Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 13
  • Item type:Ítem,
    Análisis comparativo del comportamiento mecánico de la estructura de un puente vehicular tipo arco de luz de 100 m, utilizando péndolas flexibles y rígidas.
    (2025-12-03)
    Guerrero Recalde, Bryan Vinicio
    ;
    Peñafiel Valla Lourdes Gabriela
    This comparative study analyzed the mechanical behavior of a 100 m light arch steel vehicular bridge using eight different types of hangers, composed of ASTM A416 Gr270 cables (flexible) and welded I-section/box sections (rigid), with the intention of understanding how these influence the behavior of the other elements that make up the bridge. Models in RFEM 6, CSI Bridge and SAP2000 are examined using AASHTO LRFD 2020 load combinations. Every 5 meters, envelopes of axial forces, shears V₂ and V₃, moments M₂ and M₃, torsion and deflections in the tie girder and the arch were extracted and processed in Excel spreadsheets. The results show that rigid ties increase the critical load of the arch by up to 25% and extend the fundamental period from 0.69 s to 1.63 s, shifting critical frequencies and reducing dynamic response. Compared to flexible ones, they reduce vertical deflection by 96.2% (–0.145 m → –0.0055 m) and basal shear by 65.5%. The Network typology distributes shear forces and moments more uniformly, while vertical rigid ties shift axial compression from 892.59 t to 734.25 t. The statistical analysis included paired t-tests (α = 0.05) and Pearson correlation coefficients, confirming significant differences (p < 0.05) between each rigid model and its flexible counterpart. These results demonstrate that additional stiffness improves strength, overall stability, and deflection control, providing solid criteria for selecting ties in long-span arch bridges and thus balancing structural efficiency with life-cycle economy.
  • Item type:Ítem,
    Análisis de las propiedades de sección transversal de perfiles tipo UV conformados en frío
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-08)
    López Espín, Jonathan David
    ;
    Torrealba Toledo, Kevin Alexander
    ;
    Peña Jordán, Francisco Agustín
    Information on cold-formed structural elements is limited, but has become indispensable in the field of construction, as it allows for improved design and analysis of structures. In the present investigation, a comprehensive analysis of the section properties of 6 and 8 mm thicknesses was carried out. It started with a review of information to understand the behaviour of these profiles, section properties such as inertias, torsional constants and warping constants were calculated using traditional analytical methods. To validate these calculations, a mathematical model based on the finite element method (FEM) was developed, which allowed the behaviour of the cross-sections to be simulated more accurately. Experimental torsion, bending and compression tests were performed to compare the results obtained by analytical calculations and FEM analysis. In the case of the tests to determine the warping constant, technical limitations were faced, such as the lack of a high test machine for compression tests on thicker sections, which led to the use of thinner sections. Finally, the results showed that the FEM provides intermediate predictions between analytical methods and experimental tests, the differences observed in the behaviour of the specimens were discussed, conclusions were drawn on the discrepancy of results between the different methods, and recommendations for future studies were proposed, including the application of heat treatments to the profiles to improve the values obtained in the tests.
  • Item type:Ítem,
    Análisis del comportamiento a flexión del hormigón reforzado con fibras plásticas (polipropileno) después de las altas temperaturas
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09)
    Murillo Estrada, Ariel Mateo
    ;
    Ramírez Cabrera, Wladimir José
    Reinforced concrete is one of the most widely used structural elements in Ecuadorian constructions. By the fourth quarter of 2022, 79.5 percent of the material present in the structure was registered, that is, the predominant material in the country. Being so widely used, the question arose how high temperatures affect simple concrete compared to fiber-reinforced concrete. The present work studied the influence of polypropylene fibers in plain concrete after being affected at high temperatures. Obtaining a correct dosage was achieved by analyzing the characteristics of the fine and coarse aggregates, then the required resistance was verified by means of the compression test in cylindrical specimens for resistances of 210 and 240 kg/square centimeters. Once the resistance was obtained, beam-type test tubes of dimensions 10x10x35 centimeters were made where 2 dosages were used with respect to the macrofiber with 0 and 3 kg/cubic meters. After curing the specimens for 28 days, they were subjected to different temperatures: 20, 100, 280 and 600 degrees Celsius. Subsequently, the respective flexural tests (ASTM 1609) were carried out, for the elaboration of the stress vs. deflection graph where the behavior of the concrete without fibers and with fibers was compared. The comparison of the resistances and the addition of fibers in the specimens allowed us to verify the influence of these at high temperatures, improving their resistance to flexion at all exposure temperatures.
