Ingeniería Mecánica
Permanent URI for this collectionhttp://repositorio.uta.edu.ec/handle/123456789/900
Browse
5 results
Search Results
Item Diseño y desarrollo de un sistema semiautomático tipo araña para la inspección de juntas soldadas en tuberías mediante el equipo MFD 800B utilizado en el laboratorio de materiales de la Carrera de Ingeniería Mecánica de la Facultad de Ingeniería Civil y Mecánica(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020-10) Aleaga Ulloa, Eduardo Alfonso; Paredes Salinas, Juan GilbertoThe development of this research project is focused for use in the materials laboratory of the Mechanical Engineering Career at the Universidad Técnica de Ambato, specifically for the area of non-destructive testing. The mechanism is designed to generate greater reliability and veracity in the acquisition of data for an ultrasound test. Currently, a conventional or manual test is used in the facilities, which, in general, and for reasons proper to the experience of the personnel involved in this context., yields unreliable results. Its main structure is made of acrylic and steel. The elements have been joined by using bolts and nuts. Instead, bearings and wheels have been used for movement around the pipe. Similarly, a worm screw and two motors were required to produce the movement when handling in free software. The final results required the use of API 1104, here are all the minimum factors that must be included in the generation of results in the analysis (manual, automatic, seiautomatic) by ultrasound in pipes. Likewise, the data that must be available for the measurement equipment is appreciated. Finally, the efficacy of a semi-automatic ultrasound test with respect to a conventional test was determined.Item Diseño y construcción del sistema mecánico para el ensayo de doblado guiado en juntas soldadas para los laboratorios de la Facultad de Ingeniería Civil y Mecánica(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020-10) Abad Sarango, Edgar Patricio; Analuiza Maiza, Oscar IvánFor the elaboration of this technical project, the bibliographic information was compiled from various sources, with this information the first design proposal was made based on the ASTM E190 standard and the AWS B4.0 standard, after several corrections it was obtained a final design, later the design was drawn in software to verify its resistance in the loads and stresses to which it was to be subjected, to obtain a satisfactory result, this project was built with 2 types of materials: A36 steel for its machinability and accessibility in the market and also with 304L stainless steel (UNS S30400) that has a high corrosive resistance, in addition a test procedure and a laboratory guide were carried out, once the construction of the mechanical system was completed, it was installed in the 30-ton hydraulic press that is in the welding laboratory, the operation of all its elements was verified, finally several tests were carried out at different thicknesses with the respective pistons and in compliance with all the procedures dictated by the ASTM E190 standard and the AWS B4.0 standard, after this the tests carried out show reliable results, in this way the proposal prepared has met the requirements of the issue raised.Item Diseño y desarrollo de un sistema semiautomatico de 3 ejes para la inspeccion de juntas soldadas a tope mediante ultrasonido a traves del equipo MFD 800B utilizado en el laboratorio de materiales de la Facultad de Ingenieria Civil y Mecanica(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2019) Solís Santana, Guillermo Alfonso; Paredes Salinas, Juan GilbertoThis project aims to realize a semiautomatic system which allows to control the movement of the MFD 800B with computer generated commands through the arduino control software in order to facilitate the use to the user, and provide greater firmness and precision in the measurements. In said system the plates to be counted must be positioned, for which calculations were made of the maximum effort that the same can support. In the programming you will find two options which were taken based on the aforementioned equipment. First we have the option for straight transducers which have a functionality to generate waves along their own axis. For the second option there are transverse transducers which generate waves at angles established by each sensor. To obtain the materials, it was decided to carry out a weighting of criteria, with which different alternatives were obtained for each part of the system; A selection was made for the materials of the base, these were decided for being transmission steel to be able to support the loads of the plates and for the joints ABS plastic was used. For parts such as the roof it was decided to use MDF because it does not support loads and have a much lower cost than commonly used covers. Then tests were performed to check the operation of the machine and it was decided to create a user manual in order to avoid inconveniences in the use of the equipment.Item Estudio del proceso de soldadura GMAW con alambre ER70S-3 y er70s-6 en el proceso de fabricación de carrocerías utilizando perfiles conformados de acero galvanizado ASTM A-924m para determinar la defectología en las juntas soldadas en la empresa Carrocerías Fiallos(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2016) Corrales Córdova, Jairo David; Paredes Salinas, Juan GilbertoItem Estudio de los métodos de ensayos no destructivos bajo la norma API 650 y su incidencia en la evaluación de juntas soldadas en tanques de almacenamiento(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2015) Villavicencio Pérez, Gonzalo Alberto; Paredes Salinas, Juan GilbertoPara el desarrollo de la investigación se realizó un análisis o investigación de campo por los diferentes métodos de ensayos no destructivos como: inspección visual (VT), líquidos penetrantes (PT) y por el método de ultrasonido (UT) con los cuales se pudo encontrar las diferentes discontinuidades tanto superficiales así como discontinuidades internas de las juntas soldadas en tanques de almacenamiento, además se realizó macrografías de las juntas soldadas a tope y a filete en la parte inicial y final de los cordones de soldadura indicando si los los parámetros de soldadura que se aplicó fueron los correctos como la penetración del material de aporte, geometría de la junta soldada. Obteniendo como resultado que el método más eficaz y con mayor exactitud en comparación con los otros métodos de ensayo o destructivo, fue el método de ultrasonido (UT) indicados en la Norma ASME sección V artículo V en sus parámetros de evaluación y en los criterios de aceptación y rechazo, fue de mayor exactitud en la detección tanto en discontinuidades superficiales e internas en juntas soldadas en tanques de almacenamiento. Mediante las conclusiones y recomendaciones obtenidas por el estudio y el análisis se pudo dar una propuesta que ayude a dar una solución a al tema de estudio de nuestra investigación. Con los resultados ya expuestos, analizados, recomendaciones y con la comparación de los diferentes métodos de ensayos no destructivos se propone un procedimiento de inspección en juntas soldadas en tanques de almacenamiento bajo la norma API 650- ASME sección V artículo V por el método de ultrasonido en 2 cual tiene procesos indispensables así como sus actividades que se deben llevar a cabo de manera ordenada en el momento de la ejecución de este procedimiento de inspección. Además se trabajó con el equipo MITECH (MFD800B) disponibles en los laboratorios de la facultad dando un procedimiento de calibración para los diferentes tipos de transductor y poder encontrar con mayor facilidad las discontinuidades existentes en las juntas soldadas.