Análisis de las propiedades mecánicas, tracción paralela a la fibra y flexión perpendicular a la fibra de la madera de capulí, proveniente de la provincia de Tungurahua y su factibilidad como material estructural de acuerdo con la norma ecuatoriana de la construcción 2015 (NEC 2015)
No Thumbnail Available
Date
2023-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This research seeks to provide information on the use of capulí wood from the cantons
of Ambato, Cevallos, Mocha, Pelileo, Santiago de Píllaro, Quero and Tisalelo, as a
structural material in construction.
This experimental work complies with the parameters established in the standards
ASTM D143-94, ASTM D198, NTE INEN 896 and NEC-SE-MD 2015, from which
samples of green or freshly cut wood were extracted and specimens of capulí wood
with a natural drying process were elaborated. By means of physical tests, the moisture
content in the dry and green state was determined, and by means of mechanical tests,
the modulus of elasticity and admissible stress were determined. In addition, the results
obtained in each canton were used to create load vs. deformation graphs; stress vs. unit
deformation; comparative tables of the results obtained and zoning maps.
Based on the analysis carried out on 84 capulí wood specimens, it was determined that
capulí wood can be used as a structural material, since it presented representative
values in the mechanical tests carried out, being the wood from the Ambato canton the
one that showed a higher resistance to both parallel traction and static bending.
Description
La presente investigación busca suministrar información sobre el empleo de la madera
de capulí procedente de los cantones, Ambato, Cevallos, Mocha, Pelileo, Santiago de
Píllaro, Quero y Tisalelo, como material estructural en el ámbito constructivo.
Este trabajo experimental cumple con los parámetros establecidos en las normativas
ASTM D143-94, ASTM D198, NTE INEN 896 y NEC-SE-MD 2015, de la cual se
extrajo muestras de madera verde o recién cortada y se elaboró probetas de madera de
capulí con un proceso de secado natural. Por medio de ensayos físicos, se determinó
el contenido de humedad en estado seco y verde, y mediante ensayos mecánicos se
determinó el módulo de elasticidad y el esfuerzo admisible. Además, con los resultados
obtenidos en cada cantón se realizaron los gráficos carga vs deformación; esfuerzo vs
deformación unitaria; tablas comparativas de los resultados obtenidos y mapas de
zonificación.
En base al análisis efectuado en 84 probetas de madera de capulí, se determinó que la
madera de capulí puede ser empleada como material estructural, ya que presentó
valores representativos en los ensayos mecánicos realizados, siendo la madera
procedente del cantón Ambato la que demostró una mayor resistencia, tanto a tracción
paralela como a flexión estática.
Keywords
CAPULÍ, PROPIEDADES MECÁNICAS, PROPIEDADES FÍSICAS, FLEXIÓN ESTÁTICA, TRACCIÓN PARALELA, HUMEDAD VERDE, HUMEDAD SECA