Ingeniería Mecánica
Permanent URI for this collectionhttp://repositorio.uta.edu.ec/handle/123456789/900
Browse
5 results
Search Results
Item Estudio de aceites de corte alternativos para procesos de mecanizado criogénico(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-02) Cajas Lema, Patricio Hernán; Núñez Núñez, Diego FernandoThe project proposes to study alternative cutting oils for cryogenic machining processes with the general objective of improving surface quality in turning operations. Specialized literature on the use of different types of oils as cutting fluids was used; options available in the local market were identified, determining the physical properties through laboratory tests; turning tests were performed, comparing the behavior of the oils by measuring surface roughness; the null hypothesis was rejected, confirming that the type of oil used has a significant impact on the surface finish during the turning process of AISI 304 steel; the effectiveness of the system (MQL) and of cryogenic fluid CO2 was highlighted; the laboratory tests allowed the identification of key physical properties of the oils, such as densities, density and surface roughness; laboratory tests allowed the identification of key physical properties of the oils, such as densities, viscosities and flash points, providing solid basis for the selection of cutting fluids; the comparison between different oils revealed remarkable differences in their thermal and tribological behavior, the combination of MQL with olive oil, CO2 and titanium dioxide nanoparticles proved to be highly effective, not only improving the surface quality but also optimizing the tribological performance and prolonging the cutting tool life. These results suggest the feasibility of this combination in specific machining applications. As a result, this project contributes significantly to the knowledge on the selection and application of cutting fluids in cryogenic machining processes, providing a valuable basis for future research and improvements in the efficiency and quality of turning operations.Keywords: Machining, oils, cooling, turning, cryogenic, cutting fluid.Item Transformación de una válvula termostática en una válvula regulada electrónicamente mediante el control de la temperatura del elemento termostático. aplicación al estudio del comportamiento estático y dinámico de un ciclo simple de refrigeración(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2019) Quinatoa Quinatoa, Keny Javier; García del Valle, JavierThe research work focused on the transformation of a conventional thermostatic expansion valve (TXV), into an electronically regulated valve by controlling the temperature in the bulb and the design of a thermostatic expansion valve prototype, in order to provide with an expansion device that could be able to match the performance of a commercial expansion valve. Their behavior was studied through a static and dynamic study in a simple refrigeration system. For which, an analysis was made by means of comparison of experimental data against a mathematical model of the refrigeration bench. The mathematical model was programmed to predict the behavior of the cooling system and thus determine the optimal operating conditions. The idea is to maintain the degree of superheating at the outlet of the evaporator regardless of the operating conditions of the cooling system. This is obtained by resistances that surround the bulb of the thermostatic expansion valve. The data computed by the mathematical model was validated with the experimental data measured in the refrigeration bench. Once the results have been analyzed and compared, it is determined that it is possible to control degree of superhating at the evaporator outlet accurately.Item Diseño y construcción de una válvula de expansión controlada electrónicamente, para la regulación del recalentamiento a la salida del evaporador de una instalación frigorífica(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2016) Chacón Avilés, Oscar Alexander; García del Valle, JavierThis project is based on the design, construction and testing of an electronically controlled thermostatic expansion valve used to regulate the superheat at the evaporator outlet in a cooling system. This refrigeration system consists of a prototype working with R404A, designed in order to analyze the dynamic behavior of expansion valves. This study also covers the construction of the experimental setup. From a theoretical point of view, heat transfer in the various components of the system was studied in order to determine the operating point of the installation. In addition, the expansion valve inner sectional area was estimated in order to be coupled with the compressor-operating curve. The results of the present study compare the overheating vs. time, evaporator pressure vs. time and temperature evaporator vs. time of expansion valve and the electronically controlled valve. Based on those results it has been concluded that the electronically controlled valve properly regulates the overheating at the evaporator outlet, although the valve setup and control algorithm need to be improved.Item Estudio de sistemas de pulido de probetas metalográficas y su incidencia en la calidad de pulido en el Laboratorio de Materiales de la Carrera de Ingeniería Mecánica de la Universidad Técnica de Ambato(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2014-04) Merino Freire, Christian Renato; Espín Lagos, Segundo ManuelEl actual trabajo muestra la investigación realizada al proceso de pulido de probetas metalográficas en el Laboratorio de Materiales de la Carrera de Ingeniería Mecánica, orientado principalmente al acabado que se da a una probeta, como es el caso de la calidad del pulido previo al análisis metalográfico. Para desarrollar esta investigación se utilizó técnicas e instrumentos, aplicando métodos para la recolección de información de los diferentes sistemas de pulido, tales como fichas de observación, hojas de campo y cuaderno de notas, llegando a soluciones como son: realizar simultáneamente el pulido de 4 probetas, aportando al desarrollo de prácticas de laboratorio de materiales disminuyendo tiempos de prácticas metalográficas. Como parte favorecida se encuentra la Facultad de Ingeniería Civil y Mecánica, carrera de Ingeniería Mecánica, especialmente los estudiantes de esta, ya que contarán con un equipo nuevo para realizar prácticas de materiales, en las que intervenga el proceso de pulido de probetas metalográficas.Item Estudio de un banco de pruebas de refrigeración y su aplicación en sistemas agroindustriales en la Carrera de Ingeniería Mecánica de la Universidad Técnica de Ambato(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2011) Velasco Bautista, Marco Alejandro; Moretta Marfetán, Alejandro O.El Banco de Pruebas de Refrigeración como se encontró no contaba con los aditamentos necesarios para poder utilizarlo. La utilización de las herramientas disponibles para el desarrollo de la investigación permitió el cumplimiento de los objetivos planteados. El Banco de pruebas de Refrigeración una vez realizado la Repotenciación y Automatización, el mismo que es capaz de controlar la temperatura del evaporador mediante un control digital de temperatura, la presión del refrigerante tanto en el lado de alta como el de baja indicado por los manómetros. Además de lo anteriormente descrito, el Banco de Pruebas Repotenciado y Automatizado permite desarrollar simulación de fallas que se ocasionan en sistemas de refrigeración industrial reales para dar una noción básica a los estudiantes de cómo funcionan este tipo de sistemas; siempre cuidando al compresor, el mismo que tiene sus respectivas protecciones.