Diseño y construcción de un molino de bolas para aplicaciones de pulvimetalurgia en los Laboratorios de Ingeniería Mecánica de la Facultad de Ingeniería Civil y Mecánica de la Universidad Técnica de Ambato
No Thumbnail Available
Date
2017
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
The ball mill is designed to help obtain new mechanical alloys, the design part of
the amount by weight of material to be ground which is 2 kg. The ball mill has a
stainless steel drum, the dimensions are 21 cm diameter and 34 cm in length ideal
to withstand high grinding temperatures, it is also designed under milling
parameters such as the critical speed at which the mill must operate, the actual
power to be generated by the mill, is capable of supporting up to 18 kg which are
decomposed into material to be ground, 8 kilograms by weight of the grinding
bodies and 8 kilograms in wet milling, the support capacity of the drum is
determined by software of fine elements, this type of mills is indispensable the
calculation of the system of cascade, so that in the construction of the mill was
added 4 interior grids that facilitates the obtaining of the metallic powder. In order
to maintain the critical speed of 74 rpm, the transmission ratio in which the required
gear unit and chain drive system is determined is calculated. The ball mill according
to the distribution of the balls can obtain a size of 20 um of grain, which makes it
ideal for making new mechanical alloys.
Description
El molino de bolas está diseñado para ayudar a obtener nuevas aleaciones
mecánicas, el diseño parte de la cantidad en peso de material a moler que es de 2
Kg. El molino de bolas tiene un tambor de acero inoxidable, las dimensiones son
de 21 cm de diámetro y 34 cm de longitud ideal para soportar altas temperaturas
de molienda, además está diseñado bajo parámetros de molienda como la velocidad
crítica a la que debe funcionar el molino , la potencia real la cual debe generar el
molina , es capaz de soportar hasta 18 kg los cuales se descomponen en material a
moler , 8 kilogramos en peso de los cuerpos moledores y 8 kilogramos en molienda
húmeda, la capacidad de soporte del tambor está determinado mediante un
software de elementos finos, este tipo de molinos es indispensable el cálculo del
sistema de cascada, por lo que en la construcción del molino se añadió 4 rejillas
interiores que facilita la obtención del polvo metálico. Para mantener la velocidad
crítica de 74 r.pm., se calcula la relación de transmisión en la que se determina el
reductor necesario y el sistema de transmisión mediante cadena. El molino de bolas
de acuerdo con la distribución de las bolas es capaz de obtener un tamaño de 20
um de grano, lo que lo torna ideal para realizar nuevas aleaciones mecánicas.
Keywords
MOLINO DE BOLAS, ALEACIONES, POLVO METÁLICO, CUERPOS MOLEDORES, VELOCIDAD CRÍTICA, MOLINO DE TAMBOR, MOLINO ATTRITOR, CUPROALUMINIO