Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
15 resultados
Resultados de la búsqueda
Item type:Ítem, Análisis de las propiedades físico-mecánicas y resistencia de los suelos con la incorporación de la ceniza de hoja de bambú(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Santamaria Chávez Franklin Alexis ;Ortiz Montero Santiago AndrésUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe present research aimed to evaluate the physical-mechanical properties and the strength of two types of soil through the incorporation of bamboo leaf ash (BLA) in proportions of 4 %, 5 %, and 6 %. Two soils of different origin were analyzed: one extracted from the city of Ambato, classified as clayey sand (SC), and another from Santa Clara, classified as silt of medium-low plasticity (ML). The study was carried out in three phases: the characterization of the soils in their natural state, the incorporation of ash in the three indicated proportions, and the technical comparison of the results to determine the optimum proportion of addition. Tests of moisture content, particle-size analysis, Atterberg limits, standard Proctor, and CBR were performed. With the ash, the CBR of both soils increased. That of Ambato rose from 7.90 % to 15.40 % with 5 % ash, and that of Santa Clara from 2.58 % to 5.40 % with 4 %. In the Ambato soil, the behavior became non-plastic upon adding 4 % ash, whereas in the Santa Clara soil the plasticity decreased as each proportion was added. It was concluded that the optimum percentage of ash depends on the type of soil.Item type:Ítem, Análisis experimental de la estabilización de suelos arenosos del sector La Libertad de Huachi Grande mediante la adición de cal, cemento y ceniza de totora: evaluación de propiedades físicas y mecánicas y su aplicación en infraestructura vial(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Altamirano Villacís Katherin Ibeth ;Acosta Lozada Rodrigo IvánUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis research evaluates the effect of adding totora reeds as an alternative stabilizer for improving sandy soil intended for road subgrades and compares its performance with the results of stabilization using lime and cement. The study arises from the need to develop sustainable alternatives that overcome dependence on conventional materials and evaluate innovative and environmentally responsible solutions with a construction approach that allows for the development of more efficient infrastructure aligned with environmental sustainability criteria. The experimental work was developed based on the physical and mechanical characterization of the soil in the La Libertad sector of the Huachi Grande parish. It was determined that the soil corresponds to a poorly graded sand (SP) according to the Unified Soil Classification System (USCS) and to a granular material type A-3 according to the American Association of State Highway and Transportation Resources (AASHTO) system. Regarding the mechanical properties, a CBR of 14.40% was obtained, classifying it as a fair subgrade. Subsequently, the physical and mechanical properties of the soils were evaluated with additions of 5%, 10%, and 15% lime, cement, and cattail ash. The results showed that all three stabilizers improved the soil's bearing capacity, reaching a maximum CBR value of 240.00% with the 15% cement addition, while lime reached a maximum value of 62.40% with a 10% dosage. Cattail ash achieved a maximum CBR of 24.10% with a 10% ash content. Finally, the technical and economic feasibility analysis concluded that totora ash is the best alternative for stabilizing the subgrade of sandy soils, since according to the CBR value it is determined to be a very good subgrade, while stabilization with lime and cement results in a good and very good base, which are considered oversized for the established objective of stabilizing the subgrade, and the cost is high compared to that of stabilization with totora ash.Item type:Ítem, Análisis comparativo de las propiedades físico-mecánicas y la resistencia de suelos de la costa y sierra, estabilizados con ceniza de caña de bambú al 2%, 3% y 5%.