Ciencia e Ingeniería en Alimentos y Biotecnología
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/412
Examinar
8 resultados
Resultados de la búsqueda
Item type:Ítem, Desarrollo de un bioplástico a partir de harina de maíz negro (Zea mays L.)(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Alimentos, 2024-02) ;Vargas Vivanco, María BelénMoreno Toasa, Gabriel AlejandroThe present research project aims to develop from black corn flour (Zea mays L.) to offer to the industry innovative bioproducts based on the reduction of the environmental impact in situ that synthetic plastics do not. The experimental design determined that it is possible to produce bioplastics and that they have good physical, mechanical, optical and biodegradation characteristics to similar conventional synthetic plastics (black plant transplant sleeves) based on low density polyethylene (LDPE). The results obtained in the different analyses show that the bioplastics have a thickness of 0.5 mm, moisture content of 15 percent, resistance to deformation of 26 N, water vapor permeability of approximately 1 gram, millimeters, hours to minus one, centimeters to minus 2, pascals to minus 1, solubility of 18 percent, water resistance of 48 hours, high luminosity and brightness, transparency of 26 percent and high biodegradation in less than 30 days. On the other hand, the development of bioplastics from black corn flour on an industrial scale does not require special machinery, due to the use of plastic molds, and temperature for drying. Finally, bioplastics are shown to be an ecological alternative to reduce the excessive plastic waste pollution existing on our planet.Item type:Ítem, Desarrollo de biopelículas degradables a partir de harina de fruta de pan (Artocarpus altilis)(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Alimentos, 2024-02) ;Galarza Sanabria, Inés AbigailMoreno Toasa, Gabriel AlejandroResearch on the development of degradable biofilms from breadfruit flour (Artocarpus altilis) is of crucial importance in the current context of environmental concern and sustainability. With the growing problem of plastic pollution, biofilms offer a promising and eco-friendly alternative. Breadfruit flour, an abundant natural source, is presented as a valuable resource for the manufacture of these biodegradable films, providing a sustainable solution to mitigate the negative environmental impact of conventional plastics. Regarding the methodology, the process of developing biofilms from breadfruit flour involves the extraction and processing of the flour to obtain the appropriate components. The resulting mixture is used to form biodegradable films using specific techniques. The research addresses the optimization of these processes with the use of glycerol as a natural plasticizer, evaluating properties such as mechanical resistance, degradability and barrier capacity of biofilms. The research highlights the success in obtaining degradable biofilms using breadfruit flour and glycerol that exhibit adequate mechanical and barrier properties, suggesting their potential application in packaging and similar products. Furthermore, the degradability of biofilms opens the door to more sustainable solutions to the problem of plastic waste. Taken together, the results support the feasibility and importance of using breadfruit flour in biofilm manufacturing as a promising alternative in the fight against plastic pollution.Item type:Ítem, Biomateriales obtenidos por fermentación para su aplicación como envase y empaque de productos cárnicos crudos(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería en Alimentos, 2022-03) ;Sampedro González, Tatiana SamanthaChico Terán, Mayra FernandaPlastic pollution is bringing major environmental problems in different areas. Among the main demanders of synthetic plastic is the industry of containers and packaging used for food packaging. There has been a great interest from researchers and industries to replace common plastic with bioplastics and biomaterials derived from renewable resources. The objective of this research is to perform a bibliographic review of the biomaterials obtained by fermentation for their application as containers and packaging for raw meat products. Biomaterials certified as biodegradable and biobased can be obtained directly from residual biomass from agroindustrial processes through fermentation by microorganisms, thus economizing the production process. The major representatives of bio-based and biodegradable biopolymers are PLA (polylactic acid) and PHB (polyhydroxybutyrate) because they have physical, chemical and mechanical properties similar to the synthetic plastics used in the packaging of raw meat. These biomaterials are obtained by fermentation by bacteria using different carbon sources such as corn, molasses or sugar cane bagasse, whey, fruit peel, among others. These foods are perishable and easily spoiled due to their high water and nutrient content. The use of PLA and PHB films is a viable alternative to respond to one of the biggest challenges in the food industry, which is the extension of shelf life while maintaining the microbiological and sensory quality of meats, since these packages can provide antioxidant and antimicrobial properties to the product.Item type:Ítem, Utilización de cáscaras de plátano (Musa spp), en el desarrollo de películas biodegradables(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2020-01) ;Viteri Herrera, José AndrésArancibia Soria, Mirari YosuneBiodegradable films were made from banana peel (Musa spp.), an underutilized agro-industrial residue. The influence of the concentration of peel flour (0.5; 1.0; 1.5) percent, glycerol (1 and 1.5) percent and the amount poured (0.31 and 0.47) gram for cm2 was evaluated in the properties of the films made. The higher the concentration of peel flour and the amount poured, the greater opacity of the films due to a greater presence of fibre. Likewise, when the concentration of peel flour was increased, the films showed higher values of solubility and water resistance, as well as the