Influencia de la exposición a la intemperie en el desgaste de un material compuesto de látex y partículas de gránulo de caucho reciclado
No Thumbnail Available
Date
2021-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
The development of this research is focused on the material composed of the matrix
of latex and recycled rubber granule particles (PGCR) as reinforcement, since this
composite has optimal peculiarities for the elaboration of floors. For the development
of this study, the variation in the percentage of reinforcement was taken into account
in such a way that, it is possible to show which of the volumetric configurations has
the best properties of Wear and Hardness. The tests were applied according to the
specifications of the wear standard ISO 9352, Hardness ASTM- D2240 and ASTM D
1435 for outdoor exposure.
Through the application of experiment design (DOE), a complete overall factorial
design was made from which six volumetric configurations were obtained with a
reinforcement variation of twenty, thirty and forty percent. The material behaviour was
then analysed using the Taber wear test, measuring Shore D hardness using ISO and
ASTM standards respectively.
At the end of the execution of the tests by means of tables and graphs it is evident that
the percentage of wear for the three reinforcement variations is minimal, yet the
statistical analysis shows that the exposure time has an influence on the wear rate and
that the volumetric configuration that best fits a real flooring application is 80 percent
Latex (matrix) and 20 percent PGCR (reinforcement) , at zero days of exposure as it
has less wear and greater hardness.
Description
El desarrollo de la presente investigación está enfocado en el material compuesto por
la matriz de látex y partículas de gránulo de caucho reciclado (PGCR) como refuerzo,
ya que este composite tiene particularidades óptimas para la elaboración de pisos. Para
el desarrollo de este estudio se tomó en cuenta la variación del porcentaje de refuerzo
de tal manera que, se permita evidenciar cuál de las configuraciones volumétricas
presenta mejores propiedades de Desgaste y Dureza. Los ensayos fueron aplicados
según las especificaciones de la norma de desgaste ISO 9352, Dureza ASTM- D2240
y ASTM D 1435 para la exposición a la intemperie.
A través de la aplicación de diseño de experimentos (DOE), se realizó un diseño
factorial general completo del cual se obtuvieron seis configuraciones volumétricas
con una variación de refuerzo de veinte, treinta y cuarenta por ciento. Seguidamente
se analizó el comportamiento del material aplicando el ensayo de desgaste Taber, la
medición de la dureza Shore D empleando las normas ISO y ASTM respectivamente.
Al término de la ejecución de los ensayos mediante tablas y gráficos se evidencio que
el porcentaje de desgaste para las tres variaciones de refuerzo es mínimo, a pesar de
ello el análisis estadístico demuestra que el tiempo de exposición tiene influencia sobre
la tasa de desgaste y que la configuración volumétrica que mejor se ajusta a una
aplicación real de pisos es la de 80 por ciento Látex (matriz) y 20 por ciento PGCR
(refuerzo), a cero días de exposición ya que posee menor desgaste y mayor dureza.
Keywords
MATERIAL COMPUESTO, CAUCHO RECICLADO, DESGASTE, ABRASÍMETRO, ANÁLISIS ESTADÍSTICO, RECICLAJE DE CAUCHO, NEUMÁTICOS USADOS, ENSAYOS DE ABRASIÓN