Diseño y construcción de una máquina semiautomática de inyección de plástico de 50G de capacidad para la empresa “D&J SECOIN CIA. LTDA.”
No Thumbnail Available
Date
2017-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
In the present project the design and construction of a plastic injection machine
with the capacity to manufacture pieces of up to 50 grams of weight for the
company “D & J SECOIN CIA. LTDA.” of the city of Quito. For the
development of this work has been considered the cost and size of the machine,
for that reason a study of the injection methods and the form of the injection
machines was carried out. This was carried out an analysis of the alternatives and
with this to establish the most suitable design option.
The calculations of all the mechanical parts and the selection of the elements that
integrated the machine were carried out, after which performance tests were
carried out to determine the feed rate, plastification temperature, injection time
and cooling. There has also been a manual of operation and maintenance of the
machine to provide safety to the operator and proper operation. The corresponding
plans for the construction of the injection machine were elaborated.
Description
En el presente proyecto se realizó el diseño y construcción de una máquina
inyectora de plástico con la capacidad de fabricar piezas de hasta 50 gramos de
peso, para la empresa “D&J SECOIN CIA. LTDA.” de la ciudad de Quito. Para el
desarrollo de este trabajo se ha considerado el costo y tamaño de la máquina, por
tal motivo se realizó un estudio de los métodos de inyección y de la forma de las
máquinas inyectoras para esto se realizado un análisis de las alternativas y con
ello establecer la opción más idónea de diseño.
Se realizó los cálculos de todas las partes mecánicas y la selección de los
elementos que integran la máquina, posteriormente se realizó pruebas de
funcionamiento para poder determinar velocidad de avance, temperatura de
plastificación, tiempo de inyección y enfriamiento, también se ha realizado un
manual de operación y mantenimiento de la máquina para brindar seguridad al
operario y un adecuado funcionamiento. Se elaboró los planos correspondientes
para la construcción de la maquina inyectora.
Keywords
MÁQUINA SEMIAUTOMÁTICA, INYECCIÓN DE PLÁSTICO, MÁQUINAS DE PISTÓN, MÁQUINAS INYECTORAS, MÁQUINAS DE INYECCIÓN, BOQUILLAS DE INYECCIÓN, MOLDES DE INYECCIÓN, ORIFICIOS, PIEZAS INYECTADAS