Ingeniería en Sistemas, Electrónica e Industrial

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Estudio de tiempos y movimientos en el área de producción de juguetes caninos a base de carnaza de la empresa Soguar S.A.
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-02)
    Toapanta Guangasi, Danny Javier
    ;
    Ortiz Sailema, Christian Ismael
    The companies involved in the production of dog bones made from rawhide face critical challenges associated with excessive waste generation in their processes. Therefore, this research project has conducted a time and motion study in the rawhide-based canine toy production area of SOGUAR S.A. with the aim of improving production processes. The study began with the collection of information about the current situation of the company through direct observation and interviews with the general manager and production area operators. After an initial diagnosis of the company, an ABC analysis was conducted using the 2022 sales history to identify the product with the highest demand. Products with item numbers 6153 and 6910, were selected as the primary focus of the study, representing 32.45% of accumulated revenue. The production line consists of 19 processes, for which analytical flowcharts were created to provide a detailed analysis of the item's path. Time measurements were taken using the zero-return method. Subsequently, the standard time was calculated, resulting in 89.09 seconds/unit for item 6153 and 89.43 seconds/unit for item 6910. Production capacity was then calculated for each process, determining the bottleneck in the packing process. As a proposed improvement, the addition of an employee to the packing process activities is suggested. A comparative analysis for one day, one week, and one month was conducted, achieving a 50% improvement in capacity by employing two operators, thereby mitigating the bottleneck. Through the proposed methodology, 17 non-value-adding activities were identified in the packing area for both study products. Implementing the improvement proposal optimized the production process by 18.18% for item 6153 and 8.77% for item 6910. Finally, the standardization of the work method was established through work instructions.
  • Item type:Ítem,
    Estudio de tiempos y movimientos para mejorar el proceso de producción de la empresa CEPESA
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2020-01)
    Domínguez Castro, Diego Andrés
    ;
    Tigre Ortega, Franklin Geovanny
    El presente estudio busca a través del estudio de tiempos y movimientos, la estandarización de los procesos productivos en la fabricación de asientos tipo estándar interprovinciales en la empresa CEPESA “Cepeda Estructuras y Asientos”, además de la identificación del cuello de botella que más genere retraso en el sistema, con el fin de proponer mejoras considerables en el proceso. A través de visitas a la empresa en estudio, se realiza la elección del producto y modelo con mayor demanda mediante la metodología ABC, con el fin de analizar el proceso productivo del modelo más vendido en la empresa. El diagrama de operación y recorrido, cursograma analítico, entre otros, fueron algunas de las principales herramientas utilizadas en el estudio del proceso de las diferentes áreas involucradas. Asimismo, con la ayuda del estudio de tiempos se define las actividades de cada área y los elementos que componen cada una de ellas, además de la maquinaria, herramientas y materiales necesarios para cada actividad del modelo elegido para la investigación, determinando la eficiencia actual por área, el cuello de botella del proceso y posibles oportunidades de mejora como la aplicación del balanceo de líneas y la creación de nuevos métodos de trabajo. Con el estudio realizado, se definió el tiempo estándar para cada una de las actividades en la fabricación del asiento tipo interprovincial y se consiguió un comportamiento adecuado del tiempo, según la demanda que la empresa sufre, disminuyendo los tiempos en las áreas que sufren retrasos considerables como el ensamblaje total y acabados. Para la primera área en mención, anteriormente se obtenía una unidad cada 41,00 minutos, con el estudio propuesto se obtendría dos unidades cada 42,19 minutos. Asimismo, en el área de acabados se redujo el tiempo de fabricación para un lote de 20 unidades de 482,25 minutos a 401,61 minutos De esta manera se mejoraría la eficiencia en mano de obra del 71,56% a 89,08% en líneas generales de proceso, disminuyendo así, tiempos muertos de operación. ABSTRACT The present study seeks through the study of times and movements, the standardization of production processes in the manufacture of interprovincial standard type seats in the CEPESA company "Cepeda Estructuras y Asientos", in addition to the identification of the system bottleneck, with in order to propose considerable improvements in the process. Through visits to the company under study, the choice of the product and model with the highest demand is made through the ABC methodology, in order to analyze the production process of the model considered star in the company. The operation and route diagram, analytical course, among others, were some of the main tools used in the study of the process of the different areas involved. Likewise, with the help of the study of time, the activities of each area and the elements that make up each of them are defined, in addition to the machinery, tools and materials necessary for each activity of the model chosen for the investigation, determining the current efficiency by area, the bottleneck of the process and possible opportunities for improvement such as the application of line balancing and the creation of new working methods. With the study carried out, the standard time for each of the activities in the manufacture of the interprovincial seat was defined and adequate time behavior was achieved, according to the demand that the company suffers, reducing the times in the areas that suffer considerable delays as the total assembly and finishes. For the first area mentioned, one unit was previously obtained every 41,00 minutes, with the proposed study two units would be obtained every 42,19 minutes. Likewise, in the area of finishes the manufacturing time for a batch of 20 units from 482,25 minutes to 401,61 minutes was reduced. This would improve labor efficiency from 71,56% to 89,08% in general process lines, thus decreasing downtime of operation.