(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Yánez Barrionuevo Dayana Mercedes ;Bayas Altamirano Myriam MarisolUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe objective of this research was to evaluate the physical and mechanical properties and the strength of two types of soil through the incorporation of bamboo cane ash (CCB) in proportions of 2%, 3%, and 5%. Two soils of different origin were analyzed: one taken from Santo Domingo, in the coastal region (M1), classified as clayey sand (SC, A-6), and another from San Bartolomé de Pinllo, Ambato, in the highland region (M2), also classified as clayey sand (SC, A-2-4). The study was carried out in three phases: characterization of the soils in their natural state, incorporation of ash at the three indicated percentages, and technical comparison of the results. Moisture content, particle-size analysis, Atterberg limits, standard Proctor, and CBR tests were performed, and the ash composition was determined by X-ray fluorescence (XRF). XRF revealed an ash dominated by potassium, with little silica and almost no calcium, which does not meet the requirements for a pozzolan (ASTM C618). With the ash, the plasticity index of both soils decreased, but the CBR dropped sharply: that of Santo Domingo fell from 6.21% to 1.12% with 5% CCB, and that of San Bartolomé from 15.66% to 2.01%, with losses greater than 80%. It was concluded that, under the conditions tested, bamboo cane ash (CCB) is not an effective stabilizer for these soils, since it acts as an inert filler that reduces their bearing capacity.Item type:Ítem, Influencia de la ceniza de cáscara de Musa paradisiaca (plátano verde) en la mejora de las propiedades físicas y mecánicas de los suelos para estabilización(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01) ;Criollo Camacho Jonathan Daniel ;Pérez Maldonado Ruth LorenaUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis research evaluated the potential of Musa paradisiaca peel ash (MPPA) as a sustainable stabilizing agent for improving the geotechnical performance of road subgrades in Ecuador. The study was motivated by the need to identify cost-effective and environmentally friendly alternatives for enhancing soils with limited bearing capacity. Two soils with contrasting characteristics were analyzed: a poorly graded silty sand (SP-SM, A-2-5) obtained from Quisapincha and a highly plastic silt (MH, A-7-5) collected from San José. The methodology included the physical and mechanical characterization of the natural soils, followed by the evaluation of mixtures containing 4%, 8%, and 12% MPPA. Laboratory testing comprised grain size analysis, Atterberg limits, Modified Proctor compaction, and California Bearing Ratio (CBR) tests. The results indicated that an 8% MPPA content was the optimum dosage for both soils. In the Quisapincha soil (M1), the CBR increased from 13.80% to 23.00%, representing a 66.7% improvement in bearing capacity. In the San José soil (M2), the CBR increased from 7.15% to 16.30%, corresponding to a 127.97% improvement. Furthermore, the plasticity index decreased from 14.25% to 9.74%, indicating enhanced soil stability. The findings demonstrate that MPPA is an efficient, economical, and environmentally sustainable alternative for soil stabilization. Its incorporation significantly improves the geotechnical properties of both granular and fine-grained soils, increasing their suitability for road infrastructure applications, with more pronounced benefits observed in fine-grained soilsItem type:Ítem, Evaluación de la capacidad de la ceniza de aserrín en diferentes porcentajes como estabilizador de suelos(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01) ;Panimboza Rosero Edison Sebastián ;Pérez Maldonado Ruth LorenaUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis study evaluated soil stabilization through the incorporation of sawdust ash as a sustainable alternative for improving the physical and mechanical properties of soils. For this purpose, two soil samples collected from Cevallos canton, located in Tungurahua Province, Ecuador, were analyzed. Sample M1, extracted from the Aire Libre neighborhood, a consolidated area of the canton, was classified as silty sand, whereas sample M2, obtained from the Andignato rural settlement, a non-consolidated area, was classified as sandy silt. Both samples were subjected to an experimental program that included moisture content, grain size distribution, specific gravity, Atterberg limits, Modified Proctor, and California Bearing Ratio (CBR) tests, under natural conditions and with SDA additions of 5%, 10%, and 15%. The results obtained demonstrated favorable effects derived from the incorporation of SDA. In sample M1, the addition of 10% SDA increased the CBR value from 18.00% to 29.80%. Likewise, sample M2 showed significant improvements in CBR compared to the untreated soil, increasing from 5.70% to 16.90%. These results indicate considerable enhancement in the bearing capacity of both soil samples. Consequently, the findings confirm that SDA constitutes an efficient soil stabilizer due to its ability to reduce soil plasticity and increase internal friction between particles, thereby promoting better compaction and improving the load-bearing capacity of the material.Item type:Ítem, Evaluación de la resistencia de la ceniza de los