Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
21 resultados
Resultados de la búsqueda
Item type:Ítem, Análisis comparativo de parámetros de compactación en muestras de suelos granulares del cantón Patate, provincia de Tungurahua empleando los métodos Proctor estándar, Proctor modificado y un método alternativo propuesto(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01) ;Manjarrés Sánchez Ana Paula ;Portilla Yandun Favio PaulUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis research aimed to comparatively analyze the compaction parameters of granular soil samples from Patate Canton, Tungurahua Province, through the application of the Standard Proctor, Modified Proctor, and a proposed alternative method (K-A-P). The study was conducted under a quantitative and experimental approach using representative soil samples collected from the parishes of Tunga, San Javier, and Yamate. The methodology included the physical and mechanical characterization of the soils through grain size distribution, specific gravity, and Atterberg limits tests, followed by the execution of compaction tests and a comparative analysis of the obtained results. The results indicated that the studied soils correspond to well-graded sands (SW), with sand contents ranging from 72.81% to 83.72%, fines contents between 11.01% and 19.19%, and specific gravity values ranging from 2.617 to 2.655 g/cm³. Plasticity index values varied from 4.69 to 6.78, demonstrating low plasticity characteristics. The proposed K-A-P method achieved a compaction energy of 35,720.74 lb·ft/ft³, which is very close to that of the Modified Proctor test (35,481.97 lb·ft/ft³), showing an approximate difference of 1%. Likewise, the maximum dry density and optimum moisture content results presented relative errors below 1% in most of the samples analyzed. It is concluded that the proposed alternative method constitutes a technically viable option for the compaction of granular soils, as it reproduces results comparable to those obtained with the Modified Proctor method while optimizing resources, execution time, and operational simplicity in laboratory testing.Item type:Ítem, Análisis comparativo de las propiedades físico-mecánicas de dos suelos naturales y estabilizados con ceniza de la planta de arveja(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-06-30) ;Garcés Calapiña Alex Fabian ;Cevallos Cabrera Jorge WashingtonUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe objective of this research was to comparatively analyze the physical-mechanical properties of soils from Mera (Pastaza) and Unamuncho (Tungurahua), stabilized with pea plant ash (CPA) at percentages of 1.5%, 2%, and 2.5%. For the development of the study, moisture content, grain size analysis, Atterberg limits, modified Proctor, CBR, and X-ray fluorescence (XRF) chemical analysis tests were performed, guided by ASTM and AASHTO standards. The results showed that both soils are granular materials with fines, classified as A–2–4 (silty sand) according to the AASHTO system and SP–SM (poorly graded sand with silt) by the USCS system. The XRF analysis revealed that the pea plant ash (CPA) contains strong components of calcium (Ca) and silicon (Si); these elements facilitated a cation exchange that progressively decreased soil plasticity, and a pozzolanic reaction that increased the California Bearing Ratio (CBR). In Mera, the plasticity index decreased from 13.54% to 0.86%, and the CBR increased from 7.10% to 13.70% with 2.5% of pea plant ash (CPA). In Unamuncho, the plasticity index dropped from 5.66% to 3.25%, and the CBR rose from 10.25% to 14.10%. Likewise, a gradual increase in optimum moisture content and slight variations in maximum dry density were evidenced. The results allowed to conclude that the incorporation of 2.5% of pea plant ash (CPA) represents the optimum percentage and improved the physical-mechanical behavior of the analyzed soils, demonstrating its viability as a stabilizing material for subgrades in road projects.Item type:Ítem, Análisis del efecto de la adición de emulsión asfáltica y cemento portland en suelos de subbase clase 3(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02) ;Flores Curay, Mara AlexandraBayas Altamirano, Myriam MarisolThis study analyzed the effect that a granular material such as class 3 subbase has when adding Slow Break Cationic Asphalt Emulsion type CSS-1h and Portland Cement, with the objective of improving the bearing capacity of the subbase. Every engineering project is based on the soil, which is why it must comply with minimum parameters, resulting in the need to stabilize the soil. The analysis of the physical-mechanical properties of the granular material was carried out through laboratory tests, verifying that they meet the acceptance criteria of the MTOP for a class 3 subbase; The values obtained for maximum dry density, optimal humidity and CBR support capacity of the samples were analyzed by adding 1, 3, 5 and 8 percent of asphalt emulsion, determining the optimal percentage, the analysis of the values was repeated, but with optimal percentage of asphalt emulsion plus Portland cement percentages of 3, 6, 9 and 12 percent. With the results obtained, the design of flexible pavements was developed for the soil in its natural state as well as for the stabilized one, in order to analyze and contrast costs which are affected by the thicknesses of each layer that constitutes the structure of the pavement. Finally, the combination of 3 percent asphalt emulsion plus 5.7 percent Portland cement provides up to 61.70 percent stabilization of the soil, notably improving its bearing capacity, comparing the results with the added stabilizers.Item