  • Item type:Ítem,
    Evaluación del comportamiento a flexión de vigas de hormigón simple, preparado a partir de materiales reciclados
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09)
    Sánchez Freire, Joseph Henry
    ;
    Peñafiel Valla, Lourdes Gabriela
    Concrete is a material in high demand in construction, due to its excellent compressive strength and easy workability it is used on a large scale nationally and internationally and concrete rubble is produced which many times is not reused and Its main destination is a dump or ravines, which causes environmental damage. The main objective of this research is to analyze the flexural behavior of beams made from recycled concrete and to carry out an adequate dosage, previous laboratory tests such as granulometry, densities and moisture content have been carried out. A total of 36 beams have been made with different dosages of 10, 15, 30, 60 and 100 percent with a resistance of 240 kg/cm2 to obtain experimental results and compare them with base beams made from coarse natural aggregate, the beams After being cured at 7 and 28 days of age, they were flexurally tested and the loads (KN), modulus of rupture (MPa) and deflections (mm) presented by each of the beams were recorded. From the results obtained, the flexural resistance of each of the beams varies according to the percentage of aggregates that constitute them, showing that the modulus of rupture at 28 days of age, the VF_30 and VF_100 beams support greater flexural loads by 5.09 and 1.77 percent compared to base concrete VF_0 beams without recycled aggregate.
  • Item type:Ítem,
    Evaluación de estado límite por deflexión en losas con vigas compuestas tipo Joist fabricadas con acero ASTM A36
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2023-03)
    Allauca Llamuca, Miguel Angel
    ;
    Cevallos Cabrera, Jorge Washington
    The goal of this project is to evaluate the limit state to deflection in slabs with composite Joist beams made of ASTM A36 steel, considering the floor systems frequently used in our country. The Joist beam design was carried out for a free length of 5.00 m and an effective width of 0.40 m, considering the specifications established in the Ecuadorian Construction Standard for the quantification of loads, then, the structural analysis of the beam was carried out in the structural analysis program to obtain the axial loads in tension and compression of the bars that are part of the Joist, and by using the SJI specifications, the upper and lower chords, diagonals of the beam web, the saddle and the shear connectors were designed. The limit state deflection analysis was carried out in the structural analysis program for the three case studies proposed in the project: Joist beam designed as noncomposite, Joist beam composed with solid slab and Joist beam composed with steel deck, applying different load values. The beams were manufactured in the VIGA-TEC workshops, located in Quito, and were transported to Ambato, to assemble the formwork and cast the concrete to form the composite sections with solid slab and steel deck. The concrete used was made with aggregates from Peninsula’s quarry of Ambato for a compressive strength of 21MPa. The experimental load/strain test was carried out at the Technical University of Ambato at the Ingahurco campus following the requirements of the AISC 360-16 and American National Standard SJI 200 - 2015 codes. Finally, the results of the experiment were used to evaluate the deflection limit states of the three case studies presented in this project.
  • Item type:Ítem,
    Optimización - MSR del material compuesto de matriz epoxi reforzado con fibra natural Chambira (Astrocaryum) y sintética (vidrio) mediante infusión de resina al vacío y su incidencia en las propiedades mecánicas
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-03)
    Tipantasig Pérez, Johnny Israel
    ;
    Paredes Salinas, Juan Gilberto
    The present experimental work seeks to determine the optimization of the mechanical properties of the compound developed by means of an Epoxy resin matrix (Aeropoxy), reinforced with two layers of natural chambira fiber (Astrocaryum) and a synthetic glass fiber (Fiber Glass HexForce 7788), using the vacuum resin infusion method, subjected to curing of the specimens to finally fragment them through laser cutting. Applying the Response Surfaces Methodology, the Minitab statistical analysis software was used in which the mechanical properties of the composite material were analyzed, using the Box-Behnken design in which we entered 3 input factors with 3 levels each: Orientation 1 (-45.0.45) degrees, Orientation 2 (-45.0.45) degrees and the temperature (60,90,120) degrees Celsius. In the design, the total number of samples to be obtained was indicated and later the respective treatments were carried out to execute the destructive mechanical tests of each case. These results were validated by complying with the parametric assumptions specified in the design. Through the ANOVA analysis of variance, the global analysis was determined with the best combination of the mechanical properties that interact in the process, which gave us values for orientation 1 of 23.18 degrees, orientation 2 of -10.45 degrees and a temperature of 60 degrees Celsius, also in the global optimization a desirability of 0.5173 was obtained.
