Estudio experimental de conectores de corte en la unión losa LOSA DECK - VIGA ACERO
No Thumbnail Available
Date
2021-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The present research work was developed through the use of different types of cutting
connectors the same ones that were selected by the characteristics they possess, the
capacity of effort and due to the use within the execution of works. The ones selected
for the development of the research work were rod type, screw type, stud type and
channel type, which are applied for purposes such as preventing horizontal sliding or
vertical separations between the beam and steed. These samples were made following
the AISC and ACI standards.
The samples taken were by the distribution of prototypes according to a certain number
and space where the shear connectors present their characteristics to the required tests
in order to analyze the influence of the shear connectors on the union of the metal
beam and deck slab. When conducting the test in the universal compression machine,
it was determined that the first failures appear regularly in the supports and bending
points of the beam. The fissures appeared on the edges of the prototypes, due to the
concentration of force in the center of the prototype.
Description
El presente trabajo de investigación se desarrolló mediante el uso de distintos tipos de
conectores de cortante los mismos que fueron seleccionados por las características que
poseen, la capacidad de esfuerzo y debido al uso dentro de la ejecución de obras. Los
seleccionados para el desarrollo del trabajo de investigación fueron de tipo varilla, de
tipo tornillo, de tipo stud y de tipo canal, los cuales son aplicados para propósitos como
el de impedir el deslizamiento horizontal o separaciones verticales entre la viga y la
losa. Estas muestras fueron realizadas siguiendo las normas AISC y ACI.
Las muestras tomadas fueron por la distribución de prototipos acorde a un determinado
número y espacio donde los conectores de cortante presentan sus características a los
ensayos requeridos con el fin de analizar la influencia de los conectores de corte en la
unión viga metálica y losa deck. Al realizar el ensayo en la máquina de compresión
universal se determinó que las primeras fallas se presentan con regularidad en los
apoyos y puntos de flexión de la viga. Las fisuras se presentaron en los bordes de los
prototipos, por la concentración de fuerza en el centro del prototipo.
Keywords
LOSA - DECK, VIGA - ACERO, CONECTORES DE CORTE, ENSAYO A FLEXIÓN, MÓDULO DE ROTURA, LOSAS COMPUESTAS, ASTM