Obtención de un material biodegradable y elaboración de un vaso a partir de almidón de maíz
No Thumbnail Available
Date
2022-06
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
In this technical project the process for obtaining sheets of the biodegradable material
was detailed, tests were carried out to give a final use to the material with the
manufacture of glasses.
To obtain the corn starch, the tender corn was soaked for eight hours, to give way to
washing and wet grinding, the result was left at rest for 24 hours, the starch settling to
remove water and residues, the starch was left to rest to that the remaining humidity is
eliminated and when it dries to obtain cornstarch.
The process for the manufacture of corn starch sheets was achieved with the mixture
of tender corn starch, adding binders, glycerin, acetic acid, distilled water and heating
it until obtaining a uniform casting.
The samples obtained were sent to the laboratories for tensile, flammable and hardness
tests, with the data the properties table for the vegetable plastic cup based on corn
starch was presented. To produce the cup, a design of the glass was implemented using
CAD software and the development of a mold for injection of the material.
It concluded with the delivery of the technical sheet which includes the description of
the product, applications and technical data such as the combustion rate which is
117,43 mm / min, a shore hardness D 73.85 maximum effort at the tensile 16,85 MPa,
modulus of elasticity 756,439 MPa with a percentage of elongation 3.60 percent.
Description
En el presente proyecto técnico se detalló el proceso para la obtención de láminas del
material biodegradable, se realizaron pruebas para darle un uso final al material con la
fabricación de vasos.
Para la obtención del almidón de maíz se remojo el maíz tierno durante ocho horas,
para dar paso al lavado y molienda húmeda, el resultado se dejó en reposo durante 24
horas sedimentando el almidón para retirar el agua y residuos, el almidón se deja
reposar para que se elimine la humedad restante y al secarse obtener almidón de maíz.
El proceso para la fabricación de láminas de almidón de maíz se consiguió con la
mezcla de almidón de maíz tierno, añadiendo aglutinantes, glicerina, ácido acético,
agua destilada y calentándola hasta lograr una colada uniforme.
Las muestras obtenidas se enviaron a los laboratorios para los ensayos de tracción,
inflamabilidad y dureza, con los datos se presentó la tabla de propiedades para el vaso
plástico vegetal en base de almidón de maíz. Para la producción del baso se
implementó un diseño del vaso mediante un software CAD y el desarrollo de un molde
para inyección del material.
Se concluyó con la entrega de la ficha técnica en la que se incluye la descripción del
producto, aplicaciones y datos técnicos como la tasa de combustión que es de 117,43
mm/min, una dureza shore D 73,85 esfuerzo máximo a la tracción 16,85 MPa, módulo
de elasticidad 756,439 MPa con un porcentaje de elongación 3,60 por ciento.
Keywords
MATERIAL BIODEGRADABLE, ALMIDÓN DE MAÍZ, PLÁSTICO VEGETAL, VASO DESECHABLE, MOLDE DE INYECCIÓN