Browsing by Author "Guevara Robalino, Jorge Javier"

Now showing 1 - 20 of 41

La adición de aserrín y poliestireno en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) Morales Apráez, Jorge Luis; Guevara Robalino, Jorge Javier
In the development of the present investigation, in the first instance tests were performed on the aggregates to form the masonry according to an initial dosage that allowed us to obtain good results at compression based on the INEN 3066 norm. The study addressed, opted for the substitution of the chasqui by 15%, 25% 50% and 75% sawdust, from which it was obtained that the handcrafted blocks have an approximate resistance of 10.96 kg / cm² and that under this parameter the blocks of 15 and 25% comply with the ranges established as original dosage unlike the artisan blocks, while the one with 50 and 75% sawdust is discarded, due to its very low compressive strength. On the other hand, within the present and following the Chilean regulations NCH 849 and NCH 851, a thermal and acoustic test was carried out, obtaining as a result that the block with 75% sawdust has greater thermal insulation capacity unlike the other blocks tested, while the block with 25% dosing of the aggregate has greater acoustic insulation capacity. Within the study addressed, the process carried out for both manufacturing and laboratory tests is clearly indicated, which generated feasible results, framed within the normative statutes for construction.
La adición de botellas plásticas PET en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) Paguay Córdova, Edison Andrés; Guevara Robalino, Jorge Javier
The present investigation has been carried out with the purpose of knowing the influence that the blocks of work with the plastic have with the temperature and the acoustic conditioning in the middle of a hermetic chamber; for what was done and a dosage was elaborated applying the Optima Density Method for the elaboration of Type B blocks according to the NTE INEN 3066 standard, which served as the basis to elaborate the other dosages with the addition of 15, 25, 50 and 75% of PET plastic replacing the coarse aggregate (Chasqui) and later elaborated type walls of 1.00 mx 0.70 m. As it increases the percentage addition of PET material, the resistance to compression decreases by 4, 12, 30 and 50%, however it is still superior to the traditional artisan block; On the other hand, the more the PET material is added, the better the thermal and acoustic variation in relation to a traditional block and block wall, indicating that the correct addition of the PET material has a significant influence on the temperature control and sound insulation in the environments of a dwelling by not allowing the passage of heat and noise from one environment to another; being the best specimen resulting from the thermal tests the wall made with block with 50% PET and the block wall with 75% PET for the acoustic test.
Análisis de los procesos de contratación y ejecución de obras públicas; determinación y planteamiento de soluciones en sus falencias y áreas críticas de carácter técnico
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-06) Ruiz Muñoz, Félix Alejandro; Guevara Robalino, Jorge Javier
One of the areas in which the State makes the greatest investment of economic resources is in the execution of public works; for this reason, these must be carried out efficiently, and subject to current regulations. The general objective of this work was to identify critical areas; that is, of possible errors or shortcomings, which accuse the projects tendered by the Decentralized Autonomous Government of the Province of Bolivar. For the development of this project, an analysis of the pre-contractual processes, contracting and execution of works was carried out, based on the provisions contained in the Organic Law of the Public Procurement System, the Internal Control Rules and the Resolutions issued by SERCOP, in order to demonstrate the effects derived from the non-observance of the aforementioned regulations. Then each of the tenders of the year 2017 were analyzed, errors were identified in them, a report was issued which contained all the details of the shortcomings identified with their respective solutions, with this information we proceeded to tabulate and graph the results obtained. In order to avoid making mistakes in the contracting and execution of works, in application of one of the objectives of the work, recommendations are made on possible corrective measures that could be adopted.
Análisis de un sistema de aprovechamiento de aguas lluvias para la dotación en viviendas unifamiliares en la parroquia Atahualpa, cantón Ambato, provincia de Tungurahua.
