Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
15 resultados
Resultados de la búsqueda
Item type:Ítem, Plataforma de realidad virtual para la rehabilitación de lesiones músculo – esqueléticas y respiratorias: un estudio piloto en un entorno clínico(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Telecomunicaciones., 2026-07-03) ;Eugenio Arias, María Belén ;Manzano Villafuerte, Víctor SantiagoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Telecomunicaciones.REALIDAD VIRTUAL, REHABILITACIÓN MÚSCULO-ESQUELÉTICA, REHABILITACIÓN RESPIRATORIA, SENSOR INERCIAL, VISIÓN COMPUTACIONAL, GAMIFICACIÓN, ADULTOS MAYORES. This research addressed the development and validation of a virtual reality (VR)platform for the rehabilitation of musculoskeletal and respiratory conditions in older adults, implemented as a pilot study at the Universidad Técnica de Ambato. Conventional rehabilitation programs show low adherence due to their repetitive nature, limited feedback, and access barriers for patients with reduced mobility. To address this, the system integrates immersive VR environments with gamification and real-time physiological monitoring. Developed in Unity 6 for the Meta Quest 3 headset, the platform includes three threedimensional scenarios modeled in Blender where patients perform exercises guided by a virtual avatar. The respiratory module RespMon uses an MPU6050 sensor mounted on a diaphragmatic band with an ESP32-C3 microcontroller, transmitting via BLE the inhalation and exhalation times, I:E ratio, and apnea events. The musculoskeletal module ROMAnalyzer applies computer vision with MediaPipe Pose to estimate joint angles of the upper and lower limbs using a mobile device camera. Validation with twenty older adult patients and three rehabilitation specialists confirmed the clinical viability of the system. RespMon recorded an average respiratory rate of 13.6 rpm within the expected physiological range and an approximate battery life of 3 hours per charge. ROMAnalyzer detected joint asymmetries of up to 46.60° in shoulder flexion and 43.28° in elbow flexion, values consistent with individual diagnoses. Patient satisfaction reached 4.48/5 and specialist assessment 4.75/5, supporting the platform as a functional, motivating, and scalable therapeutic tool for older adult rehabilitation.Item type:Ítem, Aplicación con entorno virtual inmersivo para la simulación de una unidad de cuidados intensivos (UCI) como apoyo al proceso de enseñanza en la Carrera de Enfermería de la Universidad Técnica de Ambato.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software, 2026-07-03) ;Medina Vasco, Gabriel Leonardo ;Ibarra Torres, Oscar FernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de SoftwareThe present research project implements an immersive virtual environment based on Virtual Reality for the simulation and recognition of an Intensive Care Unit, aimed at Nursing students from the Universidad Técnica de Ambato. The problem lies in the limited physical availability of specialized laboratories, which restricts students' prior technical familiarization with medical equipment. Methodologically, the research adopts a quantitative and qualitative approach, under an applied and field modality, collecting primary data at the Faculty of Health Sciences to coordinate the construction of a digital ecosystem through the Extreme Programming (XP) agile framework. The system comprises a web management platform in React, a server in NestJS with PostgreSQL, and a three-dimensional interactive simulator coded in Unity and C# for Meta Quest 3 standalone hardware. The results demonstrate a 100% level of graphical and morphological fidelity in the modeling of the 25 essential biomedical assets validated by expert judgment. Additionally, the usability evaluation using the standardized SUS scale applied to students reflects an outstanding acceptance index, where 9 out of 10 users confirm the ease of learning and consistency of the wireless environment. It is concluded that the interactive simulator eliminates motion sickness caused by image lag, reduces visual improvisation, and provides a functional educational tool that endows students with confidence for optimal placement in real clinical practice.Item type:Ítem, Aplicación de realidad virtual para evaluación de fundamentos técnicos de Tae Kwon Do.