Análisis de las correlaciones entre el Cbr, Dcp, propiedades índice y mecánicas en suelos de la parroquia Belisario Quevedo, cantón Latacunga, provincia de Cotopaxi
No Thumbnail Available
Date
2023-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The California Bearing Ratio (CBR) is the most widely used parameter for sizing
flexible pavements worldwide; however, performing this assay is time consuming and
has significant costs. To simplify this, a simple and multiple regression analysis was
considered through the existing correlations between the index and mechanical
properties of twelve representative samples of the study areas; taking into
consideration for this, field tests (DCP, Field density) and laboratory tests (Natural
Humidity, Granulometry, Atterberg Limits, Specific Gravity, CBR, Modified Proctor).
In the analysis of results, the soils studied were classified as sandy with the presence
of silt according to the SUCS and the ASSHTO; In the same way, correlations and
simple linear regressions were integrated with a polynomial trend of degree two and
multiple correlations, with the dispersion of results obtained from the previously
mentioned tests. Twenty-two correlations were obtained, of which 54.55 percent of the
results presented a coefficient of determination greater than 0.50, 40.90 percent
showed values greater than 0.60, and only 4.55 percent showed a value of 0.36.
However, the correlation determined through the higher CBR variables from an
exponential formula was compared explicitly with the DCP according to ASTM
D6951. Subsequently, the design of flexible pavements for the laboratory CBR and
the calculated CBR was carried out.
Description
El California Bearing Ratio (CBR) es el parámetro más utilizado para dimensionar
pavimentos flexibles mundialmente; sin embargo, realizar este ensayo conlleva mucho
tiempo y presenta costos significativos. Para simplificar esto se consideró un análisis
de regresión simple y múltiple a través de las correlaciones existentes entre las
propiedades índice y mecánicas de doce muestras representativas de las zonas de
estudio; tomando en consideración para ello, ensayos de campo (DCP, Densidad de
campo) y ensayos de laboratorio (Humedad Natural, Granulometría, Límites de
Atterberg, Gravedad Específica, CBR, Proctor Modificado). En el análisis de
resultados lo suelos estudiados se clasificaron como arenosos con presencia de limo
según la SUCS y la ASSHTO; de igual manera, se integró correlaciones y regresiones
lineales simples con una tendencia polinómica de grado dos y correlaciones múltiples,
con la dispersión de resultados obtenidos de los ensayos mencionados anteriormente.
Se obtuvieron veinte y dos correlaciones de las cuales el 54. 55 por ciento de los
resultados presentaron un coeficiente de determinación mayor a 0.50, el 40.90 por
ciento mostraron valores mayores a 0.60 y apenas en el 4.55 por ciento se observó un
valor de 0.36. No obstante, se comparó explícitamente la correlación determinada a
través de las variables de CBR mayor a partir de una fórmula exponencial con el DCP
según la normativa ASTM D6951. Posteriormente se realizó el diseño de pavimentos
flexibles para el CBR de laboratorio y el CBR calculado.
Keywords
CORRELACIONES, PROPIEDADES ÍNDICE, PROPIEDADES MECÁNICAS, COEFICIENTE DE DETERMINACIÓN, CBR, DCP