Análisis de vulnerabilidad ante eventos provocados por caudales fluviales extremos, procedentes de avenidas pluviales del Río Ambato, del sector las Viñas Shina, entre el paso lateral de Ambato y la vía a las Viñas; parroquia Izamba; cantón Ambato; provincia Tungurahua
No Thumbnail Available
Date
2018
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Abstract
En este análisis se recaudó, procesó, seleccionó y excluyó los datos de las estaciones
Limnimétricas con influencia en el área de estudio, generando la serie de caudales que
se utilizó en el análisis, se obtuvo el período de retorno en base a las recomendaciones
del NEVI-12, se obtuvo el caudal de diseño por medio de una prueba de bondad de
ajuste de proyecciones estocásticas que relaciona los métodos de distribución
probabilística de Gumbel y Pearson tipo III, se determinó el coeficiente de rugosidad
del cauce en base a los métodos de Cowan y Ven Te Chow, los cuales utilizan datos
obtenidos a partir de la visita de campo en la cual se levantó información pertinente a
profundidades, coberturas, e identificación visual del tipo de suelo presente en el lecho
del río. Luego se obtuvo la topografía de la zona de influencia en base a las cartas
topográficas en escala 1:1000 proporcionadas por el Departamento de Planificación
del GAD Municipalidad de Ambato, luego se continuó con el modelo matemático de
simulación de la avenida por medio del programa Hec-Ras, el cual generó el área de
inundación de la zona analizada, se elaboró planos temáticos y se redactó el resumen
de planos en el cual se indicó la distancia recomendable de construcción de obras
civiles a partir del eje del río.
El diseño hidráulico del proyecto se fundamentó en la norma NEVI-12-MTOP;
Volumen Nº2 – Libro B, el Código ecuatoriano de la construcción parte IX obras
sanitarias CO 10.07 – 601 y el manual de hidrología, hidráulica y drenaje del
Ministerio de transportes y comunicaciones del Perú, se ha determinado un período de
retorno de 261 años, un caudal de diseño de 123.18 m3/Sg, una altura máxima de
inundación de 5 metros sobre el nivel del lecho del río y un área de inundación de
44.48 hectáreas.
Description
In this analysis, the data of limnimetric stations with influence in the study area was
collected, processed, selected and excluded , generating the series of flows that was
used in the analysis, the return period was obtained based on the recommendations of
the NEVI -12, the design flow was obtained by means of a goodness-of-fit test of
stochastic projections that relates the methods of probabilistic distribution of Gumbel
and Pearson type III, the coefficient of rugosity of the channel was determined based
on the methods of Cowan and Ven Tee Chow, which data obtained from the field visit
in which relevant information was collected at depths, coverage, and visual
identification of the type of soil present in the riverbed. The topography of the area of
influence was obtained based on the topographic charts in a scale of 1:1000 provided
by the Planning Department of the GAD Municipality of Ambato, then the
mathematical simulation model of the avenue was continued with the Hec-Ras
program, which generated the flood area of the analyzed area, thematic plans were
drawn up and the summary of plans was drawn up in which the recommended distance
of construction of civil works from the river axis was indicated.
The hydraulic design of the project was based on the NEVI-12-MTOP standard;
Volume No. 2 - Book B, the Ecuadorian Construction Code, part IX, Sanitary Works
CO 10.07 - 601 and the Hydrology, Hydraulics and Drainage Manual of the Ministry
of Transport and Communications of Peru, has determined a return period of 261
years, a design flow of 123.18 m3/Sg, a maximum flood height of 5 meters above the
level of the river bed and a flood area of 44.48 hectares.
Keywords
DISEÑO HIDRÁULICO, CAUDALES FLUVIALES, LEVANTAMIENTOS TOPOGRÁFICOS