Ciencia e Ingeniería en Alimentos y Biotecnología

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/412

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 11
  • Item type:Ítem,
    Cuantificación simultanea de conservantes y cafeína en bebidas azucaradas consumidas por los moradores de la provincia de Tungurahua, por espectroscopia ultravioleta
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2022-03)
    Verdesoto Martínez, Solange Monserrath
    ;
    Pérez Aldas, Lander Vinicio
    Energy drinks such as Monster Energy and 220V, which contribute to increased energy, physical performance and a better mental state of the people who consume it, on the other hand, Coca-Cola light is a carbonated drink made up of sugar in the form of monosaccharides and added caffeine that stimulates the nervous system; In order to preserve the properties and nutritional value of the drink, preservatives such as sorbic acid and benzoic acid are used, recognized by the CODEX192 standard as additives that inhibit the formation of bacteria, molds and yeasts. The concentrations of both preservatives and caffeine in the mentioned beverages were determined, for which a method validated by UV-VIS spectrophotometry was used, the respective absorbances were measured and due to the matrix effect the addition of standard was used, where it was obtained that sorbic acid is present in the three drinks, but with a higher quantity in Monster since it has 46,778 mg-Kg, benzoic acid mostly in 220V 34,415 mg-kg compared to the other drinks, on the other hand, caffeine also It is part of the composition of the three samples, mostly in Monster with 274.276 mg-kg, followed by 220V with 251.017 mg-kg and finally Coca-Cola Light with 40.448 mg-kg. All concentrations are within the ranges established by the CODEX192 and NTE-INEN regulations, however, excessive consumption can cause health problems, therefore, it is recommended not to exceed the daily intake established based on your body weight.
  • Item type:Ítem,
    Determinación de edulcorantes por espectrofotometría visible en bebidas azucaradas consumidas en la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2022-03)
    Salinas Lara, Anthony Daniel
    ;
    Pérez Aldas, Lander Vinicio
    As sugar-sweetened beverages are considered a product of mass consumption, their components must be controlled, in this case synthetic sweeteners, which are food additives that must comply with regulations in their concentrations so that the food is not harmful to their consumers. The present investigation was oriented to determine the amount of synthetic sweeteners in the most consumed sugary drinks in the province of Tungurahua, such a selection took as a reference the research project called Tax Policy and the consumption of sugary drinks in Ecuador that was executed in the FCAUD In addition, a bibliographic comparison was made with the chromatographic technique to guarantee the reliability of the results obtained. The determination of the concentration of sweeteners in sugary drinks was carried out by means of spectrophotometry, supported by the research project of Castillo (2022), the results were 112.03 mg per liter for aspartame, 59.71 mg per liter for acesulfame and 85.83 mg per liter for sucralose. The experimental values did not present as much discrepancy with the chromatographic bibliographic values. Compliance with the CODEX STAN 192-1995 standard was verified since the concentrations of synthetic sweeteners in sugar-sweetened beverages presented values lower than those established as the maximum dose, which ensures that these beverages are effective and safe for human consumption.
  • Item type:Ítem,
    Validación del método de cuantificación simultánea de conservantes y cafeína presentes en bebidas azucaradas por espectroscopía ultravioleta en la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2022-03)
    Ojeda Armijos, Segundo Javier
    ;
    Pérez Aldas, Lander Vinicio
    Sorbic acid and benzoic acid are used as preservatives, in order to avoid the presence of microorganisms in sugary drinks. Instead, caffeine acts on the nervous system, which is why it is used as a stimulant. However, the excessive use of preservatives and caffeine in sugary drinks can cause health problems in consumers, so it is important to know the concentrations present in the samples of Coca Cola Light, 220V and Monster, which must be within the values established by the NTE INEN-CODEX 192, INEN 1101 and INEN 2411 standards. The validation of the spectrophotometric method was carried out in the LACONAL laboratory, using the 60S EVOLUTION equipment, implementing the standard addition method, preparation of calibration curves and application of analytical parameters such as precision, repeatability, reproducibility, accuracy, linear range, working range and sensitivity detailed in the Eurachem guide. The analytical parameters had the acceptance criteria, through the application of the Fisher and t-Student test, the percentage Absolute Error, the Relative Error and the Horwitz CV. Finally, the uncertainty of: repeatability and reproducibility, the verification of the spectrophotometric equipment, these uncertainty values allow the combined uncertainty calculation, which is used to obtain the expanded uncertainty where the maximum value was more less 2, 49 mg for ml. A maximum value of the percentage of expanded uncertainty of 5.77, was obtained, which is less than the established 30 percent.
