Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 29
  • Item type:Ítem,
    Diseño, construcción y evaluación experimental de un prototipo de trituradora de botellas de vidrio para procesos de reciclaje
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-06)
    Buri Mendoza Edwin Fernando
    ;
    Núñez Núñez Diego Fernando
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica
    This technical project presents the design, construction, and experimental evaluation of a hammer type glass bottle crusher prototype aimed at supporting small and medium scale recycling operations. Given the critically low glass recycling rates across Latin America, a cost-effective mechanical solution was developed to reduce glass bottles into cullet with an average particle size of 4.77 mm. The crushing power was calculated using Bond's method, which determined the need for a 3 HP electric motor running at 1800 rpm with a nominal torque of 11.86 N·m. Key mechanical components including shafts, hammers, discs, and a belt driven transmission system were analytically dimensioned and validated through SolidWorks finite element simulations using Von Mises stress, displacement, and safety factor criteria. Material selection was technically driven: A36 steel with INDURA Overlay 60 abrasion-resistant coating for hammers, AISI 4340 steel for the secondary shaft, and AISI 1018 for the primary shaft. Experimental testing confirmed continuous operation over 8-hour shifts without jamming or motor overheating. Granulometric analysis showed that 70% of the crushed output met the target aperture of 4.77 mm, demonstrating effective size reduction for recycling applications. The resulting prototype is portable, economically viable, and easy to maintain, representing a practical solution for decentralized glass waste processing.
  • Item type:Ítem,
    Evaluación de las propiedades de la ceniza del carrizo como estabilizador de suelos
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-05)
    Paredes Tamayo Brando Josue
    ;
    Pérez Maldonado Ruth Lorena
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    This research analyzes the behavior of two sandy soils stabilized with reed ash, from the Patate (M1) and Mera (M2) cantons. The study aims to improve the soil's bearing capacity, as this property directly influences the performance and durability of road and civil infrastructure projects. The research sought to determine the influence of reed ash incorporation on the index and technical properties of both soils through laboratory tests. The experimental development was carried out in three phases: the first involved the collection and preparation of the reed ash; the second consisted of determining the index and mechanical properties of the soils in their natural state and stabilized with 4%, 8%, and 12% reed ash; and the third evaluated the technical, economic, and environmental viability of the resulting mixtures. The results showed similar behavior in both materials, due to their granular nature. Soil M1 was classified as SW according to the Unified Soil Classification System (USCS) and A-1 according to the American Society of Soil and Forestry Agents (AASHTO), while soil M2 was classified as SP and A-3. In both cases, the best performance was obtained with an 8% application of reed ash, achieving CBR values of 21.50% for M1 and 19.50% for M2, exceeding the natural values of 14.90% and 10.10%, respectively. These results demonstrate that reed ash significantly improves the properties of sandy soils.
  • Item type:Ítem,
    Evaluación de la Red Vial en el Área Urbana de la Parroquia Izamba de la Nueva Historia de Ambato, Comprendida en la Zona 31
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Tarco Laica Daysi Del Pilar
    ;
    Acosta Lozada Rodrigo Iván
    The road infrastructure of a city is essential for its economic and social development. In this context, studies were conducted that revealed the deterioration of the roads in the analyzed sector, compromising the safety and reliability of users. The analysis began with the determination of the Pavement Condition Index (PCI) for the roads in zone 31. Subsequently, the current and projected Average Annual Daily Traffic (AADT) was evaluated, complemented by tests such as natural moisture content, granulometry, Atterberg limits, Modified Proctor compaction, and California Bearing Ratio (CBR). Based on these results, a maintenance plan was proposed according to the identified damages. The study projected traffic over a 20-year period for the roads requiring intervention, including Ciro Peñaherrera Street, Pedro Vásconez Avenue, and Julio Castillo Street, with traffic volumes of 747, 2049, and 1166 vehicles, respectively. According to the MTOP 2003 classification, these roads are categorized as collector roads, which will help improve mobility in the surrounding areas. Soil tests indicated that the subgrade consists of high-quality clayey sand, providing a suitable base for road rehabilitation. Finally, the estimated cost to implement the maintenance plan amounts to 801,980 US dollars and 51 cents, which will enhance traffic conditions and extend the lifespan of the road infrastructure.
