Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 11
  • Item type:Ítem,
    Repotenciación de la máquina de inyección de plástico vertical (mayal) para el laboratorio de la FICM-UTA
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Ronquillo Paredes Luis Ángel
    ;
    Paredes Salinas Juan Gilberto
    The vertical plastic injection machine, "Mayal," is located in the laboratory of the Faculty of Civil and Mechanical Engineering at the Technical University of Ambato. It is used for educational purposes to manufacture plastic test specimens used in mechanical testing for the analysis of materials and manufacturing processes. The machine presented operational deficiencies, long cycle times, and a high error rate in the molded test specimens, reaching up to 60% of defects in the produced specimens. It is proposed to upgrade the systems to optimize their operation. The methodology employed consisted of equipment diagnosis, the design of solutions based on a selection of alternatives and simulations, and the implementation of the selected new systems, replacing obsolete mechanisms and integrating a semi-automatic control system. An injection pressure of 10 bar and a clamping force of 3117 N were calculated. The redesign considered existing molds for standardized test specimens under the ASTM D638 tensile test specimen, ASTM D790 flexural test specimen, and ASTM D5625 impact test specimen standards. As a result, the work cycle time was reduced by 30%, doubling productivity and reducing the percentage of defective parts. The intervention of the machine allowed its functionality to be recovered and the control system to be updated, for the calibration of the work cycle parameters.
  • Item type:Ítem,
    Diseño y construcción de un sistema hidrostático para pruebas de bop en pozo de la empresa EQUIPETROL S.A
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Castillo Navarrete Xavier Alejandro
    ;
    Castro Miniguano Christian Byron
    Equipetrol S.A. Ecuador focuses on providing services and equipment for the oil and gas exploration and production industry. It currently has three active service lines: Slickline, which focuses on wireline operations for plugging, dewaxing, valve installation, and other tasks; Wireline, which uses electrical conductors for well logging and perforation; and Completions, which is dedicated to the installation of single and dual completions for production. Therefore, the wide variety of tools and equipment used in different areas must be thoroughly evaluated, which is why some robust devices that are already in operation are tested in the field. However, the current hydrostatic system has limitations in terms of transport due to its robust and heavy design, causing delays in logistics and operations, which has led to the proposal of a portable system design based on the company's requirements. The methodologies used are comparative analysis between the various options on the international market to apply the weighting method, which is based on the most notable factors such as the type of pumps, structure, and pressure readings, which are evaluated against criteria of utility, investment, maintenance, and operability. Subsequently, a customized design is proposed for analytical study in the selection of components and raw materials, in addition to simulation of stresses, displacement, and safety factors. As a result, a compact design was obtained with two pneumatic pumps, one piston and one double diaphragm, for pressure testing at 4500 psi according to API standards, with the possibility of connecting a pressure transducer for safe and accurate monitoring of the tested equipment.
  • Item type:Ítem,
    Diseño y construcción de un prototipo de máquina de corte de plasma cnc para placas de hierro de 6 mm de espesor para la empresa POWERSTEM CIA LTDA
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Quishpe Toapanta Cristian Samuel
    ;
    Carrillo Rosero Carlos Mauricio
    The company POWERSTEM CIA LTDA. dedicated to the repair and maintenance of heavy machinery made cuts with traditional methods such as oxy-fuel cutting or in the case of needing small parts with a grinder with a cutting disc, these processes represented losses in production times, and did not guarantee a good quality of cuts and even the excessive use of heat could deform the pieces that were made, so in this project a prototype of CNC plasma cutting machine for iron plates of 6 mm thick is designed and built. This prototype allowed to maintain and even increase production times, in addition to being able to make more types of figures or parts that are required with more precision, for this we considered the needs of the company, which not only seeks to improve its processes, but also to position itself as a more competitive company in the area. To develop this project we started with the search of information of prototypes that have been made, this allowed us to generate an idea of the design and the materials that are necessary for the construction, in addition an analysis of the cutting heights at different pressures and with variation of the speed was made, which allowed to establish certain parameters with which cutting tests are made and it is determined with which ones a better result is obtained. To finally perform cutting tests of figures and determine what is the percentage of error that has the design piece with respect to the piece obtained from the cut and with this also checks the correct operation of the movement of the axes.