  • Item type:Ítem,
    Validación del método analítico por espectrofotometría uv-vis para la determinación de edulcorantes en bebidas azucaradas consumidos en la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2022-03)
    Castillo Mayorga, Alison Abigail
    ;
    Pérez Aldas, Lander Vinicio
    The present research focuses on the validation of the calibration curves of the UV Vis spectrophotometry analysis method for the detection of synthetic sweeteners of sucralose, aspartame and acesulfame K, the study is aimed at possible applications in sugary drinks. For the analysis, standard solutions were prepared with buffer and chromophore solutions in known concentrations. The study was carried out in a UV Vis Thermo Scientific Evolution 60S series spectrophotometer. The calibration curves were made with the proposed concentrations for each standard solution with which the value of R squared was determined, in all cases it was greater than 99 percent, in turn, the equations of calibration for each solution. A statistically significant linearity was determined for the process and a sensitivity of 0.0252; 0.0018 and 0.2332 for sucralose, aspartame and acesulfame K. The detection limit calculated for each standard solution corresponds to 0.0547, 0.0249 microgram per milliliter and 0.0459 milligram per milliliter for sucralose, aspartame, and acesulfame K, respectively; the calculated expanded uncertainty was between 7.44, 19.08 and 21.5 percent for sucralose, aspartame and acesulfame K, respectively. In turn, through a bibliographic review, it was possible to determine that HPLC chromatography is a method for detecting high precision synthetic sweeteners with very sensitive detection limits, however, spectrophotometry is also a good option for this type of analysis that presents a great sensitivity.
  • Item type:Ítem,
    Validación del método para determinación de detergentes en muestras de agua por espectrofotometría UV-Vis en el laboratorio AqLab de la ciudad del Coca
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2022-03)
    Aguirre Tubón, Ana Belén
    ;
    Pérez Aldas, Lander Vinicio
    The validation of the method for determination of surfactants in water samples by UV-vis spectrophotometry was carried out in the environmental analysis and evaluation laboratory Aqlab in the city of Coca. Its validation was carried out taking into account the analytical need of the laboratory, validation parameters of the INEN ISO IEC 17025 standard and SAE regulations, environmental regulations described in the TULSMA, in its Environmental Quality and Effluent Discharge Standard: Water Resource and the Municipal Ordinances of the Orellana Canton. The method 5540 C corresponding to the determination of anionic surfactants as MBAS described in the Standard Methods was used for the matrices of water for human consumption, natural water and waste water. The validation objectives were established and the corresponding experimental design was proposed under conditions of repeatability and reproducibility. The following parameters were analyzed: Response Function, Limit of detection, Limit of quantification, Precision (repeatability and reproducibility), Veracity, Uncertainty and Working Interval of the method. Through the statistical analysis of data, it was demonstrated that the method is suitable for the intended application, by meeting the validation objectives set for a CVr and CVR less than 30 percent for accuracy, a recovery percentage of 80 to 120 percent for veracity, an uncertainty U less than 30 percent with a 95 percent confidence interval (k is 2) and a method working range comprising concentration levels 0,10 to 8,85 ppm MBAS.
