Estudio para el mejoramiento del sistema de agua potable del barrio centro perteneciente a la parroquia Belisario Quevedo, cantón Latacunga, provincia de Cotopaxi
No Thumbnail Available
Date
2023-06
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The present study focused on the evaluation of the drinking water distribution network
to determine its hydraulic conditions and subsequent proposal of the improved
hydraulic network. This occurred due to the problems caused by the inadequate
management and control of the distribution network, which leads to a high rate of
unaccounted for water and intermittent service.
The field study began with the cadastre of the existing distribution network and the
hydraulic evaluation of the case, after which the topographic survey of the study area
was started, the different design parameters were determined with the help of the
Database of the Belisario Quevedo Drinking Water Administrative Board (JAAPBQ).
Finally, the evaluation and diagnosis of the current system was carried out,
determining that a redesign proposal is necessary.
The proposed distribution network is made up of main or transport pipelines, main and
secondary pipelines with a total redesigned length of 7.51 km. The hydraulic design
was analyzed under critical consumption conditions in the dynamic and static method
with the use of the EPANET software, taking into account the design parameters
established in the CPE INEN 5 Part 9.1:1992 standard. Finally, as a result it is
delivered: evaluation matrices, calculation memory and plans of the current and
redesigned distribution network.
Description
El presente estudio se centró en la evaluación de la red de distribución de agua potable
para determinar las condiciones hidráulicas de la misma y posterior propuesta de la
red hidráulica mejorada. Esto se realizó debido a la problemática ocasionada por el
manejo y control inadecuado de la red de distribución lo que conlleva al alto índice de
agua no contabilizada y al servicio intermitente.
Se inició con el estudio de campo realizando el catastro de la red de distribución
existente y la evaluación hidráulica del caso, posterior a ello se puso en marcha el
levantamiento topográfico del área de estudio, se determinaron los respectivos
parámetros de diseño con la ayuda de la base de datos de la Junta Administradora de
Agua Potable Belisario Quevedo (JAAPBQ). Por último, se realizó la evaluación y el
diagnóstico del sistema actual, determinando que es necesario una propuesta de
rediseño.
La red de distribución propuesta está conformada por tuberías principales y
secundarias con una longitud total rediseñada de 8.6 km. El diseño hidráulico fue
analizado en condiciones de consumo crítico en el método dinámico y estático con el
uso del software EPANET, tomando en consideración los parámetros de diseño
establecidos en la norma CPE INEN 5 Parte 9.1:1992. Finalmente, como resultado se
entrega: matrices de evaluación, memoria de cálculo, presupuesto referencial y planos
de la red de distribución actual y rediseñada.
Keywords
AGUA POTABLE, RED DE DISTRIBUCIÓN, SIMULACIÓN HIDRÁULICA, EVALUACIÓN HIDRÁULICA, AGUA NO CONTABILIZADA