  • Item type:Ítem,
    Propuesta de un plan de rehabilitación de la capa de rodadura de la vía Cunchibamba – San Andrés, desde el tramo km 4+400 hasta km 8+800 entre los cantones Ambato - Píllaro, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-01)
    Sánchez Núñez, Andrés Fernando
    ;
    Portilla Yandún, Favio Paúl
    Due to the conditions of the road, which presents problems and does not provide the necessary road safety for the adequate mobilization of its inhabitants, this plan is proposed to extend its useful life by means of road evaluation studies. To begin with, a georeferenced survey was obtained, using GPS, with a total of 324 points and a length of 4.4 kilometers using the CIVIL3D program. The TPDA was determined by a manual vehicle count during one week at an interval of twelve hours per day, classifying it as a Class II collector road. Soil samples were extracted and tested for granulometry, Atterberg limits, compaction test and CBR; obtaining a poorly graded sandy soil (SP) and silty sand (SM). In addition, with the CBR test it was concluded that the soil quality presented varied from "Fair" to "Good". The visual inspection was carried out using the PCI method, evaluating 18 sampling units, 5 of which were critical, resulting in a value of 32.51, which is a BAD pavement, requiring rehabilitation along the road. The non-destructive Benkelman Beam test was performed in 23 stations every 200 meters along the road, obtaining a TYPE III deflection, qualifying the subgrade as "GOOD" and the pavement as "BAD". Finally, it is considered to improve road safety by improving the quality of life of road users.
  • Item type:Ítem,
    Implementación del proceso de conservación de la estructura de la capa de rodadura de la vía Patate - Baños ABS 11+700 - 15+200 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09)
    Ortiz Sánchez, Johnny Sebastián
    ;
    López Arboleda, Alex Gustavo
    The Patate-Baños road is one of the very important arteries for the province of Tungurahua and the center of the country, since it serves as an outlet for agricultural and livestock products from the Patate canton, where 84 percent of its population lives in rural areas and are dedicated to the economic sector; in addition to functioning as an entry and exit of tourists to the Canton of Baños, where 90 percent of its economy depends on tourism; this is why the conservation of the tread layer is necessary so that there are no mobility complications. Through information gathering, field tests, laboratory tests, and bibliographic research, the characteristics of the road and the soil where it sits were achieved, based on which road maintenance was proposed. In the PCI tests, positive results were obtained, a value of 80.23 that means particularly good condition of the pavement, CBR with results of: excellent and good for subgrade, and Benkelman Beam with deflections below the admitted limits; gave values that indicated good behavior of the pavement and the subgrade. With these results, a road maintenance plan was proposed for the project road, both routine and periodic so that the road is preserved in the best possible condition and maintains the connection between both cantons.
  • Item type:Ítem,
    Implementación del proceso de conservación de la estructura de la capa de rodadura vía Camino Real sector Huachi Grande – Montalvo en el tramo de la abscisa 0+000 hasta la abscisa 4+000 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-06)
    Pérez Salinas, Andrés Benjamín
    ;
    Aldás Sánchez, Milton Rodrigo
    A country's roads are fundamental for its economic development, which is why governments have become aware of the need to develop and implement road conservation and maintenance plans to ensure that these roads fulfill the useful life for which they were designed. For develop the road maintenance plan for the section from abscissa 0+000 to 4+000 on the Camino Real Road in the Huachi Grande - Montalvo sector, a topographic survey, a traffic study, laboratory tests to obtain soil properties, and field tests to determine the surface and structural condition of the pavement and the bearing capacity of the subgrade were conducted. With the results obtained from the current and future traffic study, the road under study has the characteristics of a highway or AV1 multi-lane road, the type of soil found is clayey and silty gravel and sand (A-2-4 and A-2-6), with regular to good performance if used as subgrade (average CBR value of 9.83 percent), with good structural performance both in the subgrade and in the pavement, its deflection is type I, i.e. with a regular state of deterioration. Based on the results of the deflection (Benkelman Beam) and the Pavement Condition Index (PCI), the road maintenance plan is established, which consists of routine and periodic maintenance to preserve and maintain the structure of the wearing course for more years and avoid reconstruction before it reaches its useful life and causes dissatisfaction to users.
  • Item type:Ítem,
    Propuesta de reforzamiento de vigas de alma llena de puentes metálicos con fibra de carbono y resina epóxica
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022)
    Peña Jordán, Francisco Agustín
    ;
    Yunapanta Velasteguí, José Luis
    ;
    Guerra Avendaño, Oswaldo Marcelo
    Full web steel girders are used for vehicular bridges. These structural members are subjected to cyclic loading, which causes damage over time. The bridges are designed for a service life of at least 50 years, which is why they require maintenance, either for repair or repowering. An alternative is the reinforcement with carbon fiber and epoxy resin sheets. With the present research, a three-dimensional mathematical model was obtained that adjusts to the real behavior of beams composed of steel and concrete, reinforced with carbon fiber. The research was developed by applying real bending tests, and through finite elements in ANSYS RESEARCH - WORKBENCH software. The results between these tests of the composite beam were compared and a max difference of 4,8303 mm was obtained. The three-dimensional model obtained can be used to estimate the reinforcement of full web steel beams used in steel bridges.