, LÍMITES DE ATTERBERG