type:Ítem, Análisis de resultados de proyecto macro: correlación entre el CBR, DCP, propiedades índice y mecánicas en suelos de los cantones Ambato, Quero, Tisaleo, Mocha y Cevallos(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09) ;Gallegos Pandacina, María GabrielaPortilla Yandún, Favio PaúlIn this research, data corresponding to in situ and laboratory tests, obtained in previous studies, were compiled for 156 samples; field and laboratory tests were carried out to determine the properties of 6 samples from the Cevallos canton, creating a database of 162 samples in total. Correlations of 2 and 3 variables (least squares method) between index and mechanical properties were determined for the Cevallos canton (6 samples) and for the 162 samples from Ambato, Quero, Tisaleo, Mocha and Cevallos. In the first case, 23 out of 25 correlations reached correlation values equal to or higher than 50 percent; of the 22 correspondences determined for all the samples, 11 achieved correspondence results equal to or higher than 50 percent. The design of flexible pavement for the Cevallos canton was carried out in order to compare the laboratory CBR with the CBR obtained from the correlations with the highest correlation coefficient values between 2 and 3 variables: CBR vs. penetration index and CBR vs. optimum moisture - maximum dry density. The results indicate that the correlations allow obtaining CBR values quite close to the laboratory CBR and the pre-design of the pavement structural package yields similar layer thicknesses.Item type:Ítem, Estudio del efecto de la adición de emulsión asfáltica en las propiedades físico – mecánicas de suelos granulares, para el diseño de pavimentos flexibles(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-01) ;Gavilanes Pozo, Erika SamanthaPortilla Yandún, Favio PaúlIn the present experimental investigation, an evaluation on the changes of the physicalmechanical properties of granular subgrade soils by adding asphalt emulsion in different percentages in order to stabilize the soils from Ambato was perfomed. To analyze these changes on soils´properties, samples have been taken from the parishes of Izamba, Montalvo and Juan Benigno Vela to carry out essays both in the field and on the laboratory to establish a comparative analysis of the achieved CBR values between the natural soil and the soil modified with asphalt emulsion; Furthermore, it was obtained Moisture Content, Field Density, Atterberg Limits, Specific Gravity, Granulometry and modified Proctor were obtained through laboratory essays. In addition to studying the changes in these properties, the results achieved for optimal humidity, maximum dry density and CBR of the modified samples were analyzed by adding asphalt emulsion at 0, 1, 3, 5 and 8 percent in order to establish the optimal percentage where the highest values of these properties are reached in the soils. With the data obtained, the design of flexible pavements for the soil in its natural state and the design for the stabilized soil were also been made with the propose to analyze and compare prices which are influenced by the thicknesses of each layer that are part of the pavement.Item type:Ítem, Análisis comparativo entre la humedad gravimétrica y la humedad determinada con sensores electrónicos en suelos granulares del cantón Ambato. Provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03) ;Martínez Inca, Marco IsraelPortilla Yandún, Favio PaúlThrough time within the construction of different civil works, water has played a very significative role due to its importance within the branches of Civil Engineering (hydraulic, soil mechanics and structures) based on this, different standards and techniques are established depending on the use or the way in which this very important resource will be used. In the present experimental work, water was analyzed as a component in soil, implementing the alternative model to determine the humidity content of soil granules within the Ambato Canton, by means of applying electronic resistance and capacitive sensors, correlated to the reliable information obtained by means of soil normed tests. (Norms ASSHTO y CFE 10000-73). Once the results raised in the field were tabulated, comparisons were realized with the help of the program Excel, obtaining simple and multiple correlations to estimate coefficients corelated, classifying the qualitive and quantitative tests (from regular to excellent) detailing that the electronic sensors give optimum behavior (above 90 percent), those in the evaluation of the humidity content in the Proctor tests from 15 of the samples taken from the parishes in the Ambato Canton. This analysis permits obtaining the values of the humidity content of the site, limiting the time to obtain the results very similar to the values of the standard tests, its use is recommended to carry out the previous soil sample studies, with a low cost and excellent workability.Item type:Ítem, Análisis comparativo entre los valores del límite líquido obtenidos por copa de casagrande y penetrómetro de cono para suelos granulares del cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03) ;Ramírez Maiquiza, Silvia MaribelPérez Maldonado, Ruth LorenaCurrently, in the soil mechanics laboratories of Ecuador, the Casagrande cup method is the best known to determine the liquid limit of the soils standardized by ASTM D4318, while some countries use the Cone Penetrometer established by British Standard BS 1377-2:1990. A comparative analysis was carried out between these methods and not having this equipment to perform the tests in the laboratory, was designed and assembled at the INDUACCS company in Ambato, according to the