Diseño de un sistema de filtración para aguas residuales de lubricadoras y concesionarias de la ciudad de Santo Domingo de los Colorados
No Thumbnail Available
Date
2023-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Because in the city of Santo Domingo de los Colorados wastewater is discharged
without prior treatment, thus harming the environment.
We began with the design of a filtration system for wastewater from lubricators and
concessionaires of which a prototype of the filtration system was made to scale to
observe its operation and check its efficiency, then a count of vehicles was made to
calculate the design flow taking as an example the washing and lubricating machine
"AUTO - SPA" in the city of Santo Domingo, with this data we proceeded to make a
prototype of the filtration system to scale, with which we conducted operational tests
obtaining an efficiency of 100 percent.
To test the efficiency of the prototype filtration system, two samples of wastewater
were taken, the first prior to the final discharge treatment at the aforementioned site
and the second was obtained from the prototype filtration system at the final discharge,
which consists of 5 stages to better treat the wastewater.
The parameters that were evaluated from the wastewater sample were Biochemical
Oxygen Demand (5 days), Chemical Oxygen Demand, Oils and Fats, Surfactants,
Total Suspended Solids, Total Petroleum Hydrocarbons and Total Solids.
With the data obtained from the samples, an analysis and comparison of data with the
discharge limits to the public sewage system according to TULSMA was performed.
Description
Debido a que en la ciudad de Santo Domingo de los Colorados descargan las aguas
residuales sin previo tratamiento, perjudicando de esta manera al medio ambiente.
Se inició con el diseño de un sistema de filtración para aguas residuales provenientes
de las lubricadoras y concesionarias del cual se realizó un prototipo del sistema de
filtración a escala para poder observar su funcionamiento y comprobar su eficiencia,
luego se realizó un conteo de vehículos para poder calcular el caudal de diseño
tomando como ejemplo la lavadora y lubricadora “AUTO – SPA” en la ciudad de
Santo domingo, con estos datos se procedió a realizar un prototipo del sistema de
filtración a escala, con el que realizamos pruebas de funcionamiento obteniendo una
eficiencia del 100 por ciento.
Para comprobar la eficiencia del prototipo del sistema de filtración se tomaron dos
muestras de agua residual, la primera previo al tratamiento de descarga final en el lugar
mencionado y la segunda se obtuvo del prototipo del sistema de filtración en la
descarga final, el mismo consta de 5 etapas para tratar de mejor manera el agua
residual.
Los parámetros que fueron evaluados de la muestra de agua residual fueron, la
Demanda Bioquímica de Oxígeno (5 días), la Demanda Química de Oxígeno, Aceites
y Grasas, los Tensoactivos, Sólidos Suspendidos Totales, Hidrocarburos Totales de
Petróleo y Sólidos Totales.
Con los datos obtenidos de las muestras se realizó un análisis y comparación de datos
con los límites de descarga al sistema de alcantarillado público según TULSMA.
Keywords
SÓLIDOS SUSPENDIDOS, SISTEMA DE FILTRACIÓN, AGUAS RESIDUALES, TRAMPAS DE GRASAS, TRAMPAS DE ACEITE, CARBÓN ACTIVO