Caracterización de la flamabilidad de los materiales de revestimiento utilizados en construcción, ensayados a borde
No Thumbnail Available
Date
2024-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The new coating techniques have been used significantly in constructions, in such a way that their
behavior against fire has not been considered, which raises questions regarding fire events.
From the above, this investigative work was developed on fire reaction tests of construction
materials such as Gypsum/ceiling and melamine subjected to the direct action of the fire flame
according to the NTE INEN-ISO 11925 standard. 2, for which the physical properties of each
material were analyzed and subsequently tested on edge for 30 seconds. In addition, a total of 36
samples were obtained, taking into account 18 specimens of each material with their 3 respective
thicknesses, and 3 sectioned longitudinally and 3 transversely, in order to know if the direction of
application of the material influences the its flammability.
As a result, it was obtained that the melamine materials present an initial ignition, which does not
occur with the Gypsum/ceiling materials. It was also evident that the vertical propagation of the
flame does not reach the height of 150mm, consequently according to the behavior against the fire
and according to the physical properties, each material was classified according to the EN 13501-
1 standard, where Gypsum/ceiling was categorized in class type C, and melamine in class type D,
highlighting that all these materials for the production of smoke It is class type S3 and for the fall
of inflamed droplets/particles it is class type D2.
Description
Las nuevas técnicas de revestimiento han sido empleadas de manera significativa en las
construcciones, de tal forma que no se ha considerado su comportamiento frente al fuego, lo cual
genera interrogantes frente a eventos de incendio.
A partir de lo mencionado, se desarrolló el presente trabajo investigativo de ensayos de reacción al
fuego de los materiales de construcción tales como Gypsum/cielo raso y melamina sometidos a la
acción directa de la llama de fuego según la normativa NTE INEN-ISO 11925-2, para lo cual se
analizó las propiedades físicas de cada material para posteriormente ensayarlos a borde durante 30
segundos. Además, se obtuvo un total de 36 muestras, teniendo en cuenta 18 probetas de cada
material con sus 3 respectivos espesores; y seccionadas, 3 en forma longitudinal y 3 en sentido
transversal, con la finalidad de conocer si el sentido de aplicación del material influye en su
flamabilidad.
Como resultado se obtuvo que los materiales de melamina presentan una ignición inicial, lo que no
ocurre con los de Gypsum/cielo raso. Además, se evidenció que la propagación vertical de la llama
no alcanza la altura de 150mm, consecuentemente de acuerdo con el comportamiento frente al
fuego y según las propiedades físicas se clasificó cada material según la norma EN 13501-1, en
donde se categorizó al Gypsum/cielo raso en clase tipo C, y la melamina en clase tipo D, resaltando
que todos estos materiales para la producción de humo es clase tipo s3 y para la caída de
gotas/partículas inflamadas es clase tipo d2.
Keywords
GYPSUM, MELAMINA, ACONDICIONAMIENTO, FLAMABILIDAD, REACCIÓN AL FUEGO, IGNICIÓN, PROPAGACIÓN