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software, 2026-07-03) ;Jurado Gonzalez, Adrian Israel ;Buenaño Valencia, Edwin HernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de SoftwareThis degree project addresses the development of a virtual reality application for the assessment of Taekwondo technical fundamentals at Villalba’s Tigers Academy. The research is framed within the project “Innovative Training System Based on Virtual Reality and Generative Artificial Intelligence as a Factor for Technical, Psychological, and Intercultural Performance in University Students of Zone 3”, approved through Resolution No. UTA-CONIN-2025-0405-R. The proposed solution is an immersive tool designed to complement traditional teaching methods and support the evaluation of technical performance. The methodology combined bibliographic research, surveys conducted with 33 students, and interviews with 3 instructors, resulting in a total population of 36 participants. The results showed that 81.8% of participants consider it important to identify technical mistakes, 93.9% value separating training sessions into punching and kicking techniques, and 90.9% would recommend a Taekwondo VR application. The interviews confirmed that basic techniques are essential and that technology can support technique correction without replacing the instructor. Eight fundamental techniques were classified: two punching techniques, Jirugi and Palgup Chigi, and six kicking techniques, Ap Chagi, Dollyo Chagi, Yop Chagi, Naeryo Chagi, Bandal Chagi, and Mireo Chagi. For the development process, the IID Development methodology, Unreal Engine, HTC Vive 3.0, Blender, NestJS, and PostgreSQL were selected. The application integrated user authentication, technique selection, a guide avatar, Full Body Tracking, motion comparison, feedback, and performance history features. Expert validation considered five dimensions and fifteen evaluation criteria, achieving a score of 3.78/5.00, corresponding to a “Good” level. The results demonstrate a functional solution, although recommendations were identified regarding the physical training space and the tracking system.Item type:Ítem, Aplicación de realidad virtual para evaluación de fundamentos técnicos de Tae Kwon Do.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software, 2026-07-03) ;Moreira Sarcos, Josue Sebastian ;Buenaño Valencia, Edwin HernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de SoftwareThis degree project addresses the development of a virtual reality application for the assessment of Taekwondo technical fundamentals at Villalba’s Tigers Academy. The research is framed within the project “Innovative Training System Based on Virtual Reality and Generative Artificial Intelligence as a Factor for Technical, Psychological, and Intercultural Performance in University Students of Zone 3”, approved through Resolution No. UTA-CONIN-2025-0405-R. The proposed solution is an immersive tool designed to complement traditional teaching methods and support the evaluation of technical performance. The methodology combined bibliographic research, surveys conducted with 33 students, and interviews with 3 instructors, resulting in a total population of 36 participants. The results showed that 81.8% of participants consider it important to identify technical mistakes, 93.9% value separating training sessions into punching and kicking techniques, and 90.9% would recommend a Taekwondo VR application. The interviews confirmed that basic techniques are essential and that technology can support technique correction without replacing the instructor. Eight fundamental techniques were classified: two punching techniques, Jirugi and Palgup Chigi, and six kicking techniques, Ap Chagi, Dollyo Chagi, Yop Chagi, Naeryo Chagi, Bandal Chagi, and Mireo Chagi. For the development process, the IID Development methodology, Unreal Engine, HTC Vive 3.0, Blender, NestJS, and PostgreSQL were selected. The application integrated user authentication, technique selection, a guide avatar, Full Body Tracking, motion comparison, feedback, and performance history features. Expert validation considered five dimensions and fifteen evaluation criteria, achieving a score of 3.78/5.00, corresponding to a “Good” level. The results demonstrate a functional solution, although recommendations were identified regarding the physical training space and the tracking systemItem type:Ítem, Sistema integrado de realidad virtual para la rehabilitación funcional Post-Artroplastia de cadera.