Correlación entre el CBR, DCP y las propiedades índice y mecánicas en los suelos de las parroquias: La Matriz y Pinguilí del cantón Mocha, provincia de Tungurahua
No Thumbnail Available
Date
2021-09
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This research refers to the soil analysis of the Mocha Canton, through the correlations
of the California Bearing Ratio (CBR), Dynamic Cone Penetration (DCP), Modified
Proctor, Liquid Limit, Plastic Limit, Granulometry, Specific Gravity, Density of Field,
which allow us to know the index and mechanical properties of the soil.
Once the sectors to be analyzed were identified, 6 routes were established for their
analysis, obtaining two altered samples, making pits of 1.00m by 1.00m of variable
depth at a distance greater than approximately 500m.
In situ and laboratory tests were carried out, and based on the results obtained, 25
correlations were achieved between the different variables, applying statistical
methods of simple regression and least squares, with a range of the coefficient of
determination between 51 and 95 percent. considering themselves reliable.
Finally, the flexible pavement was designed, using the CBR determined in the
laboratory, and also the CBR calculated through correlations, obtaining the same
thicknesses in both cases, confirming the reliability of the correlations made.
Description
La presente investigación hace referencia al análisis de suelo del Cantón Mocha,
mediante las correlaciones de los ensayos California Bearing Ratio (CBR), Penetración
Dinámica de Cono (DCP), Proctor Modificado, Límite Líquido, Límite Plástico,
Granulometría, Gravedad Específica, Densidad de Campo, que nos permiten conocer las
propiedades índice y mecánicas del suelo.
Una vez identificados los sectores a ser analizados, se establecieron 6 vías para su
análisis, obteniendo dos muestras alteradas, realizando calicatas de 1.00m por 1.00m de
profundidad variable a una distancia mayor a 500m aproximadamente.
Se realizaron los ensayos in situ y de laboratorio, y en base a los resultados obtenidos se
consiguieron 25 correlaciones entre las distintas variables, aplicando métodos
estadísticos de regresión simple y mínimos cuadrados, con un rango del coeficiente de
determinación entre 51 y 95 por ciento, considerándose confiables.
Finalmente se diseñó el pavimento flexible, utilizando el CBR determinado en el
laboratorio, y también el CBR calculado mediante correlaciones, obteniendo los mismos
espesores en ambos casos, confirmando la confiabilidad de las correlaciones realizadas.
Keywords
ENSAYOS DE SUELO, DCP, CBR, PROPIEDADES ÍNDICE, PROPIEDADES MECÁNICAS, CORRELACIÓN, PAVIMENTO FLEXIBLE, MOCHA