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-08) Espinosa Vaca, Francisco Alejandro; Guevara Robalino, Jorge Javier
For the elaboration of this project, a detailed and specific survey was carried out for the inhabitants of the area to be studied, choosing primarily MIDUVI type singlefamily houses, the results of which were useful for the development of the rainwater harvesting alternative. The system was designed with several stages such as: the catchment system, which consists of a roof that collects rainwater; a conduction system that directs through rainwater channels with a micro mesh and downspouts all the water collected to the filter, a filtration system consisting of a tank in which was filled with (coarse broken stone, fine broken stone, Zeolite and activated carbon), which materials helped to purify the rainwater, chlorine treatment that disinfected the rainwater so that it can be water for human consumption and finally that this purified water is distributed by a hand pump that connects to the main internal supply system of the house. Everything was designed strictly following different standards and guidelines for rainwater harvesting dictated by the Pan American Health Organization (PAHO) and the World Health Organization (WHO), which set the guidelines for the correct design and use of this water resource. In order to determine that treated rainwater can be used for human consumption, this water was analyzed at the EMAPA water quality laboratory and the results were compared with the TULSMA and the INEN 1108 "Water for human consumption"
Análisis del bagazo de caña como filtro en el tratamiento de aguas residuales provenientes del Camal Municipal de la ciudad del Puyo, provincia de Pastaza
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2017) Curipallo Quispe, María Belén; Guevara Robalino, Jorge Javier
For the development of the project, as a place of study was chosen a slaughterhouse, where was obtained the wastewater necessary for the verification of the efficiency of the filter during operation. With regard to the experimental design, it has been made a wooden structure of 2m of height, which served as a support for a tank of 208.20 lt where was placed the effluent collected, which through a line of 1 m came to the filter, the filter material was sugar cane bagasse previously washed and dried in the sun. To ensure the continuing operation of the filter flow rate used was of 0,105 lt/min. During the 91 days of the filtration process, were obtained 9 samples of filtered water and 1 sample of unfiltered water. For later analyze parameters of great importance such as: Biochemical Oxygen Demand (DBO5), Chemical Oxygen Demand (DQO) and total suspended solids (SST), to each of the samples. In order to guarantee the reliability of the results, the analyzes were carried out in an accredited laboratory. Once they are obtained and analyzed the results, proceeded to compare them with the values of permissible limits specified in the Unified Text of Secondary Legislation of the Ministry of the Environment (TULSMA). According to the permissible limits only the concentration of SST achieved a decrease below the limit of 130 mg/lt that specified by the standard, while the parameters of DBO5 and DQO in spite of not getting concentrations lower than those specified, 100 mg/l and 200 mg/lt respectively, obtained significant decreases in comparison with the wastewater sample without filter. Based on the results, of the filter recorded greater efficiency to 95% for DBO5 and DQO, and more than 65% for SST. So check the effectiveness of the material to decrease the levels of contamination present in the waste water from a slaughterhouse.
Análisis teórico-experimental de la resistencia a la compresión del hormigón y su influencia en el módulo de elasticidad estático en el cantón Santo Domingo de los Colorados, provincia de Santo Domingo de los Tsáchilas
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-09) Chacón Santos, Víctor Steve; Guevara Robalino, Jorge Javier
This research work was carried out by taking samples of stone materials from the "Brisas del Toachi" and "Copeto" mines using INEN 695 standards, then a sample reduction was made according to INEN 2566, continuing with the investigation of some physical mechanical characteristics indicated in INEN 872 in order to make a dosage for a structural concrete and determine the actual density of cement using INEN 156. The mix design was made for each mine with its respective dosage using the method of optimum densities for concrete compressive strengths of 210 and 240 kilograms over square centimeters. Once the dosages were obtained for each mine, concrete specimens were made for their respective curing using INEN 3124 standard; fresh concrete tests were carried out, such as: sampling INEN 1763; density, air content and yield INEN 1579, settlement INEN 1578; hardened concrete tests were carried out to determine the compressive strength at 3, 7 and 28 days INEN 1573. With this we have access to information that allows us to interpret and graph these values for a better understanding and analysis of them. Finally, the experimental MEE is determined by using the ASTM C469 standard and with this, the use of values for the factors exposed in the ACI 318-14 standard and its correct adaptation according to the use of the materials of the mines studied is proposed.
Aplicación del reglamento de seguridad y salud para la construcción y obras públicas, y la influencia en el costo de construcciones de sistemas de alcantarillados
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2017) Freire Vásconez, Diego Fabián; Guevara Robalino, Jorge Javier
For the execution of this work, we collected information from the Institutional page of SERCOP, through visits to sewage works in the city and through application of surveys to engineers dedicated to the construction of sewage works. The information collected was processed with the intention of searching the cost of the use of safety equipment by workers during the execution of a sewer work, this cost is absorbed by the indirect percentage of a budget, which contributes to that the professionals do not have clear accounts of what they obtain of net profit, to avoid these situations that appear every day of the constructors, we determined a coefficient that when Applied to unit price analyzes, the resulting budget already contemplates these costs for the use of safety equipment, making these values to be added to the direct costs of the budget.
