Análisis del módulo de elasticidad estático del hormigón en base a su resistencia a la compresión, fabricado con materiales de las minas Pungal Grande y Miraflores, ubicados en el cantón Guano provincia de Chimborazo
No Thumbnail Available
Date
2023-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The present work has the purpose of providing information about the static elastic
modulus proposed by NEC-SE-HM, section 3.3.3, which refers to the equation established
by the ACI 318 committee. Analyzing the physical and mechanical properties for the
material stone from the mines: Pungal Grande and Miraflores in the canton of Guano,
province of Chimborazo.
The characterization tests of the materials were carried out as indicated in NTE INEN 872,
once the physical-mechanical characteristics of the materials were obtained, the final
dosages were made using the maximum density method for a compressive strength of 21
and 24 MPa at the 28 days old. During the preparation process of the mixture, tests were
carried out on the concrete in its fresh state, such as sampling according to NTE INEN
1763; the determination of settlement in accordance with NTE INEN 1578, the density,
performance and air content as indicated by NTE INEN 1579. And finally, the cylindrical
specimens were prepared in accordance with what is indicated by NTE INEN 3124.
Concluded with the curing process, we proceeded to the realization of tests of the concrete
in hardened state, obtaining its resistance to compression for ages of 7, 14, 21 and 28 days
according to what NTE INEN 1573 proposes.
Concluding with the experimental project, the static modulus of elasticity was determined
based on the process indicated by ASTM C469 and the tentative modulus with the
equation proposed in ACI 318, to finally compare and analyze them.
Description
El presente trabajo tiene la finalidad de aportar información acerca del módulo elástico
estático que propone NEC-SE-HM, sección 3.3.3, la cual hace referencia a la ecuación
establecida por el comité ACI 318. Analizando las propiedades físicas y mecánicas para
el material pétreo de las minas: Pungal Grande y Miraflores del cantón Guano provincia
de Chimborazo.
Se realizaron los ensayos de caracterización de los materiales como indica en NTE INEN
872, obtenidas las características físico-mecánicas de los materiales se realizaron las
dosificaciones definitivas utilizando el método de la densidad máxima para una resistencia
a la compresión de 21 y 24 MPa a los 28 días de edad. Durante el proceso de elaboración
de la mezcla se realizaron los ensayos del hormigón en estado fresco como son la toma de
muestras según NTE INEN 1763; la determinación de asentamiento de acuerdo con NTE
INEN 1578, la densidad, rendimiento y contenido de aire como indica NTE INEN 1579.
Y finalmente se elaboraron las probetas cilíndricas en conformidad con lo que indica NTE
INEN 3124. Concluido con el proceso de curado se procedió a la realización de ensayos
del concreto en estado endurecido, obtenido su resistencia a la compresión para edades de
7, 14, 21y 28 días de acuerdo como propone NTE INEN 1573.
Concluyendo con el proyecto experimental se determinó el módulo de elasticidad estático
basándonos en el proceso que indica ASTM C469 y el módulo tentativo con la ecuación
propuesta en ACI 318, para finalmente compararlos y analizarlos.
Keywords
MÓDULO ELÁSTICO, CARACTERÍSTICAS FÍSICAS, CARACTERÍSTICAS MECÁNICAS, MATERIALES PÉTREOS, PROBETAS CILÍNDRICAS, RESISTENCIA A COMPRESIÓN, FACTORES LOCALES