  • Item type:Ítem,
    Diseño del alcantarillado sanitario y pluvial del caserío Sigsipamba de la parroquia de Picaihua del cantón Ambato provincia de Tungurahua etapa 2
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil., 2025-02)
    Cruz Andrade, Jeycob Israel
    ;
    Guevara Robalino, Jorge Javier
    A sanitary sewer system is considered an essential service for the population due to its impact on people's health and hygiene, while a storm sewer system does not help prevent flooding and natural disasters. Despite this, in the Picaihua parish, Ambato canton, Tungurahua province, there are many sectors that lack this service. Because of this, the objective of this technical project is to design the sanitary and storm sewer system, including its treatment plant, for the Sigsipamba hamlet. The methodology used in this project was in several phases: in the first phase, the design parameters were determined, which provide us with technical values and criteria to size and plan our project, and the obtaining of data, which includes the topographic survey, which provides us with georeferenced points of our project. Subsequently, the design of the sanitary, storm sewer and PTAR was carried out in accordance with the Bolivian standard NB 688 and the current regulatory framework of Senagua. In the final phase, a unit price analysis of the project was carried out, which gives us an approximate value of the construction cost of the project. The result was a sanitary and storm sewer network of 26 wells and 25 pipes for both the sanitary and storm sewers with a length of 972.32 m, and a flow rate of 11.94 lt/sg and 490.65 lt/sg respectively. As for the wastewater treatment plant, the following were obtained: an inlet channel, grate, sand trap, septic tank, in addition to the drying bed and the ascending flow biological filter, which meet the established parameters. Finally, the Unit Price Analysis of the project was determined, which is the value of five hundred and fifty-five thousand one hundred and thirty-one US dollars and seventy-four cents.
  • Item type:Ítem,
    Diseño y construcción de una máquina bordonadora de tanques de acero inoxidable con un sistema hidráulico para incrementar su resistencia en la empresa INOX TEC
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-02)
    Aviles Brito, Carlos Kevin
    ;
    López Villacis, Gonzalo Eduardo
    The metalworking company INOX TEC located in Cunchibamba, in the province of Tungurahua, requires a beading machine for stainless steel sheets and tanks, to improve the properties of said material. It was proposed to design and build a hydraulic beading machine that can perform beading with thicknesses of up to 4 mm in AISI 304 stainless steel. The study was based on bibliographic sources and field studies, the feasibility of implementing the equipment was demonstrated. An efficient mechanical system was selected, appropriate to the productive capacity of the company to guarantee its economic viability, in the same way a hydraulic system was used to facilitate its use. Calculations, designs and machining processes were carried out, plans and computer simulations were prepared. Likewise, studies were carried out after the beading process where AISI 304 stainless steel significantly improves its properties, as well as its hardness and resistance. The hydraulic beading machine offers an ideal and fast solution through the use of a double-acting pneumatic cylinder that allows quick and efficient actuation at the time of beading, as well as a control center through which the process can be managed in a simple way. The materials used and the design of the equipment guarantee its longterm durability and efficiency. This project contributes to the well-being of the company and has the potential to be applied in other similar contexts if required.
  • Item type:Ítem,
    Diseño de un sistema mecánico para compactar desechos de envases de espuma de poliestireno, provenientes del comedor universitario de la Universidad Técnica de Ambato campus Huachi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-09)
    Freire Villegas, Lenin Omar
    ;
    Cabrera Anda, Santiago Paúl
    The environmental impact of plastic in Ecuador represents 44.9 percent of styrofoam containers, in university canteens there is a large amount of this material agglomerated in garbage cans that occupy a considerable space, the research aims to design a mechanical system that helps compact waste from styrofoam containers, allowing the initial volume to be reduced to a more manageable volume, to avoid further contamination. A descriptive method was used for the collection of information and documentation of the characteristics of polystyrene, identification of requirements and design specifications, in addition an exploratory method was carried out that involves an open and flexible approach in the search for solutions; An analytical method that follows four stages was proposed: bibliographic compilation, definition of design alternatives, selection of materials, mechanical components and design, and simulation of the compaction system. Finally, the efficiency of the system was evaluated by measuring the relationship between the volume of compacted waste and the space occupied. The system occupies an area of two square meters and compacts 1000 kg of waste into a volume of one cubic meter. The percentage reduction in contamination was calculated by comparing the amount of Styrofoam waste generated before and after implementing the system, achieving compaction of up to 71.4 percent. It can be concluded that the system has a high efficiency when compacting a large amount of waste in a small space.
