Diseño hidráulico de redes principales y parcelarias del sistema de riego por aspersión para mejorar la calidad agricola del sector Chaupiloma II, cantòn Pillaro
No Thumbnail Available
Date
2022-09
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This technical project began with a socialization about the technified irrigation system
since in the community there is the type of gravity irrigation, therefore the project will
benefit the community, it was carried out in the general assembly of the community of
Chaupiloma II Continuing with the process in the second meeting an agreement was
reached with the owners according to the technical specifications and they decide to
accept the semi-fixed irrigation system. Once the approval of the inhabitants was
obtained, data collection began (topographic survey, data from the meteorological
station of the Pisayambo station, etc.), with the aim of starting with the proposed
designs (parcel design and main network).
The parcel design process was continued using the IRRICAD V15 Software,
simultaneously with this process the designs of the main network were made with the
help of the AutoCad Civil 3D Software.
With the plot designs, the diameters of the pipes that would be used, the number of
sprinklers and the shift for each plot were determined, on the other hand, it was
possible to determine with the design of the main network the diameter of the main
pipe taken from the tank. existing reservoir in the area, the design of the sand removal
system and the different accessories. The project was designed with an initial flow of
25.78lt/s, knowing that the sector is divided into three branches, the same as the data
would be the following: Branch 1 (7.65lt/s), Branch (9.46 lt/s) and Branch 3 (8.67lt/s).
Description
En este proyecto técnico se comenzó con una socialización sobre el sistema de riego
tecnificado ya que en la comunidad existe el tipo de riego a gravedad, por lo tanto el
proyecto beneficiara a la comunidad, se realizó en la asamblea general de la comunidad
de Chaupiloma II, continuando con el proceso en la segunda reunión se llego a un
acuerdo con los propietarios de acuerdo a las especificaciones técnicas deciden aceptar
el sistema de riego semifijo. Una vez que se obtuvo la aprobación de los habitantes se
inició la recolección de datos (levantamiento topográfico, datos de la estación
meteorológica de la estación de Pisayambo, etc.), con el objetivo de comenzar con los
diseños propuestos (diseño parcelario y de la red principal).
Se continuo con el proceso de diseño parcelario utilizando el Software IRRICAD V15,
simultáneamente a este proceso se realizaron los diseños de la red principal con la
ayuda del Software AutoCad Civil 3D.
Con los diseños parcelarios se determinaron los diámetros de las tuberías que serían utilizadas,
el número de aspersores y el turnado por cada parcela, por otra parte, se pudo determinar con
el diseño de la red principal el diámetro de la tubería principal tomada desde el tanque
reservorio existente en la zona, el diseño del desarenados y los diferentes accesorios. El
proyecto se diseñado con un caudal inicial de 25.78lt/s, sabiendo que el sector se divide en tres
ramales los mismo que los datos sería los siguientes: Ramal 1 (7.65lt/s), Ramal (9.46 lt/s) y
Ramal 3 (8.67 lt/s).
Keywords
SISTEMA DE RIEGO, RIEGO POR ASPERSIÓN, SISTEMA SEMIFIJO, ACOPLES, TUBERÍAS, ASPERSORES, TURNADOS DE RIEGO