Comparación de la respuesta sísmica entre pórticos especiales a momento y pórticos arriostrados excéntricamente, en un edificio de acero de 10 pisos, en el cantón Ambato, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-09) Aleaga Del Salto, Luis Alfonso; Guevara Robalino, Jorge Javier
Ecuador is a country of high seismic danger; therefore, the calculation of structures will always be a challenge for engineers since every day new advances in science and technology emerge, making it possible to predict the behavior of a building in extreme events such as earthquakes; in this work the Ceinci-Lab Computer System has been used, which allowed to perform analysis and design of structures step by step obtaining clear and accurate results. The objective of this research is to compare the seismic response between special moment frames and eccentrically braced frames in a 10-story steel building. A simple and regular structural configuration was used to obtain a better seismic performance of all the components of the system. Subsequently, the seismicresistant analysis of the frames was carried out with the different structural configurations proposed in the Ceinci-Lab computer program, using the linear modal spectral and static equivalent analysis for its resolution and complying with the guidelines established in the Ecuadorian construction standard and international codes; finally, it was determined that the building composed of eccentric diagonals had a better seismic response than the one composed of moment resisting frames, obtaining lower displacements and floor drifts; It was also verified that the demand versus capacity of each system is optimal, thus ensuring a strong column - weak beamxvii behavior; additionally, a nonlinear pushover analysis was performed to determine the real maximum resistance of the structure and the performance of all its components; therefore, it is essential to consider the use of bracing in the structural configuration of medium-rise buildings, especially with short link elements, since they act as energy dissipaters, improving the stiffness and global response of the system in severe earthquakes.
Diagnóstico visual y estructural del pavimento de la vía comprendida desde el barrio Santa Rita abscisa 0+000 km hasta el barrio Huagrahuasi Chico – la Esperanza abscisa 4+500 km perteneciente al cantón Santiago de Píllaro
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08) Viteri Izurieta, Vinicio Sebastián; Guevara Robalino, Jorge Javier
The condition and serviceability of a road is one of the fundamental aspects, emphasizing that the current condition is considered regular, requiring the execution of road maintenance. The analyzed road connects an area that contributes mainly to the agricultural, livestock and productive development of the Santiago de Píllaro canton. Initially, the soil typology was analyzed by extracting soil pits every kilometer, the natural moisture content of the soil, granulometry, Atterberg limits, modified Proctor method B and CBR; the current TPDA was analyzed using the methodology of the thirtieth hour, the ESAL deduction that was projected for the design year, using the PCI based on ASTM D4695 and the pavement condition was identified from a total of 14 sample units, identifying that the road had a resultant of 51.21 equivalent to a regular road condition. The resulting deflectometry resulted in the first two kilometers requiring routine maintenance, while the remaining 2.5 kilometers required road rehabilitation based on redesigning the pavement structure thickness. As a result, the maintenance plan included crack sealing and patching in the initial 2.0 kilometers and in the remaining 2.5 kilometers, a redesign of the layers that make up the pavement structures was proposed, obtaining a total reference budget of $ 274 893,095, to improve and optimize the current condition of the road.
Diseño de la captación, conducción y tratamiento de agua potable en el sector de La Carbonería hacia la red existente de la comunidad de Atillo, cantón Mocha, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-03) Jaramillo Tunja, Marco Antonio; Guevara Robalino, Jorge Javier
This project was carried out due to the lack of water in the community in times of drought, it was necessary to design and implement a gravity conduction system in a pressure pipe, together with its infrastructure, hillside catchment for concentrated spring. Information was collected in the field, through surveys, information provided by the National Institute of Statistics and Censuses (INEC), complying with the minimum design parameters in force for the rural sector, such as the Ecuadorian Code of Practice (CPE INEN) and water quality parameters for human consumption. It should be noted that the project has its own unit price analysis, reference budget, environmental impact study in accordance with environmental regulations (TULSMA), technical construction specifications to clearly understand what its satisfactory execution means and the relevant plans. At the end of the study, it is proposed to implement a new conduction line that will improve the quality of life of the 476 inhabitants of the Atillo community, by guaranteeing a continuous service of purified water, complying with the minimum requirements such as pressure, flow and speed, according to with the standard (CPE INEN).
