Levantamiento de información para la acreditación según la norma NTE INEN-ISO/IEC 17025:2018 del laboratorio de investigación de mecánica (LIM UTA) para el ensayo físico de inflamabilidad según la norma ISO 3795
No Thumbnail Available
Date
2023-08
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
The gathering of information for the accreditation of the “Laboratorio de Investigación
Mecánica” (LIM UTA) is carried out since the laboratory is not an accredited entity,
so it needs to meet a series of requirements to guarantee the verification of the method
and the validity of the results tested in the tests.
The curricular integration work, technical project, started with the induction to the
platform of the “Servicio de Acreditación Ecuatoriano” (SAE), which led us to analyze
all the necessary documents to start the accreditation process. One of these documents
resulted in the completion of a questionnaire based on the NTE INEN ISO/IEC
17025:2018 Standard, with which the requirements that the laboratory must comply
with through an internal audit were reviewed and evaluated; to proceed to issue the
respective report that involves the identified non-conformities. The non-conformities
and opportunities for improvement were raised to end with the closing report of the
internal audit. In order to create missing documents or update them to proceed with
the update of the master list and upload the required documents in the SISAC system.
Finally, the purchase of the SISAC system was made, which allows us to obtain the
license to manage said system. The specific approach is to make the application for
accreditation, where we will upload the documents from the master list thus waiting
for verification that the application is complete, giving us the receipt of the date for
the IN SITU evaluation, longing for accreditation.
Description
El levantamiento de información para la acreditación del Laboratorio de Investigación
Mecánica (LIM UTA) se lleva a cabo ya que el laboratorio no es un ente acreditado
por lo que necesita cumplir una serie de requisitos para garantizar la verificación del
método y la validez de los resultados efectuados en los ensayos.
El trabajo de integración curricular, proyecto técnico, partió con la inducción a la
plataforma del Servicio de Acreditación Ecuatoriano (SAE), lo que nos llevó a analizar
todos los documentos necesarios para comenzar con el proceso de acreditación. Uno
de estos documentos se derivó en la realización de un cuestionario basado en la Norma
NTE INEN ISO/IEC 17025:2018, con el cual se revisó y evaluó los requisitos que el
laboratorio debe cumplir por medio de una auditoría interna; para proceder a emitir el
informe respectivo que involucra las no conformidades identificadas. Se levantaron
las no conformidades y oportunidades de mejora para finalizar con el acta de cierre de
la auditoría interna. Con el propósito de crear documentos faltantes o actualizarlos para
proceder con la actualización de la lista maestra y subir los documentos requeridos en
el sistema SISAC.
Finalmente se realizó la compra del sistema SISAC, el cual nos permite obtener la
licencia para el manejo de dicho sistema. El planteamiento específico es realizar la
solicitud para la acreditación, donde cargaremos los documentos de la lista maestra así
esperando la verificación de que la solicitud está completa, brindándonos la recepción
de la fecha para la evaluación IN SITU, anhelando la acreditación.
Keywords
AUDITORÍA INTERNA, SAE, SISAC, NO CONFORMIDADES, IN SITU