  • Item type:Ítem,
    Resistencia a la compresión del hormigón simple fabricado con agregado grueso reciclado y catalizador agotado de craqueo catalítico fluidizado
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Navas Vásconez, Daniela Sthefany
    ;
    Navarro Peñaherrera, Carlos Patricio
    Today, the construction industry is looking for more efficient, profitable and sustainable practices. This experimental study investigates the fabrication of plain concrete using recycled coarse aggregate (RCA) and spent fluidized catalytic cracking (FCC) catalyst, a byproduct of petroleum refining, to evaluate its compressive strength and viability as a sustainable alternative. This study combined theoretical and experimental approaches. The theoretical phase included an exhaustive review of the literature to establish testing methodologies. In the experimental phase, 45 concrete specimens with a strength of 240 kilograms/square centimeters were manufactured, using 100 percent recycled coarse aggregate (RCG) and different proportions in replacement of fine aggregate with spent fluidized catalytic cracking (FCC) catalyst.) at 5, 10, and 15 percent. These specimens were subjected to compression resistance tests at the ages of 7, 14 and 28 days in accordance with the NTE INEN-1573 regulations. Finally, the results showed that the replacement of 5, 10, and 15 percent FCC in replacement of fine aggregate, together with 100 percent AGR, did not improve the compressive strength of concrete compared to mixtures without FCC and did not reach the expected design strength for conventional concrete. This suggests that although the use of AGR and FCC can improve certain concrete properties, mixing proportions and methods need to be optimized to meet the required strength standards.
  • Item type:Ítem,
    Elaboración de concreto con adición de bagazo de café para incrementar su resistencia
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Amancha Zamora, Andrea Nicole
    ;
    Ramírez Cabrera, Wladimir José
    The decomposition of organic waste in landfills produces methane, a gas with a global warming potential 21 times greater than CO₂. Coffee bagasse (BC) is a significant organic waste in these landfills, so it is crucial to find a recycling solution to turn it into a valuable resource. The concrete industry can play an important role in increasing the recycling rate of this waste material. However, due to its high organic content, BC is not suitable for direct use in structural concrete. This research analyzed the pyrolysis of BC at different temperatures (350 and 349.50 degrees Celsius) to evaluate its suitability in improving the mechanical properties of concrete. Both raw and pyrolyzed forms of BC were used as replacements for fine aggregate (sand) in proportions of 5, 10 and 20 volume percent. Differential scanning calorimetry (DSC) analysis and compressive strength tests on concrete were performed to investigate the material properties and their behavior in concrete composites. The results show that the leaching of organic compounds from BC hinders the hydration reaction of cement particles, significantly affecting the compressive strength of concrete mixed with raw BC. However, pyrolysis of BC at 349.50 degrees Celsius markedly improved the material properties, resulting in a 22.39 percent increase in the compressive strength of concrete mixed with coffee biochar.
  • Item type:Ítem,
    Diseño geométrico y del pavimento de la vía Llangahua – Silipo – Pinllopata pertenecientes a las provincias de Tungurahua y Cotopaxi en el tramo km 8+000 – 12+000
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Saransig Velásquez, Wilmer Stalyn
    ;
    Moreira Cedeño, Fricson Lutgardo
    The road project addressing the connection between the Llangahua, Silipo, and Pinllopata communities, located in the provinces of Tungurahua and Cotopaxi, emerges in response to the identification of the need to establish a road connection. This approach aims to improve the living conditions of the inhabitants, reduce product transportation times, and foster social and economic development in the region. A rigorous topographic survey and soil studies were carried out, including Grain Size Analysis, Atterberg Limits, Modified Proctor, and CBR (California Bearing Ratio) analysis. The soil classification as non-plastic or low-plasticity clayey sand, along with a design CBR of 8.10 percent, laid the foundations for the planning of the pavement structure. Simultaneously, the traffic study determined a projected Design Traffic Volume (TPDA) of 94 vehicles/day for a 20-year design period, classifying the road as a Class IV Collector according to the regulations of MTOP 2003. The horizontal, vertical, and transverse design was adjusted in accordance with these regulations, ensuring its coherence with established parameters. Based on the information gathered about soil characteristics and traffic flow, the pavement structure was defined, considering effective thicknesses to ensure the functionality and safety of the road. Finally, as a result, the quantification of the work was carried out to obtain a reference budget for the technical project, providing a clear understanding of the necessary resources and facilitating precise planning for the execution of the proposal.
  • Item type:Ítem,
    Evaluación superficial y estructural del pavimento de la av. Pitágoras desde el redondel de Terremoto Km 0+000 hasta el caserío San Luis km 4+000 de la parroquia Picaihua del cantón Ambato provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Villegas Freire, Lucero del Belen
    ;
    Moreira Cedeño, Fricson Lutgardo
    The road infrastructure of a city is an indispensable part for the economic and social development, therefore, the respective studies were carried out, determining that the road of the sector under study is currently in poor condition, which affects the safety, stability and reliability of the user. For this purpose, we began with a study of the current and projected TPDA; subsequently, the PCI of 15 sample units was determined and the Benkelman Beam test was performed at 9 points; the following tests were also carried out: DCP, abrasion, granulometry, Atterberg limits and CBR. Finally, a maintenance plan was proposed by sections based on track damage. As a result, in 20 years the road will be classified as a class I collector with a projected TPDA of 4,976 vehicles/day. As for the PCI, it was determined that from the 0+000 to the 2+730 abscissa it is in poor condition, for this reason, rehabilitation was proposed; however, from the 2+730 to the 4+000 abscissa it is in good condition, therefore, it only requires maintenance. On the other hand, with the Benkelman beam, it was determined that the first section has type III deflection, while the second has type I deflection. On the other hand, with the aforementioned tests it was identified that the road is made up of a granular layer corresponding to a class 4 base and a subgrade made up of silty sand. Finally, the budget required for maintenance is US $507,274.55.