Diseño de la red de abastecimiento de agua potable para la urbanización “Suomat” del cantón Carlos Julio Arosemena tola, provincia de Napo
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2016-06) Gómez Reyes, Marilín Alexandra; Guevara Robalino, Jorge Javier
Diseño de la red de alcantarillado de la vía principal de ingreso de la parroquia El Triunfo perteneciente al cantón Patate de la provincia de Tungurahua – Ecuador
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08) Díaz Carvajal, Jefferson Leonardo; Guevara Robalino, Jorge Javier
Due to the continuous population growth and territorial expansion in the El Triunfo parish, the lack of adequate infrastructure for a sewage system has been identified as the main problem. For this reason, the objective of this project is to design a sewer network that improves the living conditions and health problems of the inhabitants. To do this, first an exhaustive investigation was carried out on the study area, covering climatic data, economic activities, geographical location, and application of surveys. Subsequently, a topographic survey was carried out, then the calculations and design parameters necessary for the project were developed, in which the hydraulic and sanitary requirements were evaluated. Thus, estimating the design parameters in an Excel spreadsheet, all these designs were carried out respecting the EMAAP-Q and IEOS regulations. Then, detailed project plans, the reference budget, unit prices and technical specifications were prepared. As a result, a sanitary sewage network was obtained that consists of 6,400 m of main network with PVC pipes with diameters between 200 and 250 mm, 132 inspection wells, 23 concrete boxes, 300 home connections, 2 treatment plants and 4 biodigester tanks. , concluding that the design of the project significantly contributes to sanitary conditions, since they comply with the values established in the aforementioned standards, it was also obtained that the budget for carrying out the project is 823,858.03 dollars and the term is 6 months.
Diseño de la red de distribución de agua potable de los barrios San Jacinto y San José La Lindera perteneciente a la parroquia San Andrés, cantón Píllaro, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2016) Cruz Carrasco, Roberto Cristian; Guevara Robalino, Jorge Javier
Diseño de la red de distribución del agua potable de los barrios Yatchil Central y Huapante Chico perteneciente a la parroquia San Andrés, cantón Píllaro, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2016) Toainga Yansaguano, José Luis; Guevara Robalino, Jorge Javier
Diseño de la red de distribución principal de agua potable para la parroquia Pasa del cantón Ambato, provincia de Tungurahua-Ecuador
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2018) Tipantuña Lema, Álvaro Vinicio; Guevara Robalino, Jorge Javier
The technical project is a contribution to the improvement of the quality of life of the inhabitants of the parish of Pasa with the purpose of designing the main distribution network for water supply to the center of the community. It began collecting statistical data and that were provided by the Decentralized Autonomous Government of the Rural Parish of Pasa where you can identify the number of beneficiary inhabitants that currently exist, their social and economic situation, after this, the ground was lifted using precision equipment, in this case, the Trimble total station. Already in office work, we proceeded to the most optimal layout of the network as well as the respective calculations where the diameters of the PVC pipes were determined, calculation of work volumes and already in the design of the network we will use the free software EPANET 2.0, which allows us to know the pressures, velocities and flow rates that circulate through each node and proposed pipeline, achieving a gravity system. All the aforementioned procedures are governed by the Ecuadorian Standardization Institute, in the chapter on Drinking Water Supply System and the Ecuadorian Construction Standard. Finally, an environmental impact analysis was carried out, as well as a plan to reduce its effect, its respective analysis of unit prices and a valued work schedule that will show the construction stages of the project over time.
Diseño de la red de distribución principal de agua potable para la parroquia Pasa del cantón Ambato, provincia de Tungurahua-Ecuador
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2018) Caguana Fonseca, Vladimir Patricio; Guevara Robalino, Jorge Javier
The technical project is a contribution to the improvement of the quality of life of the inhabitants of the parish of Pasa with the purpose of designing the main distribution network for water supply to the center of the community. It began collecting statistical data and that were provided by the Decentralized Autonomous Government of the Rural Parish of Pasa where you can identify the number of beneficiary inhabitants that currently exist, their social and economic situation, after this, the ground was lifted using precision equipment, in this case, the Trimble total station. Already in office work, we proceeded to the most optimal layout of the network as well as the respective calculations where the diameters of the PVC pipes were determined, calculation of work volumes and already in the design of the network we will use the free software EPANET 2.0, which allows us to know the pressures, velocities and flow rates that circulate through each node and proposed pipeline, achieving a gravity system. All the aforementioned procedures are governed by the Ecuadorian Standardization Institute, in the chapter on Drinking Water Supply System and the Ecuadorian Construction Standard. Finally, an environmental impact analysis was carried out, as well as a plan to reduce its effect, its respective analysis of unit prices and a valued work schedule that will show the construction stages of the project over time.
Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Picaihua – Chiquicha de la ABS 0+000 hasta 4+700 de la provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09) Tenelema Guaita, William Javier; Guevara Robalino, Jorge Javier
Due to the importance of the road that connects the parishes of Picaihua with Chiquicha, it has been necessary to improve the quality of the asphalt pavement, because it is used for the transportation of people and their products; therefore, a design of a conservation plan for the structure of the wearing course is proposed; For this purpose, a topographic survey was carried out with the RTK high precision equipment, using the Civil 3D program, a plan of the implementation of the road was obtained, then the vehicle counting station was established twelve hours a day for seven days, in which the vehicular mobility was analyzed, the future traffic was calculated with a projection of 20 years and the road was classified as a class II collector road according to the (MTOP). For the current pavement study, a visual test was used through the pavement condition index method, identifying the type of failure and level of severity. An average PCI of 60.67 percent was obtained indicating that the pavement quality is "Good". General deflections were measured using the Benkelman Beam, which allowed for the classification of the deflections present as Type I. A soil study of the road under study was also carried out, taking in situ disturbed samples for laboratory analysis. As a result, the soil was classified as silty sand, resulting in an average CBR of 36.42 percent, which belongs to a good quality subbase. Considering the results, the use of a Periodic type of maintenance plan is proposed, with a proposed budget of $34,749.77.
Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Picaihua – Chiquicha de la ABS 4+700 hasta 9+400 de la provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-08) Vega Martínez, Fabricio Adrián; Guevara Robalino, Jorge Javier
Due to the importance of the road that connects the Picaihua Parish with Chiquicha, it has been necessary to maintain its good condition of the road surface, being the main road used by many residents for their different daily activities and the economic growth of the place; therefore, the design of a conservation plan for the surface layer structure will be carried out; For this, first a topographical survey was carried out with a GPS RTK, the implementation of the road and its respective plan were obtained using the appropriate software, later a vehicular count point of 12 hours/day for 7 days was established, the vehicular mobility, future traffic was calculated with a 20-year projection and the highway was classified as a class III collector according to the (MTOP). For the current study of the pavement, a visual test was used through the pavement condition method, identifying the type of failure and degree of severity. The PCI average of 64.00 percent was obtained, indicating that the quality of the pavement is "GOOD". The general deflections were measured using the benkelman beam, which allowed classifying the deflections present as Type I. On the other hand, the study of soils in the area was carried out, taking altered samples in situ for laboratory analysis. As a result, the soil was classified as Sand-Silty, resulting in an average CBR of 15.19 percent, which belongs to a "Regular to Good" quality subgrade. Considering the results, the use of a periodic type maintenance plan with a budget of $19497.96 is proposed.
Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Salasaka – Picaihua ABS 0+000 – 4+500 de la provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09) Arellano Barahona, Luis Alfredo; Guevara Robalino, Jorge Javier
The roads, as well as their infrastructure, provide an indispensable base worldwide in order to provide the functioning of all economies. Its extension includes millions of kilometers, which is why it is essential to adequately preserve the respective infrastructure, this in order to preserve and increase the economic, social, and cultural benefits, among others. The Tungurahua Road network leads to being one of the fundamental pillars for the promotion of productivity, for which the generated project provided a maintenance plan for the study road, in which technical studies were carried out such as the lifting of the via georeferencing, the study of vehicular traffic, as well as the respective standardized soil and field tests to determine the condition of the pavement on the road. It was concluded, calculating in the traffic quantification, that the road under study is classified as a type II collector which is located on an excellent subgrade according to 21.61 percent of the CBR, composed mainly of silty sands with poorly graded gravel in terms of its structure. It was calculated that the road under study is in poor condition with a rating of 35.87 points based on the PCI and presented type III deflections in the asphalt layer. A maintenance plan was proposed, according to the damage to the road, providing solutions that allow its conservation and rehabilitation, with a budget of 624,668 dollars and 38 cents.
Diseño de un sistema de abastecimiento de energía eléctrica con el uso de energías renovables como la eólica en viviendas unifamiliares en la parroquia Ambatillo cantón Ambato, provincia de Tungurahua
(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-10) Pérez Barrionuevo, Franklin Andrés; Guevara Robalino, Jorge Javier
This technical project describes a plan to generate electricity using the wind resources of Ecuador. In the first instance a brief explanation is indicated regarding renewable energies, especially wind energy and its importance. The next step is an investigation on the operation of the wind turbines that will accommodate the generation of energy in a social interest housing. An analysis of the area in question is necessary, specifically the wind speeds presented during the days of the research work, as well as other considerations for subsequent data such as: atmospheric pressure and air temperature of the measurement stations. closest to the place. Continuing, the design of the proposed system for the implementation in the home in the future is dimensioned and planned, previously the most important variables such as economic, technical and meteorological to carry out this project. Subsequently, a cost-benefit analysis of the system is proposed, compared with the traditional electrical system implemented by the public electricity company, thus determining the advantages and disadvantages of the wind system. In the future, the specific information in this thesis project is expected to provide sufficient technical knowledge to carry out the practice of a wind energy application in Ecuador, not only at the level of single-family and multi-family housing, but at large industries and large systems in general, since it is a clean energy that will benefit the country.