Optimización-MSR del material compuesto de matriz epoxi reforzado con fibra natural de Chambira (Astrocaryum), mediante infusión de resina al vacío y su incidencia en las propiedades mecánicas
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
The importance of the discovery of new materials based on natural fibers greatly
contributes to the contribution of properties that are often friendly to the environment,
as well as for the bodywork industry to be effective when making accessories.
Therefore, the purpose of this research is to investigate and analyze the mechanical
properties that can be obtained from the materials to be used based on quantitative data
collection in the case of the physical and mechanical properties of the reinforcement
material as well as the material of the resin, in turn we proceeded through the vacuum
bagging process by infusion to join both components, giving us as a result a new
material already characterized, passing to the mechanical analysis stage which was
carried out by the standards of TENSILE TEST_ASTM D3039, FLEXION_ASTM
D7264, and IMPACTO_ASTM D52628-10, later the results obtained were analyzed
by means of a mathematical analysis of minitab in which a main characterization was
obtained that the material already established previously can yield favorable results
through a results orientation configuration under a standardized norm that in the future
will serve for the industrial sector as a reference.
Description
La importancia del descubrimiento de nuevos materiales basados en fibras naturales
ayuda mucho a la contribución de propiedades muchas veces amigables con el medio
ambiente, así como para la industria carrocera se efectividad al momento de realizar
los accesorios.
Por lo que la finalidad que tiene dicha investigación es investigar y analizar la
propiedades mecánicas que se puedan obtener de los materiales a utilizar partiendo de
una tomade datos cuantitativos en el caso de las propiedades físicas y mecánicas del
material de refuerzo como del material de la resina, a su vez se procedió mediante el
proceso vacuum bagging por infusión a unir ambos componentes dándonos como
resultado un nuevo material ya caracterizado pasando a la etapa de análisis mecánico
la cual se realizó mediante las normas de ENSAYO DE TRACCIÓN_ASTM D3039,
FLEXION_ASTM D7264, e IMPACTO_ASTM D52628-10, posteriormente los
resultados obtenidos fueron analizados mediante una análisis matemático de minitab
en el cual se obtuvo una caracterización principal que el material ya establecido
anteriormente puede arrojar resultados favorables mediante una configuración de
orientación resultados bajo norma estandarizada que a futuro servirá para el sector
industrial como referencia
Keywords
ENSAYO DE TRACCION, ENSAYO DE FLEXION, ENSAYO DE IMPACTO, ASTM D7264, ASTM D3039, ASTM D52628-10, VACUMM BAGGIN