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Telecomunicaciones., 2026-01) ;Pérez Moscoso Michael Steven ;Robalino Peña, Edgar FreddyUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Telecomunicaciones.This project addresses the critical issues of low patient motivation and the lack of objective monitoring in post-operative hip arthroplasty rehabilitation, which often leads to prolonged recovery times and functional risks, particularly within the context of limited clinical capacity in Tungurahua. The primary objective was to develop an Integrated Virtual Reality (VR) System utilizing Inertial Measurement Units (IMUs) to optimize physical therapy, thereby enhancing patient adherence and facilitating continuous progress tracking through a tele-rehabilitation platform. The methodology centered on Applied Research for the development of a functional system. The Unity 3D engine was used to create an interactive VR environment that delivers personalized therapeutic exercises. The hardware was designed and optimized using an ESP32 C3 Super Mini board and MPU6050 sensors integrated into a custom PCB and a 3D-printed casing, ensuring compact sensorization. Real-time communication between the sensors and the virtual environment was successfully managed via the SlimeVR Server, guaranteeing accurate motion capture and transmission for immediate biofeedback. The results demonstrate a system capable of delivering interactive and personalized exercises, providing the physiotherapist with the ability to monitor progress in real-time and overcome the limitations of traditional methods. The system validates the potential of Biomedical Engineering by effectively adapting Virtual Reality technology to clinical rehabilitation. This project establishes a foundation for more effective and motivating recovery, fostering interdisciplinary collaboration between engineering and health sciences in the creation of Digital Rehabilitation Platforms.Item type:Ítem, Aplicación con realidad virtual para gestión de usuarios y prácticas de escenarios quirúrgicos en enfermería(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software., 2026-01) ;Oviedo Sánchez, Bryan Steven ;Ibarra Torres, Oscar FernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software.Clinical practice in surgical environments requires controlled conditions and specialized resources that are not always available in nursing laboratories. To address this need, a virtual reality system was implemented focused on user management and progress tracking within simulated surgical scenarios. The project allows for student registration, session management, progress saving, and performance evaluation in procedures based on real surgical times. The solution was developed using Unity, C#, and MetaQuest 3 devices, integrating an optimized backend with REST APIs to handle authentication, roles, and results storage. Through the analysis of technical and functional requirements, the necessary architecture was defined to ensure a fluid, secure, and adaptable experience for educational clinical environments. Subsequently, modules for user management, time-based simulation, Mayo stand setup, and automated reporting were built, allowing for the measurement of errors, times, and completed stages. The system's usability was evaluated using the TAM model with nursing students and faculty. Students showed high acceptance, with average scores of 4.74 for Perceived Usefulness, 4.38 for Ease of Use, 4.65 for Attitude Toward Use, and 4.75 for Intention to Use. Instructors registered even higher scores—4.97, 4.91, 4.98, and 4.98, respectively—confirming that the system is relevant, easy to use, and suitable for integration into clinical educational settings.Item type:Ítem, Sistema de realidad virtual dedicado a la identificación y armado del instrumental quirúrgico para estudiantes de enfermería(2025-08) ;Sánchez Sandoval Anderson Daniel ;Saquinga Chango Kevin Alexander ;Ibarra Torres Oscar FernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de SoftwareLimitations in clinical laboratory infrastructure hinder practical training in surgical instrumentation for nursing students. In response, a virtual reality system was developed that simulates open surgical environments, allowing students to identify instruments and practice setting up the Mayo table in procedures such as cesarean sections and appendectomies. An immersive experience in simulated surgical environments was achieved through an application developed in Unity with C# and run on Meta Quest 3 glasses. The system was designed with an iterative and user-centered approach, applying the Extreme Programming (XP) methodology. To evaluate the complexity and efficiency of the development, a proprietary methodology was created that integrated metrics such as Cyclomatic Complexity, Halstead Complexity, real-time performance, and user experience evaluation through the NASA-TLX and SUS instruments. The validation of this methodology was carried out under the Design Science Research approach, which allowed the evaluation process to be scientifically structured. The results show that 93% of students rated the system as useful or very useful for identifying instruments, and 86.2% indicated that it facilitates practice outside the laboratory. In addition, the TAM questionnaire applied to eight experts yielded averages of 4.8 in perceived usefulness, 4.45 in ease of use, 4.67 in attitude toward use, and 