Influencia de la mampostería de relleno en el comportamiento de un pórtico de estructura metálica sometido a carga lateral
No Thumbnail Available
Date
2019
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Abstract
In this project the behavior of a steel frame subjected to lateral forces was analyzed
and a comparative table was established with the same frame but filled with
masonry, the mathematical representation established by FEMA was used for the
analysis of the structural behavior. The frame to be analyzed was established,
modeling was carried out for the finite element program ETABS, after the analysis
called "Pushover" was carried out in order to analyze its behavior under lateral
forces, the rigidity of the frame was established, maximum lateral load, maximum
deformation of the frame, element that absorbs the highest value of shear and
mechanism of failure of the frame. 63 frames models were established with
different masonry representations that caused a change in structural behavior when
subjected to the same Pushover analysis.
The results showed a marked difference between the analysis without masonry and
the one that had a masonry representation, pathologies and structural behaviors not
expected in the previous analysis were visualized, reason why this study concluded
that in order to analyze with greater fidelity the behavior of structures it is
indispensable the representation of the masonry or a reengineering of the
constructive system.
Description
En el presente proyecto se analizó el comportamiento de un pórtico de acero
sometido a carga lateral y se estableció un cuadro comparativo con el mismo
pórtico, pero rellenado con mampostería, se utilizó la representación matemática
establecida por FEMA para el análisis del comportamiento estructural. Se
estableció el pórtico a someterse a carga lateral, se realizó la modelación en el
programa de elementos finitos ETABS, luego de lo cual se realizó el análisis
llamado “Pushover” para interpretar su comportamiento bajo cargas laterales, se
estableció la rigidez del pórtico, carga lateral máxima, deformación máxima del
pórtico, elemento que absorbe el mayor valor de cortante y mecanismo de falla del
pórtico. Se estudió 63 modelos de pórticos con diferentes representaciones de
mampostería que ocasionaron un cambio en el comportamiento estructural al
someterse al mismo análisis Pushover.
Los resultados mostraron una marcada diferencia entre el análisis sin mampostería
y el que tenía una representación de mampostería, se visualizó patologías y
comportamientos estructurales no esperados en el análisis previo, por lo que este
estudio concluyó que para poder analizar con mayor fidelidad el comportamiento
de una estructura es indispensable la representación de la mampostería o una
reingeniería del sistema constructivo.
Keywords
MAMPOSTERIA, PÓRTICO DE ESTRUCTURA, RÓTULAS PLÁSTICAS, MODOS DE FALLA, PUNTAL EQUIVALENTE, COLUMNAS, RÍGIDEZ DEL PÓRTICO, COLUMNAS, VIGAS, ACERO