Análisis comparativo del diseño sismo resistente de estructura de hormigón armado basado en normativa ecuatoriana (NEC-SE-DS) y colombiana (NSR-10)
No Thumbnail Available
Date
2022-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
This paper focuses on reviewing the technical aspects and weaknesses of seismic
resistance codes in Ecuador and Colombia.
Within each code, the scopes, factors, and parameters involved in determining the
design spectrum and the design basal shear. It is intended to analyze the structure
through the Etabs software, for this, the most relevant parameters are collected:
location, site factors, the structural system, the design spectrum and the design base
shear to model the building according to the requirements required by the codes. Then,
the dynamic analysis was performed to determine the fundamental period of the
structure and verify them with the limits of the corresponding study codes. In the event
of non-compliance, the dimensions of the structural elements shall be increased and
the analysis carried out again.
Finally, the results of the seismic response were compared: vibration periods,
horizontal displacements, dynamic shears and story drifts, where the last three are
significantly affected by the design shear; will see the requirements of each code,
coming to know if our Ecuadorian norm is projected to be more rigorous than the
Colombian regulation.
Description
El presente trabajo se enfoca en revisar los aspectos técnicos y debilidades de las
normas sismorresistente de Ecuador y Colombia.
Dentro de cada norma se verán los alcances, factores y parámetros que intervienen en
la determinación del espectro de diseño y el cortante basal de diseño. Se pretende
analizar la estructura mediante el software Etabs, para ello, se recopilan los parámetros
más relevantes: ubicación, factores de sitio, el sistema estructural, el espectro de diseño
y el cortante basal de diseño para modelar la edificación de acuerdo con los requisitos
que las normas exigen. Luego, se realizó el análisis dinámico para determinar el
período fundamental de la estructura y verificarlos con los límites de las
correspondientes normas de estudio. En caso de no cumplir, se aumentarán las
dimensiones de los elementos estructurales y se volverá a realizar el análisis.
Finalmente, se realizó la comparación de los resultados de la respuesta sísmica:
períodos de vibración, desplazamientos horizontales, cortantes dinámicos y derivas de
piso, donde los últimos tres se encuentran afectados significativamente por el cortante
de diseño; se verán las exigencias de cada norma, llegando a saber si nuestra norma
ecuatoriana se proyecta a ser más rigurosa que el reglamento colombiano.
Keywords
NORMAS SÍSMICAS, DERIVAS DE PISO, CORTANTE DE DISEÑO, ESPECTRO DE DISEÑO, PERÍODO DE VIBRACIÓN, ANÁLISIS DINÁMICO, NEC-SE-DS, NSR-10