  • Item type:Ítem,
    Cuantificación de ácidos grasos de aceites comestibles reutilizados en la elaboración de alimentos en la ciudad de Ambato por cromatografía de gases con detector de espectrometría de masas
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2021-01)
    Guachamín Zambrano, Patricio Wladimir
    ;
    Pérez Aldas, Lander Vinicio
    Fatty acids are an elemental source of energy for the human body, it is for this reason that their consumption and use is of vital importance for a healthy diet. However, the consumption of foods prepared with oils exposed to several periods of reuse triggers the acquisition of cardiovascular diseases such as diabetes and obesity. To know the state of degradation of the fatty acids present in oil samples from the city of Ambato, we sought to validate and implement a methodology for the quantification of the main fatty acids: palmitic, oleic stearic and linoleic in samples of reused oils. The validation and quantification process of the fatty acids was carried out by means of gas chromatography coupled with mass spectrophotometry. The parameters of sensitivity, linearity, detection limit and quantification were analyzed, where results were obtained within the permissible limits to validate the analytical method, in addition, the uncertainty of the analytical method was determined for the precision and accuracy parameters, obtaining a range application of the method that limits the error in measurements. At the same time, a completely random block experimental design was carried out using a one-factor anova to statistically verify that there was not significant difference in the measurements. Finally, a comparison was made of the concentration of fatty acids with samples of unused commercial oils, obtaining results that reflect samples with an advanced state of degradation.
  • Item type:Ítem,
    Determinación de clorofila A como indicador de polución en los embalses de las hidroeléctricas Agoyán y Pisayambo por el método espectrofotométrico UV visible
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2021-01)
    Alvares Pérez, José Diego
    ;
    Pérez Aldas, Lander Vinicio
    This project was carried out with the aim of evaluating a pollution method, determining the concentration of chlorophyll A, using the UV-visible spectrophotometric method, because this factor directly influences the contamination of the Agoyán and Pisayambo reservoirs, which have not been thoroughly studied to date and due to the industrial waste, that flows into them, are highly harmed. These bodies of water serve as irrigation in the crops of the surrounding communities and feed natural slopes, transporting a high level of contaminants. These will help reduce the environmental impact caused on these hydroelectric plants, for which it is first necessary to identify a method to study chlorophyll A and its impact on the above-mentioned reservoirs. For this, in situ parameters such as Temperature, pH, Secchi disc and pressure, as well as dissolved oxygen, which together with chlorophyll help evaluate the trofic status of these dams were analyzed. This study was conducted in conjunction with graduate students, who determined other variables such as organic matter, nitrates, and phosphates. This was able to identify that there are significant differences in pollution between these hydroelectric plants, as Agoyan has a eutrophic level and Pisayambo a mesotrophic state. Since Agoyan is limited by the textile area of Pelileo, the agricultural area of Patate, the camal of Baños and other pollution factors typical of the place, unlike Pisayambo, whose anthropogenic activities are limited, due to the low accessibility, reducing the aforementioned factors.
  • Item type:Ítem,
    Validación del método para la determinación de material particulado PM-10 y PM-2,5 en aire ambiente
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería Bioquímica, 2019-01)
    Tituaña Quillupangui, Carlos Andrés
    ;
    Pérez Aldas, Lánder Vinicio
    At present, particulate matter (PM) air pollution is caused by industrial processes; as well as, by the excessive increase of the automotive park, which increased the problem in the health of the people and the quality of the ambient air. Studies have found that the particulate material with the highest index of influence in health conditions are PM-2.5 and PM-10. For the application of measurement methodology is guaranteed by the application of reference methods internationally validated by recognized institutions such as the Environmental Protection Agency of the United States and verified by accredited laboratories according to standards such as 17025. The validation criteria determined values uncertainty required for verification obtaining values for PM-2.5 of 17.01 percent and PM-10 8.55 percent, these being acceptable ranges proposed for the validation of the method, similarly determining the quality air on the campus of the Technical University of Ambato for PM-2.5 was 16.78 ug for each cubic meter and for PM-10 was 63.35 ug for each cubic meter, these being accepted as the guidelines established in the Text results Unified Environmental Legislation, Annex 4 of Book VI, Official Register No. 387 of 2015. The results establish that, at the Technical University of Ambato, its air quality is Good quality and the concentrations of these parameters do not affect the health of people due to the incidence of particulate matter in air.