  • Item type:Ítem,
    Diseño y construcción del asiento abatible del paramédico para ambulancias según la norma técnica ecuatoriana NTE INEN 2 512:2009
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-09)
    Valencia Castillo, Rafael Alejandro
    ;
    Arroba Arroba, César Hernán
    The issue addressed in this research stemmed from the lack of a proper design for the paramedic's seat, which hinders compliance with regulatory requirements and the assurance of service quality. The objective is to design and construct a seat that complies with the NTE INEN 2 512:2009 standard. The gathered information revealed deficiencies in the seat concerning the NTE INEN 2 512:2009 standard. For this reason, efforts were made to design a seat that meets the NTE INEN 2 512:2009 standard, and a dynamic test based on CEPE R80 was implemented to assess the seat's strength under the conditions specified by the standard. The seat was simulated using specialized software, which provided data close to reality, and these results were compared with the aforementioned standards. Regarding the manufacturing process, CNC cutting and CN folding technologies were employed, along with hydraulic bending, to enhance the seat assembly precision. As a result, a seat design was obtained that met multiple aspects of these standards. Its construction is feasible using readily available materials in the market, which would facilitate large-scale production and distribution. This advancement in the design of sturdy seats that comply with regulations represents a significant step forward in the industry, ensuring comfort and, most importantly, the safety of paramedics.
  • Item type:Ítem,
    Diseño del alcantarillado sanitario del sector Cacahuango Paraíso, Pinguilí las Lajas y Pinguilí Santo Domingo, para mejorar la recolección de aguas residuales, de la parroquia Pinguilí, cantón Mocha, provincia de Tungurahua.
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-06)
    Muñoz Barrionuevo, Erika Anabell
    ;
    Moya Medina, Dilon Germán
    This Technical Project was carried out with the purpose of improving the collection of wastewater from the study sectors, which lack a sanitary sewerage system that helps to evacuate the sewage generated by the inhabitants of the sector, avoiding an overdemand in the discharge sector PTAR-Pinguilí, each of the units were evaluated, contemplating in their study the new inflows. The methodology was based on a bibliographical investigation of current regulations, which indicate the basic parameters that must be followed to carry out a correct design of the networks. To carry out the topographic survey, the RTK high-precision equipment was used, guaranteeing that it has a minimum margin of error. Once the data was obtained, the design of the sanitary sewerage system was carried out using appropriate software using the parameters established by national and international regulations; the use of PVC pipe with a nominal internal diameter of 200 mm, with a length of 5283.72 m, was established. As a final product, a total of twenty-three detailed plans, 3 flow calculation sheets, 6 hydraulic calculation sheets, 27 treatment plant evaluation sheets including proposed improvements and a final budget of USD 305,932.39 cents, without include VAT, so that the project can be carried out later, contributing to the development of the Pinguilí parish.
  • Item type:Ítem,
    Diseño de un prototipo de sistema de fermentación industrial para la empresa “Induacero Cía. Ltda”
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-03)
    Guanín Araque, Adrian Israel
    ;
    Cabrera Anda, Santiago Paúl
    This project was requested by the company "Induacero Cía. Ltd.” because they have the need to build stainless steel fermenter tanks with a cooling system for the beer industry. Because there are no solutions on the market for micro-enterprises that need a more sophisticated system to ferment small batches. In the present project, the design of the fermenter tank was carried out and it began by calculating the internal measurements, then the ASME section VIII Division 1 regulations were used to calculate the pressures to which the tank will be subjected and the thicknesses necessary to withstand these pressures. Then the heat transfer analysis of the tank cooling system was carried out. Finishing with the design, the algorithm of the control system was made and based on this, the programming in ladder language so that the code can be entered into a PLC, then the design of the graphical interface that will be shown to the user so that he can manipulate the program. Upon completion of the design, the prototype will be delivered to Induacero Cía. Ltda. to prepare it for the benefit of the company.
  • Item type:Ítem,
    Evaluación de la vulnerabilidad sísmica de edificaciones de estructuras metálicas en la parroquia Atahualpa, Ambato, Ecuador: Propuesta de reforzamiento estructural de una edificación representativa
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2023-03)
    Sánchez Borja, Sebastián Vinicio
    ;
    López Villacís, Gonzalo Eduardo
    The present investigation consisted in the evaluation of the seismic vulnerability of metallic buildings in the town of Atahualpa, this was used to evaluate and identified informal constructions, which need to be more analyzed, also this investigation was used to do a reinforcement proposition to an important building in the zone. In the first instance all the metallic buildings were identified and starting in that place the formularies of the normative FEMA P-154, NEC 15 and FUNVISIS, and finally stablish the vulnerability grade of the buildings. Subsequently, a summary table was obtained, where the vulnerability values, general data and prioritization index of the buildings were identified. Once the most important structure in the parish was selected, the structural design and analysis of the seismic behavior was carried out, through the linear spectral modal analysis, the linear time history analysis and pushover with and without dissipators, with which a structural reinforcement was proposed for a return period of 475 years, using viscous dissipators.