Diseño y construcción del sistema mecánico para el ensayo de doblado guiado en juntas soldadas para los laboratorios de la Facultad de Ingeniería Civil y Mecánica
No Thumbnail Available
Date
2020-10
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
For the elaboration of this technical project, the bibliographic information was compiled
from various sources, with this information the first design proposal was made based on
the ASTM E190 standard and the AWS B4.0 standard, after several corrections it was
obtained a final design, later the design was drawn in software to verify its resistance in
the loads and stresses to which it was to be subjected, to obtain a satisfactory result, this
project was built with 2 types of materials: A36 steel for its machinability and
accessibility in the market and also with 304L stainless steel (UNS S30400) that has a
high corrosive resistance, in addition a test procedure and a laboratory guide were
carried out, once the construction of the mechanical system was completed, it was
installed in the 30-ton hydraulic press that is in the welding laboratory, the operation of
all its elements was verified, finally several tests were carried out at different
thicknesses with the respective pistons and in compliance with all the procedures
dictated by the ASTM E190 standard and the AWS B4.0 standard, after this the tests
carried out show reliable results, in this way the proposal prepared has met the
requirements of the issue raised.
Description
Para la elaboración de este proyecto técnico se procedió a la recopilación de
información bibliográfica de varias fuentes, con esta información se realizó la primera
propuesta de diseño en base a la norma ASTM E190 y la norma AWS B4.0, después de
varias correcciones se obtuvo un diseño final, posteriormente el diseño se lo dibujo en
un software para verificar la resistencia del mismo en las cargas y esfuerzos a los que
iba a ser sometido, para obtener un resultado satisfactorio, este proyecto se construyó
con 2 tipos de materiales: acero A36 por su máquinabilidad y accesibilidad en el
mercado y también con acero inoxidable 304L (UNS S30400) que tiene una alta
resistencia corrosiva, además se realizó un procedimiento de ensayo y una guía de
laboratorio, una vez terminada la construcción del sistema mecánico se lo instaló en la
prensa hidráulica de 30 toneladas que está en el laboratorio de soldadura, se verificó el
funcionamiento de todos sus elementos, finalmente se realizaron varios ensayos a
diferentes espesores con los respectivos émbolos y cumpliendo con todos los
procedimientos que dicta la norma ASTM E190 y la norma AWS B4.0 luego de esto los
ensayos realizados muestran resultados confiables, de esta manera la propuesta
elaborada ha cumplido con las exigencias del tema planteado.
Keywords
JUNTAS SOLDADAS, ENSAYO DE DOBLADO, ACERO A36, SOLDADURA, ENSAYOS DESTRUCTIVOS, ENSAYO DE DOBLADO GUIADO, SISTEMAS MECÁNICOS, ACEROS, ÉMBOLOS, PRENSA HIDRÁULICA, ASTM E190, AWS B4.0