specifications of BS 1377-2:1990 standard, then test trials were conducted that provided adequate results. For the tests, soil samples were taken in the 18 parishes of Ambato canton, obtaining a total of 30 specimens, which were used for laboratory tests; with the results was made a comparative statistical analysis between the values of the liquid limit obtained by testing the Casagrande cup and the Cone Penetrometer, for this analysis was applied the statistical method of minimum squares. Based on the results and analysis, it demonstrated that the alternative method using the Cone Penetrometer built in this research, is acceptable to obtain liquid limit values of granular soils, it is also important to mention that the methods have a strong positive correlation (r = 0.8228).Item type:Ítem, Estabilización de suelos granulares de subrasante con finos de tereftalato de polietileno (PET), polipropileno (PP) y polietileno (PE)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-03) ;Celi Yanchapanta, Kevin AdrianPortilla Yandún, Favio PaúlThis document deals with an experimental research, focused on stabilizing one of the layers of the pavement (subgrade) of coarse soil-type, with the addition of Terephthalate polyethylene (PET), Polypropylene (PP) and Polyethylene (PE) particles. This stabilization is based on the comparative analysis of CBR between subgrade stabilized with PET/PP/PE particles, and subgrade in natural state. To carry out this project, were sampled three representative type of granular soils, located in the parishes of Montalvo, Juan Benigno Vela and Izamba, all of them in Ambato. After that, there was an analysis of tests in situ and laboratory corresponding to: Moisture Content, Field Density, Specific Gravity, Granulometry, Atterberg Limits, Modified Proctor and CBR. In the soil samples of the Proctor and CBR tests, it was added particles of PET/PP/PE in percentages of 0, 3, 6, 9, 12 and 15. The variations of the maximum dry density, optimum moisture content and CBR values were analyzed, finding optimal stabilization values for each soil sample. As a result, an economical technical comparison was conducted between two flexible pavement designs based on CBR of non-stabilized and stabilized subgrade soils. In this way it was observed the diminution of thicknesses in the layers of the flexible pavement structure for stabilized subgrade and how influences the cost of a road.Item type:Ítem, Correlación entre el CBR y las propiedades índice y mecánicas en suelos granulares, de las parroquias Izamba y Picaihua, cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-08) ;Amaya Arcos, Johanna VanessaPortilla Yandún, Favio PaúlThe present experimental work has as objective to determine a correlation between the CBR test and the index and mechanical properties in granular soils, through in situ and laboratory tests, thus allowing to know the characteristics of the different soils of the Izamba and Picaihua parishes, obtaining a database with the purpose of applying the data obtained in the design of a flexible pavement. In the first instance, a three-way visual selection was made in each parish, which had an average length of approximately 3 km. A soil exploration was carried out by means of two soil pits both at the beginning and at the end of each road. In situ tests were carried out such as: field density with Cone and Sand, the Dynamic Cone Penetrometer (DCP) test, with the respective sampling. In the laboratory, tests of Granulometry, Specific Gravity and Atterbetg Limits were performed, which allowed characterizing and classifying the soils. The compaction tests with Modified Proctor made it possible to obtain a maximum dry density and optimum moisture content to subsequently perform the California Support Ratio (CBR) test. The data obtained were processed and analyzed statistically to determine a correlation between the index and mechanical properties with the CBR test, for later application in the design of flexible pavements.Item type:Ítem, Correlación entre el CBR y las propiedades índice y mecánicas en suelos granulares, de las parroquias Huachi Grande y Santa Rosa, cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-08) ;Vilema Peña, Hugo RodrigoPortilla Yandún, Favio PaúlThe present work is of an experimental nature and was intended to establish reliable correlations between the laboratory CBR with the index and mechanical properties of soils of Huachi Grande and Santa Rosa parishes. The presented equations a correlation coefficient, r, greater than 0.50 and were applied to establish the CBR value of a selected road based on the properties of the soil in that area. Four types of flexible pavements were designed, whose variations were the value of laboratory CBR and the CBR obtained through correlations, in addition to the considerations of low and high traffic. Three roads were selected per parish to determine two points adjacent to each road, on opposite sides or in the same direction separated with a minimum of 500 meters to make the corresponding calicatas, giving a total of 12 samples taken. For in-situ tests, the Dynamic Penetration Cone (DCP) and the Ottawa Cone and Sand for Field Density were used. In the laboratory, Granulometry, Atterberg Limits, the Determination of Specific Gravity, the Compaction Test for Modified Proctor “B” and the CBR test were performed. Once the test data of each sample was processed, they were correlated with Excel by statistical methods, to establish that there is an association between the laboratory CBR with the index and mechanical properties, because the design thicknesses did not vary using the CBR of laboratory or the one obtained through the equations.