4.75 in intention to adopt on a 5-point Likert scale. In future phases, it will incorporate a user management system with attendance control and progress resumption.Item type:Ítem, Entorno virtual inmersivo para la optimización del entrenamiento en inspección ocular técnica de los peritos de criminalística de La Dirección Nacional de Investigación Técnico Científica Policial(2025-08) ;Ilbay Rodríguez Sebastián ;Nogales Portero Rubén EduardoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de SoftwareThe forensic experts of the Criminalistics Unit of the Dirección Nacional de Investigación Técnica Científica Policial face challenges in their practical training on crime scene examination, a crucial procedure for the proper processing of crime scenes. This issue arises because the only physical facility equipped for this type of training is located in the Distrito Metropolitano de Quito, creating logistical and economic barriers for those in other areas of the country. In response to this issue, the present research proposes the development of an immersive virtual environment aimed at enhancing crime scene examination training for the forensic experts of the aforementioned institution. The solution was developed using the Godot Engine video game engine and Blender 3D modeling software. It is designed to run on Meta Quest virtual reality devices, thereby providing an immersive, interactive, and realistic experience. As a result, the system is fully autonomous and independent of other platforms, which facilitates its implementation without requiring additional technological infrastructure. This feature enables the decentralization of training and supports its potential nationwide expansion. Validation carried out by criminalistics experts yielded a favorable assessment of the system’s usefulness in professional training. Additionally, a notable increase in the overall acceptance of immersive technologies was observed, rising from 3.97 to 4.21 on a 5-point scale.Item type:Ítem, Plataforma para el entrenamiento de estudiantes de enfermería en la técnica de toma de signos vitales aplicando realidad virtual(2025-07) ;Monge Roque Alexander Josue ;Manzano Villafuerte Víctor SantiagoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de TelecomunicacionesThe present project addressed the creation of a virtual reality platform for training nursing students in the vital signs measurement technique, seeking to innovate pedagogical methods and offer a safe environment to develop practical skills, overcoming traditional limitations. Implementation involved the 3D modeling of essential clinical instruments and the construction of a simulated scenario, leveraging free and open-source tools such as Blender for modeling and Unity for programming, which allowed maintaining initial software costs at zero. The only significant expenditures were the acquisition of HTC Vive Pro 2 headsets and a high-end computer, essential for ensuring an immersive experience. The simulator's validation consisted of subjecting the platform to evaluation by nursing students through practical tests and a survey, confirming with satisfaction that the results were highly positive, as they perceived the platform as an extremely instructive and effective tool for their training.Item type:Ítem, Entorno virtual para el entrenamiento de la conexión de motores trifásicos y monofásicos para el aprendizaje a estudiantes de la Carrera de Ingeniería Industrial de la FISEI-UTA.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Software, 2025-02) ;Alvear Vaca Kevin AndresJara Moya Santiago DavidCurrently, virtual reality has become a key tool in education, enabling students to interact with complex concepts in a practical and immersive way. This thesis aims to enhance the learning process for students in the Industrial Engineering program at the Technical University of Ambato, specifically those enrolled in the subject of Electrical Machines. The development of the virtual environment utilized advanced technological tools, employing the SUM methodology, which is specifically designed for video game projects. Unity was used as the main development engine, complemented by Blender for 3D design, to create an interactive and realistic environment. The integration of Meta Quest 2 virtual reality glasses with OpenXR ensured cross-platform compatibility and facilitated the development process. The validation of the virtual environment was conducted through an experiment involving a control group and an experimental group. The results showed that the use of the virtual environment significantly improved the students’ learning experience, demonstrating its effectiveness as a complementary tool to traditional teaching methods in the subject of Electrical Machines.
