Estudio del módulo de elasticidad estático del hormigón en base a su resistencia a la compresión fabricado con materiales de las minas: mora ubicada en el cantón Ambato provincia de Tungurahua y Cantera Volcán ubicada en el cantón Baños provincia de Tungurahua
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
It is necessary for the calculator to be able to know with certainty the value of the
modulus of elasticity of the concrete that has to be elaborated with the materials of the
area, the selected mines, provide in great quantity the stone aggregate used in the
construction in the province of Tungurahua, Therefore, defining the modulus of
elasticity of the concrete made with these aggregates is a great contribution to society,
since the values obtained represent a reliable and safe source.
The characterization tests of the aggregates allowed to adapt an appropriate and
personalized dosage by means of the optimal density method, in the elaboration of
cylindrical test specimens for resistances of 210 and 280 kg/square centimeters at 28
days of age according to the ASTM C-469 standard.
Based on the previous results, the ka and kb factors were determined for light and
normal weight concrete, respectively, values that vary significantly from those
proposed by the A.C.I. 318 and A.C.I. 363. These new values will be used to calculate
a real modulus of static elasticity of concrete, which will ultimately be reflected in the
optimization and reduction of uncertainties in the design of structures to be built with
the two mines.
Description
Es necesario para el calculista poder conocer con certeza el valor del módulo de
elasticidad del hormigón que se ha de elaborar con los materiales de la zona, las minas
seleccionadas, proporcionan en gran cantidad el agregado pétreo utilizado en la
construcción en la provincia de Tungurahua, por lo que definir el módulo de elasticidad
de los hormigones elaborados con estos agregados resulta un gran aporte a la sociedad
ya que los valores obtenidos representan una fuente confiable y segura.
Se realizaron los ensayos de caracterización de los agregados permitieron adaptar una
dosificación apropiada y personalizada mediante el método de la densidad óptima, en
la elaboración de probetas cilíndricas de ensayo para resistencias de 210 y 280
kg/centímetros cuadrados a los 28 días de edad conforme la normativa ASTM C-469.
En función a los resultados previos, se determinaron los factores ka y kb para
hormigones ligeros y de peso normal respectivamente, valores que varían
significativamente de los propuestos por los códigos A.C.I. 318 y A.C.I. 363. Estos
valores nuevos servirán para calcular un módulo de elasticidad estático de hormigones
real, finalmente se reflejará en la optimización y la reducción de incertidumbres en el
diseño de estructuras que vayan a construirse con las dos minas.
Keywords
MÓDULO DE ELASTICIDAD, AGREGADOS, ÁRIDOS, RESISTENCIA A LA COMPRESIÓN, MINA MORA, CANTERA VOLCÁN, ENSAYOS DE CARACTERIZACIÓN