  • Item type:Ítem,
    Validación de métodos analíticos para la determinación de la demanda química de oxígeno (rango bajo, rango medio, rango alto), sólidos totales disueltos y sólidos totales suspendidos en matrices de agua clara y residual en el Centro de Investigaciones y Oontrol Ambiental CICAM
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería Bioquímica, 2014)
    Jácome Yánez, Juan Andrés
    ;
    Calle Naranjo, Galo Mauricio
    Es importante realizar la validación de los métodos que se efectúan en los laboratorios de ensayo o calibración para poder conocer las limitaciones y aplicabilidad de los protocolos empleados, ya sean estos normalizados o no, con el fin de adaptar los procedimientos al entorno y actividades desempeñadas en la rutina del análisis. La investigación se realizó en el Centro de Investigación y Control Ambiental (CICAM) como parte de su proceso de acreditación. Se validó el método de análisis de Demanda Química de Oxígeno (DQO) en sus tres rangos de trabajo, rango bajo (LR) el cual tiene límites de trabajo desde 9 mg/L hasta 150 mg/L de O 2 , con una incertidumbre de 29% y coeficientes de repetibilidad y reproducibilidad menores al 15%. El rango medio (MR) desde 100 mg/L hasta 1500 mg/L de O 2 con una incertidumbre de 9% y coeficientes de variación por repetibilidad y reproducibilidad menor al 5%. El rango alto (HR) cuyo rango nivel de trabajo es desde 1000 mg/L hasta 15000 mg/L de O 2 con una incertidumbre expandida de 5,76% y coeficientes de variación por repetibilidad y reproducibilidad también menores al 5%.Los resultados de la validación del método de Sólidos Totales Disueltos son: Rango de 30 mg/L hasta 1000 mg/L de STD con una incertidumbre expandida de 1,56% y coeficientes de repetibilidad y reproducibilidad de 3,5% y 3,18%. Para el método de Sólidos Totales Suspendidos el rango de trabajo validado fue de 5 mg/L hasta 150 mg/L de STS con una incertidumbre expandida de 2,73% y coeficientes igual a CV r = 5,88% y CV R = 5,69%.
  • Item type:Ítem,
    Validación de un método para análisis de arsénico en agua potable por absorción atómica mediante generación de hidruros
    (Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería Bioquímica, 2014)
    Tafur Yépez, Christian David
    ;
    Pacheco Tigsilema, María Teresa
    Se validó un método para determinación de arsénico en agua potable por la metodología de absorción atómica con generadores de hidruros; la validación comienza desde la calibración del equipo alineando el haz de luz de la lámpara en la celda de cuarzo. El reactivo clave para la determinación es el borohidruro de sodio que permite la reducción de As 5 a As 3 para mejorar la detección, la reacción debe darse en un medio ácido por lo que se inyecta ácido HCl 3M al generador de hidruros. Es necesario revisar la presión de los gases acetileno que este la llama a unos 200°C y el gas inerte argón que esté a unos 2 L/min; la longitud de onda a la que se mide es de 193,7 nm con una potencia en la lámpara de 8,0 mA. La preparación de los estándares se realizó a partir de un patrón puro de As disuelto en HNO 3 de concentración 1000 mg/L con 100% de pureza, realizando las respectivas diluciones desde 4 ppb hasta 60 ppb. Se aplicó un diseño experimental no probabilístico, empleando la muestra de referencia CRM de la empresa ERA con 9,78 ppb de concentración certificada y el protocolo señalado por el fabricante del equipo. Se determinó los parámetros de validación obteniendo resultados estadísticos favorables de linealidad con un coeficiente de correlación de 0,9997, un error en la calibración de 0,00247, incertidumbre de calibración de 0,35, incertidumbre expandida de 18,63%. Los resultados del límite de detección son de 4,49 ppb, el límite de cuantificación de 5,244 ppb, el porcentaje de coeficiente de variación de repetibilidad promedio es de 2,65%, el porcentaje de coeficiente de variación de reproducibilidad es de 2,69%, la exactitud se determinó con la muestra de referencia (MCR) con el sesgo y una prueba de t de student de dos colas se concluyó que no existe una diferencia significativa entre la lectura en el equipo y la concentración certificada por el MCR. Con la determinación de la certidumbre se puede concluir que el método esta validado con una incertidumbre expandida de ±18,63%. El análisis de varianza basado en la prueba ANOVA de Fisher demostró que todos los datos están dentro del límite de aceptación.