Correlación entre el CBR, DCP, las propiedades índice y mecánicas en los suelos granulares de la parroquia San José de Poaló del cantón Píllaro, provincia de Tungurahua
No Thumbnail Available
Date
2021-06
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The aim of this research work is to determine the existing correlations between the
laboratory CBR, DCP, of the Index and Mechanical Properties, of the parish San José
de Poaló, For the execution of this project, samples were taken from 12 types of soils
located on the main roads of the sector.
After taking samples, field and laboratory tests are carried out to determine the
different properties of the analyzed soils.
Once data from the different tests carried out have been obtained, the most significant
correlations between index and mechanical properties are determined, taking into
account that these correlations help the optimization of time and resources on site,
giving a total of 22 correlations taking between two and three variables. The reliability
of these correlations varies between 50.25 percent to 97.53 percent, which is
considered an appropriate degree of reliability.
Regarding the determination of the CBR, it shows little variation, which is considered
a good relationship with minimal errors because the real value calculated by means of
laboratory tests indicates the same thickness of the different layers of a flexible
pavement.
Description
El presente trabajo de investigación tiene por objetivo determinar las correlaciones
existentes entre el CBR de laboratorio, DCP, de las Propiedades Índice y Mecánicas,
de la parroquia de San José de Poaló, para la ejecución de este proyecto se realizó la
toma de muestras de 12 tipos de suelos ubicados en las vías principales del sector.
Posteriormente de la toma de muestras se procede a realizar los ensayos de campo y
laboratorio para determinar las diferentes propiedades de los suelos analizados.
Una vez obtenido los datos de los distintos ensayos realizados se procede a determinar
las correlaciones más significativas entre las propiedades índice y mecánicas, teniendo
en cuenta que mediante dichas correlaciones ayude la optimización de tiempo y
recursos en obra, dando así un total de 22 correlaciones tomando entre dos y tres
variables. La confiabilidad de estas correlaciones varía entre el 50.25 por ciento hasta
un 97.53 por ciento por lo que se considera un grado de confiabilidad bueno.
Con respecto a la determinación del CBR denota poca variación por lo que se considera
una buena relación con errores mínimos debido a que el valor real calculado por medio
de ensayos de laboratorios indica el mismo grosor de las diferentes capas de un
pavimento flexible.
Keywords
CORRELACIÓN, CBR, DCP, PROPIEDADES ÍNDICE, PROPIEDADES MECÁNICAS, SUELOS RESIDUALES, SUELOS TRANSPORTADOS, PROCTOR MODIFICADO, CONO DINÁMICO