Estudio comparativo del diseño sismo resistente de una edificación de estructura metálica de cinco pisos con arriostramientos concéntrico y excéntrico en la Unidad Educativa Tres de Marzo
No Thumbnail Available
Date
2023-03
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas
Abstract
The objective of this work was the comparative study of the seismic behavior of buildings
with two bracing systems. In Ecuador there are different zones with seismic danger, for
this reason, recently improvements have been implemented in the design and construction
of steel structure buildings, some of these improvements are the implementation of bracing
systems. Although this practice is very useful to improve the seismic behavior of
buildings, locally its performance is still being studied. In the analysis proposed in this
work, concentric bracing (in X and V) and eccentric bracing (in X and V) were considered
for a specific zone. In order to analyze the seismic behavior of the building, the soilstructure conditions were applied with the characteristics of the Chimbo canton that were
compiled from a soil study, additionally, a basic building was configured, in which the 4
different types of bracings were applied in order to identify if there is a system that presents
a better performance. A Pushover analysis was applied to all configurations to establish
which system provides the best results. Finally, it was identified that the inverted V
bracings provide the building with greater flexibility without the need to compromise its
integrity.
Description
El objetivo del presente trabajo fue el estudio comparativo del comportamiento sísmico de
las edificaciones con dos sistemas de arriostramiento. En el Ecuador existen diferentes
zonas con peligro sísmico, por ese motivo, recientemente se ha ido implementando
mejoras en el diseño y construcción de edificaciones de estructuras metálicas, algunas de
estas mejoras es la implementación de sistemas de arriostramiento. A pesar de que esta
práctica es muy útil para mejorar el comportamiento sísmico de las edificaciones,
localmente aún se está estudiando su funcionamiento. En el análisis planteado en este
trabajo se tomó en cuenta arriostramientos concéntricos (en X y V) y excéntricos (en X y
V) para para una zona específica. Para analizar el comportamiento sísmico de la
edificación se aplicó las condiciones de suelo – estructura con las características propias
del cantón Chimbo que fueron recopiladas de un estudio de suelos, adicionalmente, se
configuró una edificación básica, en esta se aplicaron los 4 diferentes tipos de
arriostramientos para poder identificar si existe un sistema que presente un mejor
desempeño. Se aplicó un análisis Pushover en todas las configuraciones para establecer
qué sistema proporciona mejores resultados. Finalmente, se identificó que los arriostramientos en V invertida brindan a la edificación mayor flexibilidad sin la necesidad
de comprometer su integridad.
Keywords
ARRIOSTRAMIENTOS, CBF, COMPORTAMIENTO SÍSMICO, DESEMPEÑO SÍSMICO, EBF, PUSHOVER