residuos de choclo como estabilizador de suelos(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-06-30) ;Pérez Buenaño Leslie Julissa ;López Arboleda Alex GustavoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilTo reduce the environmental impact of traditional stabilization, the technical feasibility of corn cob ash (CCA) was evaluated. Through XRF, the CCA (calcined at >400°C, with a 77.5% yield) showed potassium (32.03%) and phosphorus (7.89%), which reduce plasticity, as well as silicon, magnesium, and calcium, which generate cementitious compounds. The objective was to verify whether CCA optimizes the physical-mechanical behavior and bearing capacity of the soil, promoting the valorization of agro-industrial waste. Two soil samples were collected from Ecuador: Amazon/Oriente (S1) and Highlands/Sierra (S2). Their physical and mechanical properties (moisture content, Atterberg limits, modified Proctor, and CBR) were evaluated by comparing a control sample against three variations with 2.0%, 2.5%, and 3.5% CCA substitution. The tests demonstrated physical-mechanical improvements in both soils upon incorporating CCA. Regarding consistency, the dosages (2.0% to 3.5%) reduced the liquid limit (LL) and increased the plastic limit (PL), thereby decreasing the plasticity index (PI). In the Modified Proctor test, the optimum moisture content increased, but the maximum dry density varied depending on the material: it decreased in S1 and increased in S2. Finally, with 3.5% CCA, the CBR of S1 rose from 3.0% to 5.8%, and that of S2 from 22.90% to 34.20%, optimizing their geotechnical suitability for subgrades. In conclusion, corn cob ash (CCA) is an effective stabilizer for the evaluated soils. Its incorporation significantly improves their physical-mechanical properties and valorizes a local agro-industrial waste, establishing itself as a sustainable and viable alternative for highway and geotechnical engineering.Item type:Ítem, Análisis comparativo de las propiedades físico-mecánicas de dos suelos naturales y estabilizados con ceniza de la planta de arveja(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-06-30) ;Garcés Calapiña Alex Fabian ;Cevallos Cabrera Jorge WashingtonUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe objective of this research was to comparatively analyze the physical-mechanical properties of soils from Mera (Pastaza) and Unamuncho (Tungurahua), stabilized with pea plant ash (CPA) at percentages of 1.5%, 2%, and 2.5%. For the development of the study, moisture content, grain size analysis, Atterberg limits, modified Proctor, CBR, and X-ray fluorescence (XRF) chemical analysis tests were performed, guided by ASTM and AASHTO standards. The results showed that both soils are granular materials with fines, classified as A–2–4 (silty sand) according to the AASHTO system and SP–SM (poorly graded sand with silt) by the USCS system. The XRF analysis revealed that the pea plant ash (CPA) contains strong components of calcium (Ca) and silicon (Si); these elements facilitated a cation exchange that progressively decreased soil plasticity, and a pozzolanic reaction that increased the California Bearing Ratio (CBR). In Mera, the plasticity index decreased from 13.54% to 0.86%, and the CBR increased from 7.10% to 13.70% with 2.5% of pea plant ash (CPA). In Unamuncho, the plasticity index dropped from 5.66% to 3.25%, and the CBR rose from 10.25% to 14.10%. Likewise, a gradual increase in optimum moisture content and slight variations in maximum dry density were evidenced. The results allowed to conclude that the incorporation of 2.5% of pea plant ash (CPA) represents the optimum percentage and improved the physical-mechanical behavior of the analyzed soils, demonstrating its viability as a stabilizing material for subgrades in road projects.Item type:Ítem, Evaluación de la incorporación, de ceniza de cáscara de mandarina como alternativa para estabilización de suelos(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-06-29) ;Moya Gómez Joselyn Alejandra ;Bayas Altamirano Myriam MarisolUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilIn the present study, it was evaluated whether the incorporation of mandarin peel ash (CCM) improves the physical and mechanical properties of soils, as a sustainable alternative for subgrade stabilization. Therefore, the CCM was prepared through collection, drying, calcining, grinding, sieving, refinement, and homogenization, added in percentages of 2.5%, 3.0%, and 3.5% to two types of soil, a clayey soil (M1) corresponding to Pastaza canton and the second classified as silty sand (M2) belonging to Píllaro canton. Moisture content, grain-size analysis, Atterberg limits, Modified Proctor, and CBR tests were carried out regulated