Aplicación de la Electrocultura en el cultivo de Lechuga (Lactuca sativa)
No Thumbnail Available
Date
2024-08
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The present investigation was carried out on the premises of the Unamuncho sector of the
Ambato canton, province of Tungurahua, with the purpose of applying Electroculture in
Lettuce (Lactuca sativa), using antennas made manually with copper wire material and
galvanized aluminum wire. . A randomized complete block design was carried out with
five treatments in three repetitions. To record data, they were obtained using a DBCA and
with the Tukey test at 5%, observing the following variables: Height of the plant at the
time of harvest (cm), chlorophyll and nitrogen content, days to harvest, weight of cabbage
at harvest, diameter of cabbage at harvest, electrical conductivity of the soil, recording
the following results: The treatments carried out in the research project M1A1, M1A2
(copper wire) and M2A1, M2A1 (galvanized aluminum wire) They are very effective
compared to the Witness who has had a poor performance. In plant height, the treatment
that stood out the most was M1A2, with a height of 18.04 cm; In the weight of cabbage,
the treatment that stood out the most was M1A2, with a weight of 1341.67 g; In the
diameter of the cabbage at harvest, the treatment that stood out was M1A2, with a
diameter of 19.13 cm; In the chlorophyll content, it was found that the M1A1 treatment,
with an average of 24.95, was the one that stands out the most of all the treatments and
the control; In the nitrogen content, M1A1 stood out the most, with an average of 8.03;
With respect to the electrical conductivity of the soil, it was obtained that treatments
M1A1 and M1A2 have an average of 30.28, treatments M2A1 and M2A2 had an average
of 32.61 and the Control had an average of 21.14.
Description
La presente investigación fue realizada en los predios del sector de Unamuncho del cantón
Ambato, provincia de Tungurahua, con el propósito de aplicar la Electrocultura en la
Lechuga (Lactuca sativa), utilizando antenas realizadas manualmente con material de
alambre de cobre y alambre de aluminio galvanizado. Se realizó un diseño de bloques
completos al azar con cinco tratamientos en tres repeticiones. Para el registro de datos
fueron obtenidos mediante un DBCA y con la prueba de Tukey al 5%, observando las
siguientes variables: Altura de la planta en el momento de la cosecha (cm), contenido de
clorofila y nitrógeno, días a la cosecha, peso del repollo a la cosecha, diámetro del repollo
a la cosecha, conductividad eléctrica del suelo, registrando los siguientes resultados: Los
tratamientos realizados en el proyecto de investigación M1A1, M1A2 (alambre de cobre)
y M2A1, M2A1 (alambre de aluminio galvanizado) son muy efectivas a comparación del
Testigo que ha tenido un bajo rendimiento. En la altura de planta el tratamiento que más
destacó fue M1A2, con una altura de 18.04 cm; en el peso del repollo el tratamiento que
más destacó fue M1A2, con un peso de 1341.67 g; en el diámetro del repollo a la cosecha
el tratamiento que sobresalió fue M1A2, con un diámetro de 19.13 cm; en el contenido
de clorofila se obtuvo que el tratamiento M1A1, con un promedio de 24.95, fue el que
más destaca de todos los tratamientos y del testigo; en el contenido de nitrógeno el que
más sobresalió M1A1, con un promedio de 8.03; con respecto a la conductividad eléctrica
del suelo se obtuvo que los tratamientos M1A1 y M1A2 tienen un promedio de 30.28, los
tratamientos M2A1y M2A2 estuvieron con un promedio de 32.61 y el Testigo con un
promedio de 21.14.
Keywords
AGRONOMÍA, LECHUGA (Lactuca sativa), LECHUGA, (Lactuca sativa), CULTIVO, ELECTROCULTURA, CLOROFILA