Diseño hidráulico de la conducción y descarga de los remanentes del óvalo Frutillar de la junta de aguas Chacón Sevilla, sector Izamba, cantón Ambato, provincia Tungurahua
No Thumbnail Available
Date
2023-03
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This technical project presents the need to direct the flow efficiently, due to the fact
that the current state of the irrigation canal of the study branch has intervened in the
behavior of the flow due to the fact that weeds, mud and sediments have been a
problem for the 25 direct users of the sector.
In the present project, a topographical survey was carried out, to later translate it into
a computer software, to demonstrate the profile of the terrain, the slopes that depended
on the unevenness of the heights were analyzed, separating by sections, the critical
slopes were defined and the slopes were determined. types of flow in each zone. Once
the previous studies were obtained to verify the feasibility of the project, the concrete
channel was designed, taking into account the conditions covered by the project, a
trapezoidal section was chosen, this using the H-CHANNEL software, thus
determining all the elements geometric structures, then a computational tool was used
for the hydraulic calculation of structures thanks to its graphic display of data and
results, based on the calculation of the normal depth, critical depth, hydraulic jump,
backwater curves, the design of rapids or hydraulic drops.
The documents will be presented to the Chacón Sevilla Irrigation Board, so that it
makes the appropriate use for the benefit of the users, together with the study and
design, the water analysis and the admissible quality criteria governed by Table 3 of
Book VI of the Unified Text Secondary Legislation, Environment, TULSMA.
Description
Este proyecto técnico presenta la necesidad de dirigir el caudal de manera eficiente,
debido a que el estado actual del canal de riego del ramal de estudio ha intervenido en
el comportamiento del flujo debido a que la maleza, fango y sedimentos, han sido una
problemática para los 25 usuarios directos del sector.
En el presente proyecto se realizó un levantamiento topográfico, para luego plasmarlo
en un software computacional, para evidenciar el perfil del terreno, se analizaron las
pendientes que dependieron de los desniveles de las cotas, separando por tramos se
definieron las pendientes críticas y se determinaron los tipos de flujo en cada zona.
Una vez obtenido los estudios previos para verificar la factibilidad del proyecto se
procedió a diseñar el canal de hormigón, teniendo en cuenta las condiciones que abarcó
el proyecto, se eligió una sección trapezoidal, esto mediante el software H-CANALES,
determinando así todos los elementos geométricos, luego se hizo uso de una
herramienta computacional para el cálculo hidráulico de estructuras gracias a su
visualización grafica de datos y resultados, en función del cálculo del tirante normal,
tirante crítico, resalto hidráulico, curvas de remanso, se dio paso al diseño de rápidas
o caídas hidráulicas.
Los documentos se presentarán a la Junta de Riego Chacón Sevilla, para que hagan el
uso adecuado en beneficio de los usuarios, junto al estudio y diseño será entregado el
análisis de agua y los criterios de calidad admisibles que rige la Tabla 3 del Libro VI
del Texto Unificado Legislación Secundaria, Medio Ambiente, TULSMA
Keywords
CAÍDA HIDRÁULICA, RESALTO HIDRÁULICO, COEFICIENTE DE RUGOSIDAD, ECUACIÓN DE LA ENERGÍA, TOPOGRAFÍA, COEFICIENTE DE MANNING