  • Item type:Ítem,
    Evaluación superficial y de la estructura del pavimento de la vía Pelileo – Guayaquil abscisa 4+580 – 9+160, ubicada entre los cantones Quero y Pelileo de la provincia de Tungurahua.
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Vaca Tobón, Esteban Nicholas
    ;
    Moreira Cedeño, Fricson Lutgardo
    The Pelileo – Guayaquil road holds significant importance as it is situated between two cantons, Quero and Pelileo, and plays a crucial role as a transportation artery. Currently, it exhibits deficiencies that adversely affect the quality of life for the residents in the area. By enhancing connectivity between these two urban centers, the road becomes a key axis for the efficient distribution of goods, directly contributing to trade and the economic dynamics of the region. A methodology combining both quantitative and qualitative approaches was employed, guided by ASTM, AASHTO, and MTOP standards, providing a more reliable focus and assurance of effectiveness to the study. Data on both surface and structural deficiencies were collected through laboratory and field studies, using methods such as TPDA, which revealed that the road exhibits characteristics of a Type I highway. The PCI indicated a poor condition, and granulometry and Atterberg limits identified it as composed of fine sand (A3) and Class 4 Base. Modified Proctor and CBR tests indicated that the bearing capacity of these materials falls within a good range of 19-26 and 80-85 percent, respectively. These data were essential for formulating a maintenance plan to address these deficiencies. The results underscored the need for road maintenance, ranging from routine upkeep to reconstruction. Laboratory studies aided in determining the road's composition, a factor considered to reduce construction costs.
  • Item type:Ítem,
    Diseño geométrico de la vía que une al sector Chilipata hasta el puente del sector Los Sauces, del cantón Patate, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Chico Lezano, Katheryn Vanessa
    ;
    Moya Medina, Dilon Germán
    Patate is a canton that belongs to the province of Tungurahua, the predominant economic activity is based on livestock, agriculture and commerce, to support the development of these sectors the canton needs roads that are in good condition and an alternative route that directly connects with the main avenue. To satisfy these needs, the proposed road from the Chilipata sector to the Los Sauces sector will provide security and fluid mobility. For this project, a topographic survey was developed with precision equipment. The vehicle volume count was carried out on a road adjacent to the project road during 12 hours a day, 7 days a week, and subsequently the road was designed with the help of an engineering program applying the regulations in force in the country MOP 2003. Finally, the relevant studies were carried out on the soil samples collected in the field, which were (moisture content, granulometry, attemberg limits, CBR, proctor) which helped in the design of the pavement structure by applying AASHTO 93 regulations. After carrying out preliminary studies, it has been found that the project area has an undulating relief, the road to be designed is classified as class I, and through soil studies it was identified that the area has silty sandy soil with a for which the structure of The asphalt layer is made up of a 5cm flexible running layer, a 15cm base layer and a 20cm base.
  • Item type:Ítem,
    Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Pinguilí-Rosal-Yanahurco en el tramo de la ABSCISA K4+000 a K8+000 perteneciente al cantón Mocha, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09)
    Oleas Córdova, Iván Moisés
    ;
    Aldás Sánchez, Milton Rodrigo
    Seeing and understanding that the section of road studied is not in an optimal state, thus hindering access, communication, and connectivity in the area, with this technical project we seek to propose a conservation plan for the structure of the layer rolling. For this, first, a georeferenced survey was carried out, using RTK, with this we determined the dimensions of the road, in addition to highlighting key points, such as ditches, storm sewers and other sections. Subsequently, a manual count and typing of the vehicles was carried out, a process that was carried out for a week in a period from 06:00 to 18:00, for the subsequent calculation of the TPDA. As a next step, we proceeded with the taking of soil samples, making test pits, which were excavated two for each kilometer of track studied, the material obtained was transferred to the laboratory to be later tested. A visual inspection of the road was carried out, a process with which we identified and classified the different types of damage existing in the surface layer to determine PCI. After that, the respective test was carried out with the Benkelman beam whose main objective is to determine the deflections of the pavement. With all the processes carried out previously, we came to establish that the road needs routine maintenance that will help prolong its useful life, helping to maintain in optimal condition such a vital heritage for the interconnection of the parishes.