Evaluación de la planta de tratamiento de aguas residuales de la comunidad Rumipamba, parroquia Rumipamba, cantón Quero, provincia de Tungurahua
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
In the present experimental work, an Evaluation of the PTAR was carried out in order
to verify if it complies with the standards of functionality and efficiency in its
processes. The initial works carried out in the treatment plant of the Community began
with a tour of the site where the current facilities were known and inspected, then
began with a topographic survey that revealed the current state of the treatment plant,
for this process a drone was used for the respective aerial photo and a total station to
raise the information of the system. Once the field work was finished, the measurement
of both inlet and outlet flows was carried out using the volumetric method, during the
7 days for two weeks, in order to determine the day with the highest influx and to know
the maximum and minimum flows with which the WWTP works. Once the effluent
measurement intakes were completed, the sampling of the inlet and outlet flows was
carried out, which were sent to be analyzed in the laboratories of the UNACH,
knowing the result of the analysis parameters, we proceeded to compare the polluting
loads that are treated in the plant with the parameters of permitted discharge of
wastewater in freshwater bodies.
Description
En el presente trabajo experimental se realizó una Evaluación de la PTAR con el objeto
de verificar si cumple con los estándares de funcionabilidad y eficiencia en sus
procesos. Los trabajos iniciales realizados en la planta de tratamiento de la Comunidad
comenzaron con un recorrido del sitio donde se conoció y se inspecciono las
instalaciones actuales, luego se comenzó con un levantamiento topográfico que dio a
conocer el estado actual de la planta de tratamiento, para este proceso se utilizó un
dron para la respectiva foto aérea y una estación total para levantar la información del
sistema. Una vez que se terminó con el trabajo de campo se realizó la medición de
caudales tanto de entrada como salida utilizando el método volumétrico, durante los 7
días por dos semanas, con el objeto de determinar el día con mayor afluencia y conocer
los caudales máximos y mínimos con los que trabaja la PTAR. finalizadas las tomas
de medición de los efluentes, se realizó el muestreo de los caudales de entrada y salida,
las mismas que se enviaron a ser analizadas en los laboratorios de la UNACH,
conocido el resultado de los parámetros de análisis, se procedió a comparar las cargas
contaminantes que se tratan en la planta con los parámetros de descarga permitidos de
aguas residuales en cuerpos de agua dulce.
Keywords
PLANTA DE TRATAMIENTO, AGUA RESIDUAL, TANQUE SÉPTICO, SECADO DE LODOS, FILTRO BIOLÓGICO