Evaluación de la planta de tratamiento de aguas residuales de la comunidad de Puñachizag, cantón Quero, provincia de Tungurahua
No Thumbnail Available
Date
2021-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The main objective of this research is to determine if the plant is operating optimally.
The evaluation of the community WWTP began with the gathering of information, a field
investigation which was used to take dimensions, inflow flows to determine the design
flow to be used. Wastewater samples were also taken, which were analyzed by an
accredited laboratory and whose results were compared with the limit parameters
established by the TULSMA 2015 regulation for wastewater discharges into freshwater
bodies, where it was found that the parameter oils and fats does not comply with the
standards, which showed that the WWTP is not working properly. Finally, a diagnosis
was made of each of the current treatment processes, where it was found that some of its
structures, such as the septic tank, do not meet the criteria and recommendations
established in the design manuals.
For the reasons mentioned before, it is proposed to incorporate a new treatment process
(fat trap) to treat the high value of that parameter. Also, to carry out a structure redesigns
that now, currently do not comply with the standards, and finally to incorporate an
operation and maintenance plan to ensure the correct operation of the WWTP through the
time.
Description
El objetivo principal de esta investigación es determinar si la planta se encuentra
funcionando de forma óptima.
La evaluación de la PTAR de la comunidad empezó con un levantamiento de información
y una investigación de campo para la toma de dimensiones, caudales de ingreso y así
determinar el caudal de diseño a utilizar. También se realizó la toma de muestras de agua
residual, mismas que fueron analizadas por un laboratorio acreditado y cuyos resultados
fueron comparados con los parámetros límites que establece la normativa TULSMA 2015
para descargas de aguas residuales en cuerpos de agua dulce. Donde se comprobó que el
parámetro aceites y grasas no cumple con dicha norma, lo cual indicó que la PTAR no
está funcionando de forma adecuada. Finalmente se realizó un diagnóstico de cada uno de
los procesos de tratamiento actual, en donde se encontró que algunas de sus estructuras
como es el caso del tanque séptico no cumple con los criterios y recomendaciones que
establecen los manuales de diseño.
Por las razones antes nombradas se propone incorporar un nuevo proceso de tratamiento
(trampa de grasas) para tratar el alto valor de dicho parámetro, realizar un rediseño de las
estructuras que actualmente no cumplen con las normas, y finalmente incorporar un plan
de operación y mantenimiento para asegurar el correcto funcionamiento de la PTAR a
través del tiempo.
Keywords
PTAR, TRAMPA DE GRASAS, AGUAS RESIDUALES, TULSMA 2015, TANQUE SÉPTICO