Análisis y diseño estructural de una “cubierta tipo” de bambú, para canchas de uso multiple mediante el uso de los programas Revit, Robot y Etabs.
No Thumbnail Available
Date
2019
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Abstract
In order to comply with the research objective, it was necessary in the first instance to
define the appropriate geometric configuration of the structure, modeling and
analyzing different configurations in the ETABS program, until, the configuration of
the cover structure meets the period of vibration, floor drifts of less than 2% and that
the participation of the masses is greater than 90%.
Defined the geometry and structural configuration of the roof, it was also modeled in
the Robot Structure Analysis program in order to perform a comparative analysis
between the results presented by each of the programs and verify if they are similar,
that they comply with the aforementioned checks. and to determine the soliciting
efforts in each of the bamboo structural elements. Once the compression, traction,
requesting moment and shear stress efforts to which the bamboo elements were
subjected, obtained from the ETABS and Robot programs, were determined, the final
Guadua GaK sections of the structure were designed by the method of permissible
efforts, based on the NEC_SE_GUADUA and NSR-10 Cap. G.12., Since, the
specialized programs of structural analysis do not contain norms referring to the design
of bamboo structures.
To conclude with the research, the three-dimensional representation and modeling of
the structure was carried out in the Revit specialized program.
Description
Para cumplir con el objetivo de la investigación, fue necesario en primera instancia,
definir la configuración geométrica adecuada de la estructura, modelando y analizando
diferentes configuraciones en el programa ETABS, hasta que, la configuración de la
estructura de cubierta cumpla con los chequeos período de vibración, derivas de piso
menores al 2% y que la participación de las masas sea mayor al 90%.
Definida la geometría y configuración estructural de la cubierta, ésta fue modelada
también en el programa Robot Structure Analysis con el fin de realizar un análisis
comparativo entre resultados presentados por cada uno de los programas y verificar si
estos son similares, que cumplan con los chequeos mencionados y para determinar los
esfuerzos solicitantes en cada uno de los elementos estructurales de bambú. Una vez
determinados los esfuerzos de compresión, tracción, momento solicitante y esfuerzo
cortante a los que los elementos de bambú estaban sometidos, obtenidos de los
programas ETABS y Robot, se procedió a diseñar las secciones definitivas de Guadua
GaK de la estructura por el método de esfuerzos admisibles, basados en la normativa
NEC_SE_GUADUA y NSR-10 Cap. G.12., ya que, los programas especializados de
análisis estructural no contienen normas referentes al diseño de estructuras de bambú.
Para concluir con la investigación se realizó la representación y modelación
tridimensional de la estructura en el programa especializado Revit.
Keywords
BAMBÚ, DISEÑO ESTRUCTURAL, CANCHAS DE USO MÚLTIPLE, REVIT, ROBOT, ETABS, MÓDULO DE CORTE, MÓDULO DE ELASTICIDAD