Cálculo de los factores SDS (parámetro de aceleración espectral de diseño), CD (factor de amplificación de deflexión), ω (factor de sobrecarga del sistema), y RHO(factor de redundancia) en base a la norma ecuatoriana y aplicados con el software etabs
No Thumbnail Available
Date
2021-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The following research work aims to calculate the factors SDS, CD, Ω and RHO that
in structural calculations especially in concrete are used by default without taking into
account the affectation that these may have at the time of determining the amount of
steel.
For the determination of these factors, the structural calculation was carried out taking
for this process the DBF method (Design based on forces) and four structural models
were made, the first and second model was carried out following the Ecuadorian
standard NEC 2015 and the US standard ASCE 7 14 respectively and with the factors
that the program presents by default, the third model uses the US standard ASCE 7 14
using the factors indicated there indicated and as the last model the Ecuadorian
standard NEC 2015 is used using a correlation of the factors of the US standard
coupling them to Ecuador to determine what is the change that occurs in the structure.
At the end of the comparison of the structural models it was reached what, the
difference between the amounts of steel, the calculations made by default and those
determined by the standard are 0.01 percent, which does not affect the final modeling.
Description
El siguiente trabajo investigativo tiene por objetivo calcular los factores SDS, CD, Ω
y RHO que en los cálculos estructurales especialmente en los de hormigón se utilizan
por defecto sin tomar en cuenta la afectación que estos pueden tener en el momento de
determinar la cantidad de acero.
Para la determinación de estos factores se realizó el cálculo estructural tomando para
este proceso el método DBF(Diseño basado en fuerzas) y se procedió a realizar cuatro
modelos estructurales, el primer y segundo modelo se lo realizó siguiendo la norma
ecuatoriana NEC 2015 y la norma estadounidense ASCE 7 14 respectivamente y con
los factores que el programa presenta por defecto, el tercer modelo se utiliza la norma
estadounidense ASCE 7 14 utilizando los factores que ésta indica y como último
modelo se utiliza la norma ecuatoriana NEC 2015 utilizando una correlación de los
factores de la norma estadounidense acoplándolos a Ecuador para determinar cuál es
el cambio que se da en la estructura.
Al terminar la comparación de los modelos estructurales se llegó a qué, la diferencia
entre las cuantías de acero, los cálculos realizados por defecto y los determinados
mediante la norma son de 0.01 por ciento, lo que no afecta al modelado final.
Keywords
ASCE 7 14, NEC 2015, ACELERACIÓN ESPECTRAL, DEFLEXIÓN, SOBRECARGA, REDUNDANCIA