Diseño y construcción de un giroscopio para el Laboratorio de Física de la Carrera de Mecánica de la Universidad Técnica de Ambato
No Thumbnail Available
Date
2023-03
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
This project presents the need to offer the opportunity to carry out the experimentation
practices and mandatory regulatory tests that the educational, productive, industrial and
reseach sectors of the province and the country currently require. Reinforcing teaching so
that students can gain a better understanding of the physical laws governing gyroscopes.
The present reseach project focused on the design and costruction of a gyroscope, for
which the corresponding studies were carried out regarding the appropriate dimensions of
the device according to the place where it will be located and the designs available in the
market, afterwards the designs was carried out in a mechanical modeling software, then
the analytical design calculations were performed to verify that the device resists without
suffering material fatigue failures due to the forces exerted by it. Once verified, we
proceeded the construction of each of the constituent elements of the gyroscope to finally
assemble it.
At the end of the assembly, the corresponding tests were carried out to verify its correct
operation in order to deliver it to the Physics Laboratory of the Technical University of
Ambato.
Description
En el presente proyecto se presenta la necesidad de ofrecer la oportunidad de realizar
prácticas de experimentación y ensayos normativos obligatorios que el sector educativo,
productivo industrial e investigativo de la provincia y del país actualmente requieren.
Reforzando la enseñanza y que así los estudiantes puedan lograr una mejor comprensión
de las leyes físicas que rigen los giroscopios.
El presente proyecto investigativo se enfocó en el diseño y construcción de un giroscopio
para lo cual se efectuaron los estudios correspondientes con respecto a las dimensiones
adecuadas del dispositivo en función del lugar donde será ubicado y los diseños
disponibles en el mercado, posteriormente se procedió a realizar el diseño en un software
para modelado mecánico, a continuación se realizaron los cálculos analíticos de diseño
para verificar que el dispositivo resista sin sufrir fallas por fatiga del material debido a las
fuerzas que ejerce el mismo. Una vez verificado se procedió a la construcción de cada uno
de los elementos constituyentes del giroscopio para finalmente ensamblarlo.
Al finalizar el ensamblaje se realizaron las pruebas correspondientes verificando su
correcto funcionamiento para así entregarlo al Laboratorio de Física de la Universidad
Técnica de Ambato.
Keywords
GIROSCOPIO, DISEÑO MECÁNICO, MODELADO MECÁNICO, EXPERIMENTACIÓN, FATIGA