Ingeniería Mecánica

Permanent URI for this collectionhttp://repositorio.uta.edu.ec/handle/123456789/900

Browse

Search Results

Now showing 1 - 4 of 4
  • Item
    Diseño y construcción de un molino de bolas para aplicaciones de pulvimetalurgia en los Laboratorios de Ingeniería Mecánica de la Facultad de Ingeniería Civil y Mecánica de la Universidad Técnica de Ambato
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2017) Cabezas Casco, Erik Andrés; López Villacís, Gonzalo Eduardo
    The ball mill is designed to help obtain new mechanical alloys, the design part of the amount by weight of material to be ground which is 2 kg. The ball mill has a stainless steel drum, the dimensions are 21 cm diameter and 34 cm in length ideal to withstand high grinding temperatures, it is also designed under milling parameters such as the critical speed at which the mill must operate, the actual power to be generated by the mill, is capable of supporting up to 18 kg which are decomposed into material to be ground, 8 kilograms by weight of the grinding bodies and 8 kilograms in wet milling, the support capacity of the drum is determined by software of fine elements, this type of mills is indispensable the calculation of the system of cascade, so that in the construction of the mill was added 4 interior grids that facilitates the obtaining of the metallic powder. In order to maintain the critical speed of 74 rpm, the transmission ratio in which the required gear unit and chain drive system is determined is calculated. The ball mill according to the distribution of the balls can obtain a size of 20 um of grain, which makes it ideal for making new mechanical alloys.
  • Item
    Estudio de la aleación de aluminio 6063-T5 utilizada en pasamanos de buses para disminuir el riesgo de contaminación biológica con ensayos en ambientes controlados
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2017) Martínez Barrera, José Stalin; Espín Lagos, Segundo Manuel
    In this study the main objective is to analyze the reduction of biological contamination on bus’s handrails made of aluminum alloy 6063-T5. Many tests had been performed in typical handrail’s material samples under controlled environments to determine whether to find antimicrobial properties or not in these material. The experimental investigation was performed to determine mechanical properties of aluminum alloy 6063-T5 and also biological test methods to investigate whether or not the inhibition of bacterial growth. Recount method on aluminum alloy 6063-T5 samples to establish the number of bacteria found with two sample replicates and dilutions using the laminar flow cabinet and laboratory incubator. Finally, to estimate the number of viable bacteria in the samples, we use the colony-forming unit (CFU/ml) to determine which material response with positive antimicrobial properties and it was possible to find that AA6063-T5 is not recommended to be use in bus’s handrails and all the others aluminum alloys with high levels of copper in their chemical composition are well suited due to its antimicrobial properties under the technical recommendation of the Environmental Protection Agency - EPA
  • Item
    Estudio de los factores de arena de moldeo utilizados en la obtención de piezas fundidas de aluminio para determinar la calidad de los productos elaborados en los Laboratorios de la Carrera de Ingeniería Mecánica de la Universidad Técnica de Ambato
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2016) Martínez Martínez, Milton Fabián; Vaca Ortega, Wilson Henry
  • Item
    Estudio de la aleación de ZnAl para determinar su aplicación industrial
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2015-02) Santana Jácome, Santiago Vladimir; Espín Lagos, Segundo Manuel
    El presente trabajo muestra la investigación que se realizó al fundir materiales no ferrosos como el zinc y aluminio, para dicho análisis se analizaron 6 casos con diversos porcentajes de zinc y aluminio (base zinc), así se pudo comparar sus diferentes propiedades, gracias a lo cual se logró determinar una aplicación industrial para la aleación obtenida. Se realizaron los diferentes tipos de ensayos tales como: tracción, dureza, análisis metalográfico, impacto y análisis químico en los laboratorios de la Facultad de Ingeniería Civil y Mecánica de la Universidad Técnica de Ambato, con los cuales se pudo determinar los diferentes valores de propiedades mecánicas por cada caso mismos que fueron tabulados y analizados. Se obtuvieron conclusiones y recomendaciones en base a los resultados obtenidos, mismos que contribuyeron a determinar una aleación con propiedades que permiten su utilización en la industria.