Modelo numérico de formación de cordón y distribución de calor en la soldadura de pases de revenido para el proceso de reparación de un rodete tipo PELTON
No Thumbnail Available
Date
2021-06
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Mecánica Mención Manufactura
Abstract
The present research work is based on the calculation of the temperature inherent to
the welding cycle of the Pass Pass Reheat, a process used for the recovery of Pelton
Impellers. This temperature established by the welding parameters such as voltage,
amperage and travel speed are crucial for the thermally affected zone, which can
change its microstructure and increase its hardness.
Four experiments have been carried out in which the welding parameters were
combined, and the temperature and hardness were calculated. The hardness was
checked by testing and the temperature was checked by finite element analysis
software.
By means of calculations, computational modeling and experimentation, it was
determined that the microstructure obtained in the HAZ is tempered martensite, and
that the hardness value is similar to that of the base material, providing functionality
to the impeller. Additionally, a temperature comparison was performed to confirm that
the analysis point is far from the welding source.
Description
El presente trabajo de investigación se basa en el cálculo de la temperatura inherente
al ciclo de soldadura de Pases de Revenido, proceso utilizado para la Recuperación de
Rodetes Pelton. Dicha temperatura establecida por los parámetros de soldadura como
Voltaje, Amperaje y velocidad de recorrido son cruciales para la Zona Térmicamente
Afectada, misma que puede cambiar su microestructura y aumentar su dureza.
Se han realizado cuatro experimentos en los cuales se combinaron los parámetros de
soldadura, y se calculó la temperatura y dureza. La dureza fue comprobada mediante
ensayo y la temperatura por medio de un software para análisis por elementos finitos.
Mediante los cálculos, modelado computacional y experimentación se determinó que
la microestructura obtenida en la ZAT es martensita revenida, y que el valor de la
dureza es similar al del material base, brindando funcionalidad al rodete.
Adicionalmente se realiza la comparación de las temperaturas conforme el punto
análisis se aleja de la fuente de soldadura.
Keywords
ZAT, CICLO DE SOLDADURA, ACERO INOXIDABLE MARTENSÍTICO, METALURGIA