increase in glycerol concentration increased the flexibility, solubility and water resistance of the material. The films produced had a degradation time of 30 days. Lastly, the possible application of the films in food was evaluated, for this a sensory analysis of bird muscle covered with the films was performed, obtaining a good acceptance.Item type:Ítem, Evaluación de la actividad nematicida in-vivo de compuestos activos difundidos en una matriz polimérica frente a Meloidogyne(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería Bioquímica, 2020-01) ;Salinas Pérez, Ximena EstefaníaArancibia Soria, Mirari YosuneKidney tomatoes in Ecuador are of the utmost importance, however, profitability has been declining due to different factors, including the presence of the Meloidogyne nematode causing the phytosanitary problem "radical nodules." Faced with this problem, it is necessary to seek less polluting alternatives with low environmental impact, among which the use of natural plant compounds is included, since the antimicrobial and insecticidal activity of many of its volatile compounds, especially essential oils, has been demonstrated. The present investigation was based on evaluating in vivo the nematicidal effect of three essential oils: Bursera graveolens, Minthostachys mollis, Origanum vulgare diffused in a polymer matrix (biodegradable agricultural bags), the same which were made using the bilayer molding or casting technique, with 1.5 percent w / v glycerol in the first layer and 4 percent v / v of each essential oil in the second layer. The best results for nematicidal activity were obtained between week 2 and 3 after sowing. The essential oil that presented the greatest nematicidal activity was palo santo, followed by oregano, while muña type was the least effective against Meloidogyne, it was also observed that the distance at which the sampling was performed was not a significant factor. Although the nematicidal effect of the oils was observed during week 4, this was lower. Based on the results obtained, the use of polymeric matrices could be an alternative for the management of Meloidogyne instead of synthetic nematicides.Item type:Ítem, Caracterización reológica de suspensiones elaboradas a partir de harina y residuos de banano de rechazo(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería en Alimentos., 2017-01) ;Lalaleo Córdova, Diana JimenaArancibia Soria, Mirari YosuneThe valuable nutritional and functional properties of banana flour and the residues generated during its production have made the industry to turn them into a byproduct with important application. However, it is necessary to characterize the materials to identify their potential use. In this sense, the present study characterized the banana flours of pulp, pulp-peel and peel based on their proximal composition, functional, thermal and microstructure properties. Suspensions were also developed from the flours obtained and their rheological behavior was determined. The fiber content present in the peel flour (10 percent - 13.7 percent), influenced some functional properties such as solubility, swelling factor, water holding capacity and the gelatinization temperature of starch. Also, fiber and starch had a significant effect on rheological characteristics. Flours with high starch contents behaved as a structured and elastic fluid with gelling properties, while flours with high fiber content showed a characteristic behavior of a less structured gel. After adjustment to the rheological models, it was determined that the suspensions made with banana flour have a pseudoplastic behavior, which was satisfactorily adjusted with the power law model.Item type:Ítem, Estudio de las propiedades fisicoquímicas y funcionales de la harina de banano (Musa acuminata AAA) de rechazo en el desarrollo de películas biodegradables.(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería en Alimentos., 2016-04) ;Ortega Alvardo, Johana ElizabethEcheverría, IgnacioThis work is about physicochemical and functional characterization of flour of banana (Musa acuminata AAA) for rejection and Cavendish cultivate, it made with banana from two provinces (Los Rios & El Oro) the highest producers of Ecuador. On this study was evaluated the effect of production zone, husk incorporation and use of sodium metabisulfite, getting 8 treatments with a yield between 21.16 por ciento and 29.85 por ciento.Inside the physicochemical properties of banana flour evaluated, the whiteness index was influenced by the use of metabisulfite, obtaining values between 56.91 to 76.49; the highest values were the flour with metabisulfite. Also was evaluated total content of starch, amylose and crude fiber in flours, resulting ranges from 67.48 to 78.21 por ciento, 12.82 to 17.98 por ciento and 1.15 to 3.50 por ciento respectively. These contents influenced mainly in the functional properties of banana flour at 80 Celsius degree. The optical properties of the biodegradable films show variation in parameters such as the whiteness index (57.05 to 77.72), yellowness index (11.66 to 81.06) and color difference (9.75 to 49.17); obtaining films with a higher whiteness index in treatments using sodium metabisulfite and a differential color and yellowness index highest for treatments without metabisulfite due to enzymatic browning. The mechanical properties, such as puncture force and puncture distance of biodegradable films showed a range of values between 15.32 to 25.97 N and 10.42 to 13.60 mm respectively, greater resistance was observed in treatments with high fiber. Samples with higher puncture distance were those that had a low fiber content and high starch content. As puncture force, barrier properties as permeability to water vapor (3,16 x10-10 – 6,89 x10-10 g•m-1•s-1•Pa-1) and solubility (50.53 to 60.02 percent).Item type:Ítem, Utilización de harina de plátano (musa balbisiana), en el desarrollo de películas biodegradables activas(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería en Alimentos, 2015) ;Moreno Toasa, Gabriel AlejandroArancibia Soria, Mirari Yosune
