Optimización de respuestas múltiples (DOE/MSR) de propiedades mecánicas del material híbrido de matriz epoxi reforzada con fibra sintética (carbono) y natural (Chambira)
No Thumbnail Available
Date
2022-01
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
Due to the demand that exists today in Materials Engineering, as the days go by, it has
always been sought to help improve the mechanical properties of the new design thus
meeting the user's need.
The specimens were designed under the methodology (DOE / MSR) (Box – Behnken)
which allowed to determine the orientation of the natural fiber, synthetic fiber and the
temperature. The values that were considered were -45, 0, 45 degrees and the
temperature 60, 90, 120 degrees Celsius. With the help of (Box – Behnken) 15 cases
with 3 replicates were determined to determine the mechanical properties.
The results obtained from the three tests were tabulated and it was observed that the
best combination to obtain the optimum material should be performed with
orientation1 45 degrees, orientation2 35 degrees and curing temperature 60 degrees
Celsius and the MSR design regression model explains up to 95.61 percent the
variability of the properties, with an overall desirability value of 0.989.
Description
Por la demanda que existe hoy en día en la Ingeniería de materiales con el pasar de los
días siempre se ha buscado que ayuden a mejorar las propiedades mecánicas del nuevo
a diseñar así cumpliendo con la necesidad del usuario.
Se diseñaron las probetas bajo la metodología (DOE/MSR) (Box–Behnken) los cuales
permitieron determinar la orientación de la fibra natural, fibra sintética y la
temperatura. Los valores que se consideraron fueron -45, 0, 45 grados y la temperatura
60, 90, 120 grados centígrados. Con la ayuda de (Box–Behnken) se determinaron 15
casos con 3 réplicas para determinar las propiedades mecánicas.
Los resultados obtenidos de los tres ensayos se tabularon y se observó que la mejor
combinación para obtener el óptimo material se debería realizar con la orientación1
45, grados, orientación2 35 grados y temperatura de curado 60 grados centígrados y el
modelo de regresión de diseño MSR explica hasta el 95,61 por ciento la variabilidad
de las propiedades, con un valor de deseabilidad global de 0,989.
Keywords
FIBRA NATURAL, FIBRA SINTÉTICA, MSR, BOX BEHNKEN, DOE