Análisis de las correlaciones entre el CBR, DCP, propiedades índice y mecánicas en suelos de la provincia de Cotopaxi; del cantón Latacunga; parroquia Mulaló
No Thumbnail Available
Date
2023-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The investigative work is contemplated within a macro project belonging to the
parishes of the Cotopaxi province, whose purpose is to establish correlations between
the index and mechanical properties based on the CBR and DCP tests, to obtain CBR
values of the soil, but in function of these properties, thus speeding up the execution
time of the laboratory test and optimizing costs in them.
For this, field tests were carried out, which were: open pit (test pits), field density by
the Ottawa sand-cone method and DCP; Regarding the laboratory tests carried out, it
is detailed: moisture content, granulometry, specific gravity, Atterberg limits,
modified supervisor type B and CBR. Once the tests were completed, the results were
tabulated and then used in the elaboration of the correlations. In total, 20 correlations
were obtained, of which 15 were carried out with simple regression methods (linear,
polynomial, logarithmic) and 5 with the method of least squares (for correlations with
3 variables); these correlations have a degree of compensation greater than 50 percent,
which is statistically considered acceptable.
To complete the project, the flexible pavement design was carried out with the CBR
calculated in the laboratory, as well as the CBR obtained by the previously generated
correlations, as a result of which similar dimensions were obtained in the structural
package of the pavement with the two values of CBR.
Description
El trabajo investigativo está contemplado dentro de un macro proyecto perteneciente
a las parroquias de la provincia de Cotopaxi, cuya finalidad es establecer correlaciones
entre las propiedades índice y mecánicas en función de los ensayos CBR y DCP, para
obtener valores de CBR del suelo, pero en función de dichas propiedades, agilitando
así, el tiempo de ejecución del ensayo en laboratorio y optimizando costos en los
mismos.
Para ello, se ejecutaron ensayos de campo los cuales fueron: pozo a cielo abierto
(calicatas), densidad de campo por el método del cono - arena de Ottawa y DCP; en
cuanto a los ensayos de laboratorio realizados se detalla: contenido de humedad,
granulometría, gravedad específica, límites de Atterberg, proctor modificado tipo B y
CBR. Una vez culminado los ensayos, se procedió a entablar los resultados para luego
ser utilizados en la elaboración de las correlaciones. En total se obtuvieron 20
correlaciones, de las cuales 15 fueron realizadas con métodos de regresión simple
(lineal, polinómica, logarítmica) y 5 con el método de los mínimos cuadrados (para
correlaciones con 3 variables); estas correlaciones tienen un grado de correlación
superiores al 50 por ciento, que estadísticamente se consideran como aceptables.
Para culminar el proyecto, se realizó el diseño de pavimento flexible con el CBR
calculado en laboratorio, así como también el CBR obtenido por las correlaciones
generadas previamente, como resultado de ello se obtuvo dimensiones similares en el
paquete estructural del pavimento con los dos valores de CBR.
Keywords
PROPIEDADES ÍNDICE, PROPIEDADES MECÁNICAS, CORRELACIÓN, CBR, DCP, PAVIMENTO FLEXIBLE