Diseño y construcción de una prótesis de dedo de mano con amputación del falange distal para la empresa Dicoval ubicado en la ciudad de Ambato
No Thumbnail Available
Date
2023-03
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
There is a large number of workers who have suffered a work accident in most companies,
phalangeal and transphalangeal amputations are common, this is the case of the Dico-Val
company, where a few years ago a worker suffered an accident where he lost part of his
finger specifically the distal phalanx, in this way, obtaining a prosthesis in order to
recover the physical capacity of the workers becomes imperative; For this reason, the
present investigation of analysis of alternative mechanisms proposes the design of a
prosthesis of mechanical drive of the distal phalanx of the hand using bibliographic
information and analyzing different types of prostheses; Comparison analysis of 3D
printing materials was carried out, a comparative study was carried out between the
design applications and laminators required for the use of 3D printing, different types of
prostheses were analyzed focused on the selection of alternatives of the type of
mechanism, the which helps with flexion and extension movements, and the type of
material for design parameters. Finally, the results were positive since the efforts were
obtained from the computational verification; reaching the conclusion that a functional
prosthesis was obtained and the selected 3D printing material (PLA) provided sufficient
resistance so that the prosthesis could perform prehension actions.
Description
Existe una gran cantidad de operarios que han sufrido un accidente laboral en la mayoría de
empresas es común la amputaciones falángicas y transfalángicas es el caso de la empresa
Dico-Val, donde hace algunos años un trabajador sufrió un accidente en donde perdió parte
del dedo específicamente la falange distal, de esta manera, la obtención de una prótesis con
el fin de recuperar la capacidad física de los trabajadores se vuelve imperativa; Por ello, la
presente investigación de análisis de alternativas de mecanismos propone el diseño de una
prótesis de accionamiento mecánico de falange distal de la mano utilizando información
bibliográfica y analizando diferentes tipos de prótesis; se realizaron análisis de comparación
de materiales de impresión 3D, se realizó un estudio comparativo entre las aplicaciones de
diseño y laminadoras requeridas para el uso de la impresión 3D, se analizaron diferentes tipos
de prótesis enfocado a la selección de alternativas del tipo de mecanismo, el que ayuda con
movimientos de flexión y extensión, y el tipo de material para los parámetros de diseño.
Finalmente, los resultados fueron positivos ya que los esfuerzos se obtuvieron de la
verificación computacional; llegando a conclusión que se obtuvo una prótesis funcional y el
material de impresión 3D seleccionado (PLA) proporcionó la resistencia suficiente para que
la prótesis pudiera realizar acciones de prehensión.
Keywords
FALANGE DISTAL, PRÓTESIS DE DEDO, MECANISMO,, FLEXIÓN Y EXTENSIÓN, PREHENSIÓN, ANTROPOMETRÍA, ANÁLISIS CINEMÁTICO