under ASTM and AASHTO standards. The ash presented high contents of potassium (39.45%) and calcium (8.58%) indicating that the stabilization is not completely pozzolanic, it occurs through cation exchange, flocculation, and agglomeration of soil particles. The results obtained in the laboratory showed that in the clayey soil the CBR increased from 4.05% (very poor subgrade) to 14.60% (fair-good subgrade) with an increase of 260.49% with 3.5% ash, while the silty sand soil rose from 13.20% (fairgood subgrade) to 30.00% (very good subgrade) with an increase of 127.27%. The plasticity index was significantly reduced in both soil samples. The experimental results confirm that the incorporation of mandarin peel ash improves the bearing capacity (CBR) and reduces plasticity. Consequently, this agro-industrial waste establishes itself as a technical, sustainable, and viable alternative for subgrade stabilization in highway projects.Item type:Ítem, Análisis de las propiedades físicas y mecánicas del uso de ceniza de coco natural para la estabilización de suelos blandos(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-02-12) ;Salazar Guamanquispe Jorge Antonio ;López Arboleda Alex GustavoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe present study evaluates the physical and mechanical behavior of soft soils stabilized with natural coconut shell ash (CSA), with the purpose of determining its efficiency as an alternative and sustainable material to improve bearing capacity and stability in soils with deficient geotechnical characteristics. This research responds to the need to reduce the use of traditional stabilizers such as lime and cement, whose cost and environmental impacts are considerable, by instead utilizing agro-industrial residues. The work was carried out in three phases. In the first phase, two representative soil samples were collected: one from Puyo (Pastaza) and the other from Baños de Agua Santa (Tungurahua), areas where soft volcanic soils predominate. The ash was obtained through controlled calcination of coconut shells at temperatures between 400°C and 800°C and then sieved to ensure a fine and homogeneous material. Subsequently, the natural soils and the mixtures stabilized with 4%, 6%, and 8% CSA were subjected to moisture content, grain size distribution, Atterberg limits, Modified Proctor compaction, and CBR tests, following ASTM and AASHTO standards. These tests allowed the identification of changes in optimum moisture and bearing capacity. The natural soil exhibited very low CBR values, typical of a deficient subgrade (between 3% and 5% in some cases). With the incorporation of 4%, 6% and 8% CSA, the CBR values showed relevant increases, reaching improvements ranging from 40% to over 100% compared to the natural soil. The results confirm that coconut shell ash can significantly improve compaction and bearing capacity in soft soils. Its performance, combined with its low cost and availability, makes it a technically feasible and environmentally favorable option for road construction projects.Item type:Ítem, Estabilización de suelo mediante adición de ceniza de cáscara de huevo en las propiedades físicas y mecánicas de la vía(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-01-22) ;Castro Castro Luis Antonio ;Bayas Altamirano Myriam MarisolUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis study analyzed soil stabilization through the incorporation of eggshell ash (ESA), a sustainable alternative aimed at improving the physical and mechanical properties of soils used as road subgrades. Two soil samples from different regions of Ecuador were evaluated: M1, collected from the parish of Montalvo (Tungurahua Province) and classified as silty sand, and M2, from the canton of Puyo (Pastaza Province), classified as clayey sand. Both samples underwent an experimental program that included natural condition testing as well as stabilization with 5%, 10%, and 15% ESA. Laboratory procedures consisted of moisture content determination, Atterberg limits, grain size distribution, Modified Proctor compaction, and CBR testing. The results demonstrated the positive effects of ESA as a stabilizing agent. For sample M1, the addition of 10% ESA increased the CBR from 26.2% to 37.6%, indicating a significant improvement in bearing capacity. For sample M2, naturally characterized by low dry density and high optimum moisture, the inclusion of ESA enhanced the compaction behavior and produced a notable increase in CBR compared with the untreated soil (from 11.60% to 24.50%). These findings confirm that eggshell ash is an efficient and environmentally friendly stabilizer capable of improving the performance of soils with different gradations and physical characteristics.
