Análisis comparativo del uso de escoria de siderurgia para la estabilización de suelo
No Thumbnail Available
Date
2020
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The present experimental project aims to stabilize different types of soil of different
properties by adding steel slag. Sample # 1 sandy silt soil was subtracted from the
Pilisurco province of Tungurahua, sample # 2 clay soil was subtracted from the
parish Murialdo province of Pastaza, sample # 3 steel slag was stolen from Canton
Ambato. Once the sample and the place were identified, samples were taken from
each type of soil.
The necessary tests were carried out to establish the type, property and characteristics
of each soil. A granulometric analysis and test for the determination of the Atterberg
limits were performed to identify the type of soil according to the tables established
by the Unified Soil Classification System (SUCS).
The Type D Modified Proctor test was run to determine the CBR soil support
capacity (California Support Ratio) which gives results of each sample tested as the
maximum dry density and the optimum humidity for them to proceed with the CBR
test. These tests were carried out with the soil combination plus three percentages 8,
10 and 35% of steel slag. These samples were submerged in water for three days to
analyze the sponge generated by each type of soil with the combination with steel
slag.
For this comparative analysis, the properties and characteristics of the samples were
evaluated, such as their moisture content, plasticity and support capacity, which were
statistically analyzed with different combinations, resulting in an ideal alternative in
which the steel slag It can be used to improve soil properties and its use as a
subgrade.
Description
El presente proyecto experimental tiene como objetivo estabilizar diferentes tipos de
suelo de distintas propiedades mediante la adición de escoria de siderurgia. La muestra
número 1 suelo limo arenoso se sustrajo del Pilisurco provincia de Tungurahua, la
muestra número 2 suelo arcilla se sustrajo de la parroquia Murialdo provincia de
Pastaza, la muestra número 3 escoria de siderurgia se sustrajo del cantón Ambato. Una
vez identificada la muestra y el lugar se procedió a extraer muestras de cada tipo de
suelo.
Se realizaron los ensayos necesarios para establecer tipo, propiedad y características
de cada suelo. Se realizó un análisis granulométrico y ensayo para la determinación de
los límites de Atterberg para identificar el tipo de suelo según las tablas establecidas
por el Sistema Unificado de Clasificación de Suelos (SUCS).
Se ejecutó el ensayo Proctor Modificado tipo D para determinar la capacidad de
soporte del suelo CBR (Relación de Soporte California) el cual da resultados de cada
muestra ensayada como la densidad seca máxima y la humedad óptima para con ellos
proceder a realizar el ensayo CBR. Estos ensayos se realizaron con la combinación
suelo más tres porcentajes 8, 10 y 35 por ciento de escoria de siderurgia. Éstas muestras
fueron sumergidas en agua durante tres días para analizar el esponjamiento que genera
cada tipo de suelo con la combinación con escoria de siderurgia.
Para este análisis comparativo se evaluó las propiedades y características de las
muestras como su contenido de humedad, plasticidad y capacidad de soporte, las
mismas que fueron analizadas de manera estadística con diferentes combinaciones,
dando como resultado una alternativa idónea en la cual la escoria de siderurgia pueda
ser utilizada para mejorar las propiedades del suelo y su uso como sub rasante.
Keywords
ANÁLISIS COMPARATIVO, ESCORIA DE SIDERURGIA, ESTABILIZACIÓN DE SUELO