Estabilización de suelos granulares de subrasante con finos de tereftalato de polietileno (PET), polipropileno (PP) y polietileno (PE)
No Thumbnail Available
Date
2021-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This document deals with an experimental research, focused on stabilizing one of the
layers of the pavement (subgrade) of coarse soil-type, with the addition of
Terephthalate polyethylene (PET), Polypropylene (PP) and Polyethylene (PE)
particles.
This stabilization is based on the comparative analysis of CBR between subgrade
stabilized with PET/PP/PE particles, and subgrade in natural state. To carry out this
project, were sampled three representative type of granular soils, located in the
parishes of Montalvo, Juan Benigno Vela and Izamba, all of them in Ambato. After
that, there was an analysis of tests in situ and laboratory corresponding to: Moisture
Content, Field Density, Specific Gravity, Granulometry, Atterberg Limits, Modified
Proctor and CBR.
In the soil samples of the Proctor and CBR tests, it was added particles of PET/PP/PE
in percentages of 0, 3, 6, 9, 12 and 15. The variations of the maximum dry density,
optimum moisture content and CBR values were analyzed, finding optimal
stabilization values for each soil sample.
As a result, an economical technical comparison was conducted between two flexible
pavement designs based on CBR of non-stabilized and stabilized subgrade soils. In
this way it was observed the diminution of thicknesses in the layers of the flexible
pavement structure for stabilized subgrade and how influences the cost of a road.
Description
El presente documento trata una investigación experimental, enfocado a la
estabilización de una de las capas de la estructura de pavimento (subrasante) de tipo
suelo granular con la adición de finos de Tereftalato de Polietileno (PET),
Polipropileno (PP) y Polietileno (PE).
Esta estabilización está basada en el análisis comparativo de CBR entre subrasante
estabilizada con finos de PET, PP, PE y subrasante en su estado natural. Para la
ejecución de este proyecto se realizó la extracción de 3 muestras representativas de
suelos granulares localizados en las parroquias de Montalvo, Juan Benigno Vela e
Izamba del cantón Ambato. Posteriormente se realizaron los ensayos in situ y
laboratorio, correspondientes a: Contenido de humedad, Densidad de campo,
Gravedad específica, Granulometría, Límites de Atterberg, Proctor modificado y CBR,
y sus respectivos análisis.
En las muestras de suelo de los ensayos Proctor y CBR, se adicionó finos de PET, PP,
PE en porcentajes de 0, 3, 6, 9, 12 y 15. Se analizó las variaciones en los valores de
densidad seca máxima, humedad óptima y CBR, encontrando valores óptimos de
estabilización para cada muestra de suelo.
A raíz de esto, se realizó una comparativa técnica económica entre dos diseños de
pavimento flexible basados en los valores CBR de suelos de subrasante sin estabilizar
y estabilizados. De esta manera se pudo observar la disminución de espesores en las
capas de la estructura de pavimento flexible para la subrasante estabilizada y cómo
influye en el costo de una vía.
Keywords
ESTABILIZACIÓN DE SUELOS, SUELOS GRANULARES, TEREFTALATO, POLIETILENO, PAVIMENTOS, DIVERSIDAD DE LOS SUELOS, CAPA DE RODADURA, LA RASANTE, ENSAYOS DE SUELOS, TERRAPLENES, GRANULOMETRÍA, ESTABILIZACIÓN VOLUMÉTRICA